@article { author = {}, title = {-}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {2-2}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {10.24200/j30.2009.20026}, abstract = {-}, keywords = {-}, title_fa = {فهرست مقالات دوره ی 25، شماره 51.1}, abstract_fa = {-}, keywords_fa = {-}, url = {https://sjce.journals.sharif.edu/article_20026.html}, eprint = {https://sjce.journals.sharif.edu/article_20026_40aeae1d6822c4ee4a8200de38b2fa95.pdf} } @article { author = {Soltany, F. and kerachian, R. and Karamouz, M.}, title = {RESERVOIR OPERATION FOR WATER QUANTITY AND QUALITY USING ADAPTIVE NEURO-FUZZY INFERENCE SYSTEMS (ANFIS) AND GENETIC ALGORITHMS}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {3-10}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {In this study, an algorithm combining a GA-based optimization model and a water quality simulation model is developed for determining reservoir operating policies, considering water quality issues" To reduce the run time of the GA-based optimization model, a trained Adaptive Neuro-Fuzzy Inference System (ANFIS) is used for water quality simulation in a reservoir. The main problem is also decomposed to a long-term and an annual optimization model and it is shown that the proposed model does not reduce the accuracy of the reservoir operating policies. The reliability of the water supply is considered to be the objective function in the long-term stochastic optimization model. The operating rules obtained using this long-term model provide the time series of the optimum reservoir water storages at the beginning and end of each water year. In the next step, these optimal reservoir storage values are considered as constraints for annual reservoir operation optimization models (annual models), whose objectives are related to the allocated water quantity and quality. The proposed model is applied to the 15-Khordad Reservoir in the central part of Iran.}, keywords = {reservoir operation,genetic algorithms,water quality,ANFIS}, title_fa = {بهره‌برداری بهینه کمی ـ کیفی از مخازن سدها با کاربرد مدل‌های استنتاج تطبیقی عصبی ـ فازی ANFIS و مدل بهینه‌سازی الگوریتم ژنتیک}, abstract_fa = {در این نوشتار با تلفیق مدل‌های شبیه‌سازی کیفی مخزن و یک مدل بهینه‌سازی الگوریتم ژنتیک، سیاست‌های بهره‌برداری بهینه از مخزن سدها تدوین می‌شود. مدل شبیه‌سازی کیفی مورد استفاده در این تحقیق مدل استنتاج تطبیقی عصبی ـ فازی است، که در داخل فرایند بهینه‌سازی، وضعیت لایه‌بندی کیفی مخزن و همچنین کیفیت آب خروجی از دریچه‌ها را ارائه می‌دهد. در این تحقیق مدل کمی ـ کیفی بهینه‌سازی در افق بلندمدت، به یک مدل بلندمدت کمی و یک مدل سالانه‌ی کمی ـ کیفی شکسته می‌شود به‌طوری که حجم‌های بهینه‌ی مخزن در انتهای هر سال از مدل کمیِ بلندمدت به‌دست می‌آید و مدل سالانه‌ی کمی ـ کیفی، مقادیر بهینه‌ی خروجی از دریچه‌ها را با توجه به قیود حجم‌های انتهای سال، به دست می‌دهد. در این نوشتار تأثیر این فرض ساده‌کننده که زمان اجرا را به‌طور قابل ملاحظه‌یی کاهش می‌دهد در کاهش دقت جواب‌ها مورد بررسی قرار می‌گیرد. شبیه‌سازی کیفی مخزن با توجه به فرایند برداشت انتخابی از دریچه‌های مختلف صورت می‌گیرد. مدل پیشنهادی برای تدوین قوانین بهره‌برداری کمی و کیفی از مخزن سد ۱۵ خرداد که دارای مشکلات مربوط به کیفیت آب است، مورد استفاده قرار گرفته است.