per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
3
11
1074
Article
تعیین نیروهای معادل استاتیکی زلزله بر روی شبکه های تخت و بررسی کارایی آنها
ASSESSMENT OF EQUIVALENT STATIC EARTHQUAKE LOADINGS ON DLG AND THEIR VERSATILITY
سروه احمدزاده
s.ahmadzadeh@azaruniv.edu
1
ارژنگ صادقی
a.sadeghi@azaruniv.ac.ir
2
دانشکده مهندسی عمران-دانشگاه شهید مدنی آذربایجان، تبریز
دانشکده مهندسی عمران- دانشگاه شهید مدنی آذربایجان، تبریز
سازههای مشبک فضایی یکی از انتخابهای رایج برای پوشش فضاهای بزرگ است. همچنین بهعنوان سرپناههای موقت پس از زلزلههای قوی و مخرب مورد استفاده قرار میگیرند و سبک و با درجهی نامعینی بالایی هستند. این دو خصیصه باعث شده است که مدتها تصور شود که آنها در برابر زلزله، آسیبپذیر نیستند. با اینحال، رخدادهای زلزله در کوبه (۱۹۹۵) نشان داده است که سازههای مذکور هر چند نسبت به سازههای متعارف ایمنتر هستند، ولی نباید آنها را مطلقاً مصون پنداشت. در پژوهش حاضر، خصوصیات دینامیکی، رفتار خطی، و غیرخطی شبکههای تخت دولایه مورد مطالعه قرار گرفته و نشان داده شده است که شبکههای ذکرشده در زلزله آسیبپذیر هستند، بنابراین باید به دقت طراحی شوند و برای محاسبه وتوزیع بار زلزلهی استاتیک معادل در جهت قائم بر روی شبکههای تخت دولایه فرمولهایی ارائه و با روابط موجود در آییننامهی چین، در رابطه با ارزیابی نیروی زلزلهی قائم بر روی شبکههای دولایه مقایسههایی انجام شده است.
Reticular space structures are widely selected as cover for large spaces, and are also used as refuge spaces for earthquake hit areas. Space structures are light and highly indeterminate and, for some time, these two properties caused researchers to take them as a-seismic structures. However, the 1995 Kobe earthquake in Japan showed that although space structures are safer than
conventional buildings, they are not completely a-seismic.Double layer grids (DLG) are one of the most frequently used types of space structure. The aim of this research is to introduce some relations for calculating the earthquake induced forces on these structures. The relations comprise of a) assessing the static equivalent vertical base shear of earthquake action on DLGs and b) assessing the distribution pattern of the vertical base shear on the nodes of these structures. These relations make assessment of the earthquake action on the double layer grids very easy and versatile.In this research, for assessment of the vertical equivalent static earthquake loading on double layer grids, a set of double layer grids are established. These grids have the same configuration but different dimensions. Also, five strong ground motions with high vertical components are selected. The acceleration records of the earthquakes are scaled for a very high seismic area. By numerous linear and nonlinear analyses, a formula for assessing the earthquake vertical base shear on DLGs is produced. Also, a set of equations for distribution of the base shear on the nodes of these structures is developed. In the final stage, the versatility of the equations is examined on some double layer grids, and a comparison is made with the results of the equations of the code of practice of China. It is shown that the introduced equations in this research make the DLGs safer against strong ground motions.