}, keywords_fa = {بهره برداری از مخزن سد,الگوریتم ژنتیک,کیفیت آب,ANFIS}, url = {https://sjce.journals.sharif.edu/article_28.html}, eprint = {https://sjce.journals.sharif.edu/article_28_576d5a3c48991db32bb6b76f45479580.pdf} } @article { author = {Ferasat, M. and Kermanshah, M.}, title = {NEURAL NETWORK APPROACH IN MODE CHOICE MODELING}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {11-18}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {Pricing policy is a method for controlling air pollution in urban central areas. The policy can be implemented on a daily basis, in such a way that the pollution level is kept close to its standard level. The ultimate goal of such a research can be the evaluation of a pricing policy for Tehran central zone areas by means of a set of mode choice models. Stated preference base mode choice models have been developed using the neural network concept; as an alternative to the existing choice model approach. Then, the models were compared with another set of models developed by the logit structure, based on the \percent of correct prediction" criterion. A rather marginal superiority of models based on the neural network approach can be reported.}, keywords = {mode choice model,artificial neural network model,Logit model,Pricing central zone areas}, title_fa = {کاربرد شبکه‌ی عصبی مصنوعی در مدل‌های انتخاب وسیله}, abstract_fa = {مسئله‌ی آلودگی هوا در محدوده‌ی مرکزی شهرها همواره مورد توجه برنامه‌ریزان شهری بوده است. یکی از روش‌های مدیریتی به‌منظور کاهش آلودگی هوا در این محدوده، اخذ عوارض ورودِ وسایل نقلیه به این محدوده است. سیاست قیمت‌گذاری در محدوده‌ی مرکزی شهر تهران موضوع مورد بررسیِ این پژوهش است. هدف از این پژوهش آگاهی از نحوه‌ی تغییر سهم وسایل نقلیه‌ی مختلف (شخصی، تاکسی، اتوبوس و مترو) به‌ازاء قیمت‌های مختلف ورود به این محدوده با استفاده از مدل‌های شبکه‌ی عصبی مصنوعی است. از دیگر اهداف این پژوهش، مقایسه‌ی مدل‌های لوجیت (که در پژوهش‌های انجام شده‌ی قبلی به‌کار گرفته شده) با شبکه‌ی عصبی بوده است. برای انجام این مقایسه در شرایطی کاملاً یکسان و برابر، از آمار استفاده‌شده در پژوهش‌های پیشین استفاده شده است.}, keywords_fa = {مدل‌های انتخاب وسیله,شبکه‌های عصبی,مدل‌های لوجیت,سیاست قیمت‌گذاری}, url = {https://sjce.journals.sharif.edu/article_29.html}, eprint = {https://sjce.journals.sharif.edu/article_29_0aad1f401dd4a3f80ec9a71eceeca371.pdf} } @article { author = {Zarhrai, B. and Roozbahani, A.}, title = {LONGTERM PRECIPIDATION FORECASTING USING CLIMATE SIGNALS CLUSTERING WITH RESPECT TO PRECIPITATION VARIATIONS WITH MODIFIED K-MEANS METHOD (CASE STUDY: PRECIPIDATION FERECASTING OF SISTAN-BALOUCHESTAN PROVINCE)}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {19-24}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {Studying climatic variations and finding different hydrological variables, such as precipitation, can be very useful in the prediction of these variables. Some recent research has tried to explain the relation between large scale climatesignals, like Sea Surface Temperature (SST), andsome hydrological variables, such as precipitation. Inthis paper, a novel method for clustering is presented,which is called \Modified K-Means". This method is based on the ordinary K-Means method, but the framework of selecting the cluster centers is modified in a way wherein clustering SST and its relation with precipitation are considered simultaneously. This model tries to find the relationship between climatic signals and precipitation variations. 20 rain gauges in the Sistan & Baluchestan province in Southeastern Iran have been considered in the case study. The use of the Modified KMeans method for showing the relation between precipitation in various seasons and temporal-spatial variations of SST is an innovative aspect of this paper.}, keywords = {Clustering,climate signals,modified K-Means,GA clustering,sea surface temperature (SST)}, title_fa = {پیش‌بینی درازمدت بارش با استفاده از خوشه‌بندی سیگنال‌های هواشناسی با توجه به تغییرات بارش به‌روش K_Means اصلاح شده مطالعه‌ی موردی: پیش‌بینی بارندگی استان سیستان و بلوچستان}, abstract_fa = {مطالعه‌ی تغییرات اقلیمی و شناسایی متغیرهای مختلف آب و هوایی (ازجمله بارش) کمک شایانی به پیش‌بینی این‌گونه متغیرها می‌کند. بیان ارتباط سیگنال‌های بزرگ مقیاس اقلیمی ـ مثل دمای سطح دریا (SST) ـ و متغیرهای مهم هیدرولوژیکی ـ مثل بارندگی ـ ازجمله تحقیقات صورت گرفته در سال‌های اخیر است. در این نوشتار روشی نوین با عنوان K_Meansاصلاح شده برای خوشه‌بندی ارائه شده است. برای بررسی کارایی مدل پیشنهادی از مطالعه‌ی موردی بر روی استان سیستان و بلوچستان، واقع در منطقه‌ی جنوب شرق ایران، استفاده شده است. در این مطالعه از اطلاعات بارش ۲۰ ایستگاه مختلف این استان استفاده شده است و خوشه‌بندی سیگنال هواشناسی SST در مناطق جغرافیایی منتخب در دریای عمان، دریای عرب و اقیانوس هند با توجه به تغییرات بارش این ایستگاه‌ها صورت گرفته است. استفاده از روش K_Means اصلاح‌شده برای خوشه‌بندی سیگنال‌های هواشناسی و ارائه‌ی الگوریتمی پویا برای بیان ارتباط بارش منطقه مورد مطالعه در زمان‌های مختلف با الگوهای خوشه‌بندی زمان ـ مکان از نوآوری‌های این تحقیق محسوب می‌شود.}, keywords_fa = {خوشه‌بندی,سیگنال‌های هواشناسی,K_Means اصلاح‌شده,خوشه‌بندی ژنتیک,دمای سطح دریا SST}, url = {https://sjce.journals.sharif.edu/article_30.html}, eprint = {https://sjce.journals.sharif.edu/article_30_194fd71064cb7ab4b0f20d1415a1b5e0.pdf} } @article { author = {Mortaheb, M. M. and Kavousian, A. E.}, title = {CONSTRUCTION AND DEMOLITION WASTE PRODUCTION AND MANAGEMENT IN DEVELOPING COUNTRIES (A CASE STUDY: TEHRAN METROPOLITAN, IRAN)}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {32-25}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {The construction industry is one of the most important sectors of economy in developing countries. This industry consumes enormous amounts of raw material and produces considerable waste. The optimization of construction material usage not only saves costs, but, also, can significantly contribute towards sustainable development. This article addresses construction waste management as an approach to improve construction productivity, with a focus on its application in developing countries. The status of construction waste production and management in Tehran metropolitan, Iran{as a developing country } is investigated and compared with the status of developed countries. Subsequently, barriers to implement concepts of construction waste management in Iran are addressed. Based on the findings of this study, it is shown that, in order to implement construction waste management in Iran's construction industry, the government should set rules and provide instructions on the issue; while constructors must design structures for minimum waste, and adopt modern construction methods, like prefabrication.