https://sjce.journals.sharif.edu/article_1074_8b7d0a29eb79c8e1c5f81643e2e24322.pdf
بار معادل استاتیکی
آنالیز دینامیکی
شبکه تخت دولایه
رفتار غیر خطی
آیین نامه چین
Equivalent static earthquake loading
code of practice of china
double layer grid
a-seismic
space structures
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
13
19
1080
Article
تأثیر تزریق باکتری بر روی کاهش سرعت فرسایش ماسه
EFFECT OF BIOGROUTING IN REDUCING THE EROSION RATE OF SAND
مینو امین
m.amin228@yahoo.com
1
سیدمحمدعلی زمردیان
mzomorod@shirazu.ac.ir
2
دانشکده کشاورزی، دانشگاه شیراز
دانشکده کشاورزی، دانشگاه شیراز
روش زیستٓـ تزریق، روشی نوین در مسائل ژئوتکنیک و اصلاح خاک بر مبنای رسوب کربنات کلسیم با استفاده از باکتری است. در این پژوهش از باکتری pasteurii Sporosarcina برای کنترل فرسایش ماسهی سیلیسی استفاده شده است. همچنین از آزمایش XRD برای بررسی رسوبات ایجادشده بر روی نمونهها و از دستگاه تابع فرسایش برای بررسی پارامتر فرسایشپذیری استفاده شده است. باکتری و محلول اوره به همراه کلسیم کلراید به طور جداگانه بر روی نمونهی ماسه تزریق شده و به مدت ۲۴ ساعت به حالت اشباع در آمده است. سپس محلولها از انتهای نمونه با استفاده از پمپ، تخلیه شدهاند. در این پژوهش تأثیر هوادهی در داخل باکتری و محلول اوره، که بهصورت اشباع بر روی سطح ماسه قرار گرفته است، بر روی پارامترهای فرسایشپذیری مورد ارزیابی قرار گرفته است. نتایج نشان داده است که ضریب فرسایشپذیری ماسه تا ۲ برابر در حالت تزریق به همراه هوادهی نسبت به حالت بدون هوادهی کاهش پیدا میکند. همچنین تکرار تزریق
نیز مورد ارزیابی قرار گرفته و ضریب فرسایشپذیری تا ۹۵\٪ کاهش پیدا کرده است. بنابراین اعمال هوادهی و همچنین تکرار تزریق باکتری و
محلول کلسیم کلراید باعث افزایش عملکرد روش زیستٓـ تزریق در کنترل فرسایش خاک میشود.
The simplest soil improvement processes are compaction and drainage. Other processes include improving the gradation of particle size and adding binders to weak soils. There are various treatment techniques available to improve the condition of poor or unstable ground by altering the nature of the soil in-situ. These methods are used when replacement of the in-situ soil is impractical because of physical limitations, environmental concerns, or is too costly. Biogrout is a new method in geotechnical problems and can induce soil improvement on microbial induced calcium carbonate precipitation (MICP). Biogrout may provide new opportunities for cost-effective and environmentally friendly processes. Bacteria produce the urease enzyme. This enzyme converts urea into ammonium and carbonate; finally producing calcium carbonate. The calcium carbonate forms a bridge between the sand grains, which increases the strength of the soil. In this study, the Sporosarcina pasteurii bacteria were utilized, an aerobic bacterium which exists pervasive in natural soil deposits, in order to control silica sand erosion. An XRD test was performed to evaluate the calcium carbonate precipitation. Erodibility parameters were obtained by erosion function apparatus (EFA). The test result consists of the erosion rate versus shear stress curve, and the slop of the curve is the erodibility coefficient, which represents the resistance of soil to erosion.Bacterial optical density (OD600) was 1($8\times10^7$ cell/ml) and cementation included 0.5 M urea and 0.5 M urea and 0.5 M calcium carbonate in all of samples. Bacteria and cementation were separately injected in soil and saturated for 24 hours, then, drained from the soil. The effect of aeration in the bacteria and cementation saturated in soil was investigated and results show that the sample with aeration decreased the erodibility coefficient twice as much as the sample without aeration. A repeat of grouting was investigated too and a reduction of erodibility coefficient was observed up to 95\% for sample D (bacteria and cementation were injected twice at an interval of 5 days) Consequently, biogrouting for is shown to have an appropriate performance in the control of sand erosion and can be used in the control of pier, contraction and abutment scour.