}, keywords = {Management of construction waste}, title_fa = {تولید و سازمان‌دهی ضایعات ساختمانی در کشورهای در حال توسعه مطالعه‌ی موردی کلان‌شهر تهران}, abstract_fa = {صنعت ساخت‌وساز یکی از مهم‌ترین بخش‌های اقتصادی هر جامعه به‌شمار می‌رود. این صنعت سالانه حجم عظیمی از مواد خام هر کشور را مصرف و در مقابل مقدار زیادی ضایعات تولید می‌کند. بهینه‌سازی مصرف مصالح ساختمانی نه‌تنها هزینه‌ها را کاهش می‌دهد، بلکه کمک مؤثری به توسعه‌ی پایدار می‌کند. در این نوشتار، با تمرکز بر ساخت‌وساز در کشورهای در حال توسعه، مدیریت ضایعات ساختمانی به‌عنوان راهکاری برای بهبود بهره‌وری ساخت مورد مطالعه قرار می‌گیرد. وضعیت تولید و مدیریت ضایعات ساختمانی در کلان‌شهر تهران به‌عنوان منطقه‌یی در حال توسعه بررسی، و با شرایط کشورهای پیش‌رو در امر مدیریت ضایعات ساختمانی مقایسه شده است. در ادامه، موانع موجود در مسیر اجرای اصول مدیریت ضایعات ساختمانی در ایران مورد بحث قرار گرفته‌اند. براساس یافته‌های این تحقیق، برای اجرای راهکارهای مدیریت ضایعات ساختمانی در صنعت ساخت ایران، دولت باید ضمن تدوین قوانین مؤثر در این زمینه، به تدوین استانداردها و دستورالعمل‌هایی نیز اقدام کند. در مقابل، سازندگان باید سازه‌ها را راساس تولید کم‌ترین ضایعات طراحی کنند و روش‌های ساخت مدرن مثل استفاده از قطعات و بخش‌های پیش‌ساخته را به کار گیرند.}, keywords_fa = {مدیریت,ضایعات ساختمانی}, url = {https://sjce.journals.sharif.edu/article_31.html}, eprint = {https://sjce.journals.sharif.edu/article_31_015cc206789c041fc5743ef05788d65a.pdf} } @article { author = {Ghodrati Amiri, G. and Razavian Amrei, S.A. and Pashanejati, S.R.}, title = {SEISMIC HAZARD ASSESSMENT OF IMAM REZA (PEACE BE UPON HIM) HOLY SHRINE REGION}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {33-39}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {The objective of performing this research is to analyze the earthquake hazard and to provide the iso-acceleration maps for different seismic hazard levels in the area of Imam Reza's (Peace Be upon Him) holy shrine. Since the construction in the vicinity of the holy shrine goes back fifty years, and some structures are historical and religious, in order to properly design and optimize the historical places, it is needed to provide the design acceleration in different seismic hazard levels. So, by using different resources, the catalogue of the seismicity data; in the radii of 150 and 200 km of the area, have been collected and, then, the seismicity parameters have been computed by the Kijkio method. The seismicity parameters of the provinces, which have been presented by Mirzaei & et al., have been used. Then, the faults of the region have been detected and modeled and, by using the proper attenuation relationships and SEISERISK III software, the values of the acceleration at different levels are computed and the coeffcients of the logic tree are applied. Finally, the iso-acceleration maps are resulted.