https://sjce.journals.sharif.edu/article_1080_2e913d85dbdfe75adec89732972ce358.pdf
تزریق باکتری
تابع فرسایش
Sporosarcina pasteurii
کربنات کلسیم
ضریب فرسایش پذیری
Biogrouting
sporosarcina pasteurii
erosion function apparatus
calcium carbonate
MICP
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
21
32
1086
Article
پیشبینی رفتار گسیختگی شاه تیر مرکب با سخت کننده طولی و پیشنهاد روش برآورد ظرفیت برشی
ULTIMATE SHEAR STRENGTH OF STEEL-CONCRETE COMPOSITE PLATE GIRDER WITH LONGITUDINAL STIFFENERS LOADED IN SHEAR
علی اکبر حیات داودی
farzad_hdavoodi@yahoo.com
1
ایوب دهقانی
ayoub.dehghani@research.uwa.edu.au
2
مجید قاسمی
madjid_ghasemi@qiau.ac.ir
3
دانشگاه آزاد اسلامی، واحد نجف آباد، گروه عمران، نجف آباد، ایران
گروه مهندسی عمران، دانشگاه خلیج فارس بوشهر
گروه مهندسی عمران، دانشگاه آزاد اسلامی واحد قزوین
در این پژوهش رفتار و بیشینهی ظرفیت برشی شاهتیرهای مرکب بتنیٓـ فولادی با سختکنندهی طولی در جان، تحت بارگذاری برشی بهصورت تحلیلی و عددی مورد بررسی قرار گرفته است. روش تحلیلی با درنظرگرفتن عملکرد میدان کششی در جان شاهتیر، گسیختگی برشی دال بتنی، و محل قرارگیری سختکنندههای طولی با موقعیتهای مختلف در جان رابطهسازی شده است. برای توسعهی روابط فرض شده است که هر پانل شاهتیر، مقاومت برشی مربوط به خود را ارائه میدهد. این فرض دربررسیهای المان محدود مختلف به اثبات رسیده است. دقت روش پیشنهادی با استفاده از تحلیلهای اجزاء محدود انجامگرفته بر روی شاهتیرهای مرکب، که چیدمانهای مختلفی از سختکنندههای طولی دارند، سنجیده شده است. رفتار غیرخطی مصالح و هندسهی شاهتیرهای مرکب با یک مدل سهبُعدی اجزاء محدود شبیهسازی شده است. نتایج این تحلیلها نشان میدهد که وجود سختکنندهی طولی در جان شاهتیر علاوه بر افزایش مقاومت کمانشی، مقاومت نهایی
برشی شاهتیر را نیز افزایش میدهد. همچنین مقایسهی نتایج بهدستآمده از روش تحلیلی با مدلهای اجزاء محدود نشان میدهد که روش تحلیلی قابلیت پیشبینی ظرفیت برشی نهایی شاهتیرهای با سختکنندهی طولی، دقت قابل قبولی دارد.
The contribution of longitudinal stiffeners to the shear capacity of composite plate girders has not been studied. This paper aims to investigate, both analytically and numerically, the ultimate shear strength of longitudinally stiffened simply supported steel-concrete composite plate girders under shear loading. In this study, a theoretical formula is proposed to estimate the ultimate shear strength of such girders. The proposed method is approximate, simple, does not require any complex mathematical operations and can be applied to composite plate girders at the preliminary stages of design. The proposed analytical method considers the tension field action within the plate girder web panel and the shear failure of the concrete slab. The method incorporates the effects of the concrete slab, composite action, and web shear buckling of the composite girder. The ultimate shear capacity of the composite plate girder may be considered as the combined shear strength resisted by the steel part of the girder and that by the concrete slab. These two components can be computed separately and summed up to obtain the shear strength of the composite girder. The method used to determine the shear strength of the steel part is similar to the Cardiff model, in which the web panels are assumed simply supported along the longitudinal and transverse edges.On the basis of previous experimental studies and detailed information obtained from finite-element studies, it may be considered that each individual subpanel in the longitudinally stiffened composite plate girder can develop its own tension field independently of adjacent subpanels. Furthermore, the web panels are assumed simply supported along the longitudinal and transverse edges. Three different locations of longitudinal stiffeners are investigated and appropriate analytical methods are proposed for each case. These locations are: close to the compression flange of the steel girder, near to the tension flange of the steel girder and in the middle of the plate girder.Several validated finite element models of the composite plate girders having different configurations of longitudinal stiffeners are also generated to verify the proposed method and compare the analytical and numerical outcomes. These three-dimensional finite element models are developed to account for the geometric and material nonlinear behavior of composite girders. The models are first verified by experimental values obtained for girders with no longitudinal stiffeners, which have been tested by other researchers, and, afterwards, different configurations of longitudinal stiffeners are added to the models.The calculated ultimate shear strengths using the proposed method are in good agreement with both numerical and experimental values. This indicates that the proposed analytical equations can be applied to predict the ultimate shear strength of the girders for design office use. In comparison with the un-stiffened girders, it is also observed that longitudinal stiffeners are able to reduce the buckling effects of the web steel plate, increase the elastic shear buckling strength, and, therefore, the ultimate shear capacity of the girders.
https://sjce.journals.sharif.edu/article_1086_cb05197a135e2b302af7af566caa0a4a.pdf
شاهتیرهای مرکب
سختکننده طولی
روش المان محدود
ظرفیت برشی
Composite plate girder
longitudinal stiffeners
Shear strength
non-linear finite element analysis
analytical method
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
33
44
1076
Article
سنتز نانوذرات دوفلزی Fe-Ni و بررسی کارایی آن در حذف رنگزای AR14 از محلول های آبی
SYNTHESIS OF BIMETALLIC NANOPARTICLES FE-NI AND INVESTIGATION OF THEIR PERFORMANCE IN AR14 DYE REMOVAL FROM AQUEOUS SOLUTIONS
مرضیه نیک صفت
marzieh.niksefat@modares.ac.ir
1
بیتا آیتی
ayati_bi@modares.ac.ir
2
دانشکده مهندسی عمران و محیط زیست - دانشگاه تربیت مدرس
دانشکده مهندسی عمران و محیط زیست- دانشگاه تربیت مدرس
در این پژوهش پس از ساخت نانوذرات دو فلزی آهنٓـ نیکل به روش رسوبدهی شیمیایی نمک آهن توسط احیاکنندهی قوی سدیم بورهیدرید توسط روشی ساده و قابل اجرا، کیفیت آنها با استفاده از روشهای XRD و SEM تعیین شده است. که مطابق آنها، اندازهی نانوذرات سنتزشده در محدودهی ۳۰-۲۰۰ نانومتر بوده است. سپس از آنها برای حذف رنگزای ۱۴AR \پانویس{acid red 14}، در سیستم دوغابی استفاده و پارامترهای مؤثر در حذف این رنگزا بهینه شده است. در ادامه، برای شناسایی سایر عوامل مداخلهکننده، آزمایشهای شاهد در شرایط بهینه انجام شده است. مطابق آزمایشهای انجامشده، شرایط بهینهی زمانی به دست آمده است که از نانوذرات تازه ساختهشده با غلظت نانوذرات برابر gr/L ۰٫۰۵ استفاده شده است، در زمانی که غلظت اولیهی رنگزا، mg/L ۲۰۰ و pH مساوی ۷٫۵ و دما حدود $25\pm2$ درجه سلسیوس بوده است. راندمان حذف در شرایط بهینه پس از ۲، ۳۰ و ۲۴۰ دقیقه به ترتیب به ۷۹٫۳۹، ۹۰٫۵۲ و ۹۴٫۴۲ درصد رسیده است.