}, keywords = {seismic hazard assessment,seismic parameters,horizontal acceleration,vertical acceleration,mashhad,Imam Reza (peace be upon him)'s holy shrine}, title_fa = {تهیه‌ی خطوط هم‌شتاب طراحی براساس تحلیل خطر زلزله برای منطقه‌ی حرم مطهر امام‌ رضا (ع)}, abstract_fa = {هدف از انجام این تحقیق، تحلیل خطر زلزله و تهیه‌ی نقشه‌های هم‌شتاب برای سطوح خطر لرزه‌یی مختلف در حریم حرم مطهر امام‌رضا (ع) است. از آنجا که ساخت‌وسازهای حریم حرم مطهر امام‌رضا (ع) طول عمری بیش از ۵۰ سال دارند و برخی بناها نیز از ارزش و اهمیت تاریخی و مذهبی برخوردارند، به‌منظور طراحی مناسب و بهسازی لرزه‌یی ابنیه‌ی قدیمی و باارزش، تهیه‌ی شتاب طراحی در سطوح خطر لرزه‌ییِ مختلف مورد نیاز است. از این‌رو با استفاده از منابع مختلف، کاتولوگ داده‌های لرزه‌خیزی در شعاع ۱۵۰ و ۲۰۰ کیلومتری منطقه جمع‌آوری و سپس پارامترهای لرزه‌خیزی توسط روش کیکو محاسبه شد. در ادامه، گسل‌های گستره‌ی طرح شناسایی و مدل‌سازی شد و به‌کمک روابط کاهندگی مناسب، با استفاده از نرم‌افزار SEISRISKIII مقادیر شتاب در سطوح خطر مختلف محاسبه و ضرایب درخت منطقی بر آنها اعمال شد. در نهایت نقشه‌های هم‌شتاب حاصل شد.}, keywords_fa = {تحلیل خطر زلزله,پارامترهای لرزه‌خیزی,شتاب افقی,شتاب قائم,مشهد,حرم مطهر امام رضا ع}, url = {https://sjce.journals.sharif.edu/article_32.html}, eprint = {https://sjce.journals.sharif.edu/article_32_dd1c86564760097a3a497c8885a74a03.pdf} } @article { author = {Abbasnia, R. and Vetr, M. G. and Ahmadi, R. and Kafi, M. A.}, title = {AN ANALYTICAL AND EXPERIMENTAL STUDY ON THE DUCTILITY OF STEEL RINGS}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {41-48}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {Concentric braces are used widely in steel structures, due to ease, low implementation cost and reconstruction speed. In the last two decades, these benefits have created prime research incentives to increase their ductility. The usage of dutiable elements is one of the methods to increase ductility. In this article, a steel ring is used as a dutiable element. The extent of energy absorption and ductility is studied both analytically and experimentally. A steel ring can be welded to two steel plates and can easily be installed within concentric braces. The loading capacity of the steel ring is a function of its length, radius, thickness and yield stress. This property can be used to design a suitable ring, compliant to brace capacity. Results obtained show a high level of energy absorption and a good ductility for the steel ring.}, keywords = {ductility,experimentally,steel ring,brace}, title_fa = {بررسی آزمایشگاهی و تحلیلی شکل‌پذیری حلقه‌ی فولادی}, abstract_fa = {سهولت و هزینه‌ی پائین اجرای مهاربندهای هم‌محور، موجب کاربرد زیاد آنها در سازه‌های فولادی شده است. این مزایا انگیزه‌ی انجام تحقیقات به‌منظور افزایش شکل‌پذیری آنها در طی دو دهه‌ی گذشته بوده است. یکی از روش‌های افزایش شکل‌پذیری آنها استفاده از المان شکل‌پذیر در مهاربندهای هم‌محور است. در این نوشتار میزان جذب انرژی و شکل‌پذیری یک حلقه‌ی فولادی به‌عنوان المان شکل‌پذیر مورد بررسی تحلیلی و آزمایشگاهی قرار گرفته است. حلقه‌ی فولادی را می‌توان به دو صفحه‌ی فولادی جوش کرد و به‌راحتی در انواع مهاربندهای هم‌محور تعبیه کرد. ظرفیت بار حلقه‌ی فولادی تابع طول، شعاع، ضخامت و تنش تسلیم آن است و این امر امکان طراحی آن را متناسب با ظرفیت مهاربند فراهم می‌کند. نتایج این بررسی بیان‌گر جذب انرژی و شکل‌پذیری بسیار خوب حلقه‌ی فولادی و پشتوانه‌ی ایده‌ی جدید این نوشتار در چگونگی استفاده از حلقه‌ی فولادی است.}, keywords_fa = {شکل‌پذیری,آزمایشگاهی,حلقه فولادی,مهاربند}, url = {https://sjce.journals.sharif.edu/article_33.html}, eprint = {https://sjce.journals.sharif.edu/article_33_0e2f8404964dcac74dacc6083f98a60d.pdf} } @article { author = {Eslami, A. and Mehrdad, M. and Khosravi, M.}, title = {QUANTITY CONTROL OF GEOTECHNICAL PROPERTIES FOR GROUND IMPROVEMENT BY CPT AND CPTu RESULTS}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {49-59}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {In order to control and evaluate the adequacy of soil stability, the cone penetration test and the comparison of cone tip resistance, friction resistance and pore water pressure, before and after improvement processing, are used. In the present research, different methods of determining important geotechnical parameters, using CPT data, were discussed. 23 sites, including 18 sites with granular soil and 5 sites with fine soil, have been studied, in which the cone penetration test was performed, after and before ground improvement. For control the improvement quantity, after analyzing the measured CPT data, important geotechnical parameters, such as relative density, overconsolidation ratio, friction angle, undrained shear strength, shear wave velocity, Janbu modulus number, Young's modulus and the coeffcient of earth pressure at rest, were determined.A comparison of the suggested results showed good agreement with the results of other work and, therefore, one is enable to assess different aspects of ground modification.}, keywords = {ground improvement,quantity control,cone penetration test (CPT),cone tip resistance,pore pressure}, title_fa = {کنترل کمی ویژگی‌های ژئوتکنیکی خاک بهسازی شده با استفاده از نتایج CPT و CPTu}, abstract_fa = {در پروژه‌های بهسازی، اطمینان از حصول افزایش مقاومت و سختی کافی در خاک از اهمیت زیادی برخوردار است. به‌منظور کنترل و ارزیابی بهسازی می‌توان از آزمون‌های صحرایی و آزمایشگاهی و ازجمله آزمایش نفوذ مخروط و مقایسه‌ی مقاومت نوک مخروط ، اصطکاک جداری و فشار آب حفره‌یی ، قبل و بعد از بهسازی استفاده کرد. در تحقیق حاضر، روش‌های مختلف تعیین پارامترهای مهم ژئوتکنیک با استفاده از داده‌های )CPTu به‌منظور کنترل کمی عمل بهسازی مورد بررسی قرار گرفته است. در همین راستا ۲۳ سایت ـ شامل ۱۸ سایت با خاک دانه‌یی و ۵ سایت با خاک ریزدانه ـ که مورد بهسازی قرار گرفته و آزمایش نفوذ مخروط قبل و بعد از عمل بهسازی در آنها انجام شده بود، مورد تجزیه و تحلیل و نیز ارزیابی قرار گرفت. اغلب سایت‌های مورد نظر در کشورهای آمریکا، کانادا، مالزی و سنگاپور واقع‌اند و حدود ۷۵ پروفیل CPTu مورد تحلیل قرار گرفت. پس از تجزیه‌ی داده‌های CPTu مورد نظر، پارامترهای ژئوتکنیک مهم و ویژه برای کنترل کمی عمل بهسازی شامل تراکم نسبی ، نسبت پیش‌تحکیمی، زاویه اصطکاک داخلی ، مقاومت برشی زه‌کشی نشده ، سرعت موج برشی ، عدد مدول جانبو ، مدول ارتجاعی یانگ و ضریب فشار جانبی خاک در حال سکون محاسبه شد. مقایسه‌ی نتایج پیشنهادی و نتایج ارائه‌شده توسط سایر محققین در این زمینه تطابق خوبی مشاهده شد و با محاسبه‌ی موارد متعدد پارامترهای خاک، می‌توان ارزیابی از کفایت بهسازی به‌عمل آورد.}, keywords_fa = {بهسازی خاک,کنترل کمی,آزمایش نفوذ مخروط,مقاومت نوک مخروط,فشار آب حفره‌یی}, url = {https://sjce.journals.sharif.edu/article_34.html}, eprint = {https://sjce.journals.sharif.edu/article_34_c7b12cd81def8fc9dd89c95f2ebe6a94.pdf} } @article { author = {Mofid, M. and Hadjikhani, F. and Amirghiasvand, F. and Mohammadi, P.}, title = {AN ALGORITHM FOR SOLVING SPACE CONFLICTS IN SITE CONSTRUCTION}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {61-68}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {Ignorance of modern and scientific techniques, besides the lack of accurate and systematic management and the use of conventional methods, are the reasons behind much lower efficiency in the construction industry compared to developed countries. Selecting construction methods, scheduling activities, and planning the use of site space are the keys to constructing a project efficiently. During the construction process, a limited site will be occupied by a great number of temporary workers and facilities, as well as permanent ones. Since the limitation of workspace will greatly affect efficiency and the project critical path, it is important to precisely organize the available space to minimize con ict in the workshop (construction site) and the reduction of project costs. Site layout and activity scheduling have been tackled as independent problems, whose interdependence is often ignored at the planning stage and which causes many critical problems. In this paper, a method of space scheduling has been proposed, using mathematical sciences, management, conservation and computer programming.}, keywords = {Construction Management,building project,space interaction,algorithm}, title_fa = {الگوریتم حل تداخلات فضا در طول زمان در کارگاه‌های ساختمانی}, abstract_fa = {یکی از معیارهای سنجش صنعتی‌بودن کشورها حجم پروژه‌های عظیم عمرانی در آنهاست. عدم بهره‌گیری از دانش روز، بی‌توجهی به مدیریت ساخت صحیح و علمی، و استفاده از روش‌های قدیمی و ناکارآمد باعث شده است که بهره‌وری در این صنعت بسیار پایین‌تر از حد متعارف در کشورهای صنعتی باشد. در این نوشتار، با هدف بالابردن بازدهی کارگاه‌های ساختمانی، به بررسی عوامل این امر پرداخته شد. یکی از این عوامل تداخل منابع در طول زمان در فضای کارگاه است. بعد از مطالعه‌ی تحقیقات قبلی، بی‌توجهی به عامل زمان مورد توجه واقع شد و از آنجا که محدودیت فضای کاری بر بهره‌وری و مسیر بحرانی پروژه تأثیرگذار است، می‌بایست فضای موجود در کارگاه با دقت زیادی سازمان‌دهی شود تا تداخلات در سطح کارگاه کمینه شود و درنتیجه هزینه‌های مورد نیاز پروژه کاهش یابد. طرح جانمایی فضای کارگاه و برنامه‌ی زمان‌بندی فعالیت‌ها اگرچه به‌عنوان عوامل مستقل در یک پروژه دیده می‌شوند اما عدم توجه به وابستگی آنها موجب تغییرات چشمگیری در برنامه‌های زمانی، بودجه‌بندی و حتی عوامل ایمنی و انگیزشی افراد دخیل در پروژه می‌شود. در این تحقیق سعی شده است تا با بهره‌گیری از علوم ریاضی، مدیریتی، بهینه‌سازی و برنامه‌نویسی، روشی برای برنامه‌ی زمان‌بندی فضا ارائه شود.}, keywords_fa = {مدیریت ساخت,کارگاه ساختمانی,تداخل فضاها و الگوریتم}, url = {https://sjce.journals.sharif.edu/article_35.html}, eprint = {https://sjce.journals.sharif.edu/article_35_058070c2cfa3323bcecbcfb6a039069e.pdf} } @article { author = {Sabeti, H. and Javaherian, A. and Araabi, B. N.}, title = {PRINCIPAL COMPONENT ANALYSIS APPLIED TO SEISMIC HORIZON INTERPRETATIONS}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {69-76}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {}, abstract = {One of the most important stages in seismic interpretation is picking especial horizons in order to detect their underground downward and upward movements in an oilfield. Background noise, however, causes many dif- ficulties to this end. Considering a narrow window of a seismic section, whose re ectors are nearly horizontal, and applying a multivariate statistical method called the Principal Component Analysis, we find the largest eigenvalue that has the most contribution to the variance of data. Lower eigenvalues are subject to noise. Projecting data onto an eigenvector associated with the largest eigenvalue, we obtain a trace with sharper peaks and troughs. This method is applied to two synthetic models; horizontal re ectors and anticline. We, also, examine the window length and dominant frequency of the seismic wavelet. Obtained trace with significantly attenuated noise can be used for tracking weak horizons in a seismic section with a signal-to-noise ratio of 0.2. Dominant frequency cannot change the result considerably. Optimum window length is the area in which re ectors are horizontal. It is also applied to the real data of an oilfield in S.W. Iran. The obtained results were useful in picking some important horizons.}, keywords = {}, title_fa = {کاربرد تحلیل مؤلفه‌ی اصلی در تفسیر افق‌های لرزه‌یی}, abstract_fa = {یکی از مهم‌ترین مراحلِ تفسیر داده‌های لرزه‌یی، ردیابی افق‌های خاصی است که از نظر چینه‌شناسی حائز اهمیت‌اند. وجود نوفه در داده‌ها این مرحله از تفسیر را دچار مشکل می‌کند. در این نوشتار، با به‌کارگیری روش تحلیل مؤلفه‌ی اصلی و انتخاب پنجره‌یی باریک از مقطع مهاجرت داده شده، که در آن بازتاب‌ها تقریباً افقی‌اند، یک ردلرزه به‌دست می‌آید که در آن نوفه تضعیف شده و افق‌های ضعیف ممکن است آشکار شوند. در این مطالعه، این روش با استفاده از برنامه‌نویسی در محیط MATLAB روی داده‌های مصنوعی و واقعی اعمال شده است. مدل مصنوعی اول همان مدل لایه‌های افقی، و مدل مصنوعی دوم یک طاقدیس است که در هر دو مدل لایه‌هایی با اختلاف مقاومت صوتی کم تعبیه شده است. در مدل‌های مصنوعی نوع موجک لرزه‌یی، فرکانس غالب آن و پهنای پنجره‌ی انتخابی داده مورد ارزیابی قرار گرفته است. نتایج به‌دست آمده نشان می‌دهد که این روش قادر است بازتاب‌های ضعیف را تا نسبت سیگنال به نوفه‌ی ۰٫۲ بر روی مقاطع لرزه‌یی مصنوعی آشکار کند. نتایج حاصل روی مدل طاقدیس نشان می‌دهد که انتخاب پنجره‌ی داده در محل بازتاب‌های افقی شرط لازم برای کارایی این روش است. همچنین بازدهی این روش به نوع موجک لرزه‌ییبستگی ندارد. داده‌ی واقعی استفاده شده، قسمتی از مقطع لرزه‌یی منطقه‌ی جفیر در جنوب غربی ایران است.}, keywords_fa = {تجزیه‌ی بردار تکین,تحلیل مؤلفه‌ی اصلی,مقدار ویژه,بردار ویژه,ردیابی افق لرزه‌یی}, url = {https://sjce.journals.sharif.edu/article_36.html}, eprint = {https://sjce.journals.sharif.edu/article_36_e2db1e64bc46f27bb1f50e6cb621bd35.pdf} } @article { author = {}, title = {-}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {79-82}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {10.24200/j30.2009.20025}, abstract = {-}, keywords = {-}, title_fa = {چکیده انگلیسی دوره ی 25، شماره 51.1}, abstract_fa = {-}, keywords_fa = {-}, url = {https://sjce.journals.sharif.edu/article_20025.html}, eprint = {https://sjce.journals.sharif.edu/article_20025_26cd820bde3150afc0312a8af32c0161.pdf} } @article { author = {}, title = {-}, journal = {Sharif Journal of Civil Engineering}, volume = {دوره 25}, number = {51.1}, pages = {81-82}, year = {2009}, publisher = {Sharif University of Technology}, issn = {2676-4768}, eissn = {2676-4776}, doi = {10.24200/j30.2009.20024}, abstract = {-}, keywords = {-}, title_fa = {فهرست انگلیسی مقالات دوره ی 25، شماره 51.1}, abstract_fa = {-}, keywords_fa = {-}, url = {https://sjce.journals.sharif.edu/article_20024.html}, eprint = {https://sjce.journals.sharif.edu/article_20024_847387f394029c3da07b47189bb58c09.pdf} }