According to studies, nearly 15 percent of synthetic dyes enter wastewater during production and consumption operations annually, which is very dangerous and causes many problems for the environment. Thus, removing these compounds is mandatory. NZVI can be used in detoxification of many environmental pollutants, as a reducing agent and catalyst. In order to develop the technology of NZVI, bimetallic nanoparticles are prepared by deposition of a noble metal, such as nickel, over iron nanoparticles. In this study, as a simple and applicable method in the laboratory, bimetallic nanoparticles, Fe-Ni, were made using the method of chemical deposition of iron chloride ({$FeCl_3$}.{$6H_{2}O$})by a strong reducer, sodium bohr hydride (NaBH4), under nitrogen gas. To ensure the size and nature of the nanoparticles, SEM and XRD experiments were performed. Then, the nanoparticles were used in a slurry system to remove the azo dye (ccid red 14). To achieve optimum conditions during the experiments,
the parameters of the dye initial concentration, nanoparticle dosage, pH, elapsed time from creation to implementation of the nanoparticles, shaking speed and temperature were investigated. Then, to identify other effective factors, a control experiment was performed under the optimal conditions and it was found that ethanol, nickel, and light do not have any effect on dye removal. The reducer, however, was able to remove the dye completely. Also, the use of nickel with 3 wt\% iron increased dye removal efficiency by 14.65\%. According to the survey conducted, optimal conditions were obtained when the tests were performed at temperatures of \ {$25\pm2 ^0C$} \ with newly synthesized nanoparticles that have 0.05 gr/L concentration with an initial concentration of dye equal to 200 mg/L and pH of 7.5 and a beginning mixer time of two minutes. These nanoparticles had very high activity, so, removal efficiency after 2, 30 and 240 minutes, was 79.39, 90.52 and 94.42 percent, respectively. Finally, LC-Mass experiments indicated that after 4 hours of reaction, the azo band in the dye was broken.
https://sjce.journals.sharif.edu/article_1076_0f9c475a5ef2033a780cdf459fa72816.pdf
سنتز نانو ذرات دو فلزی Fe-Ni
کارائی نانو ذرات Fe-Ni در حذف آلاینده
حذف رنگزا
اسیدقرمز14 (AR14)
Synthesis of bimetallic nanoparticles fe-ni
performance of bimetallic nanoparticles fe-ni in contaminants removal
dye removal
acid red 14
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
45
52
1083
Article
استفاده از میلگردهای کلاهکدار نزدیک به هم در اتصالهای تیر-ستون تحت بارگذاری چرخه یی
USE OF CLOSELY SPACED HEADED BARS IN BEAM-COLUMN JOINTS SUBJECTED TO CYCLIC LOADING
علیرضا پورحسن
ar.pourhassan@gmail.com
1
محمدرضا اصفهانی
esfahani@um.ac.ir
2
دانشکده مهندسی عمران، دانشگاه فردوسی مشهد
دانشکده مهندسی عمران، دانشگاه فردوسی مشهد
در دو دههی اخیر، میلگردهای کلاهکدار بهعنوان یکی از مناسبترین انتخابها جهت کاهش ازدحام میلگردها در اتصالهای تیرٓـ ستون بتن مسلح مطرح شدهاند. از طرفی، آییننامههای موجود از جمله آییننامهی ${\rm{ACI\,\,318\!-\!11}}$ در مورد فاصلهی آزاد میلگردهای کلاهکدار و استفاده از آنها در چند ردیف، کاستیهایی دارند. به علاوه، نیاز به دادههای آزمایشگاهی بیشتری در این زمینه احساس میشود. از طرف دیگر، اثر توأم پارامترهای طراحی میلگردهای کلاهکدار ممکن است پاسخ اتصال را تحت تأثیر قرار دهد. در این پژوهش، ۴ نمونهی اتصال خارجی تیرٓـ ستون با ترکیبهای متفاوت طول مهار، فاصلهی آزاد، و چیدمان متفاوت میلگردهای کلاهکدار براساس ضوابط لرزهیی ویژه با مقیاس ۳:۲ اندازهی واقعی ساخته شده و مورد آزمایش چرخهیی قرار گرفته و رفتار آنها براساس معیارهای پذیرش برای قابهای خمشی تحت شرایط ویژهی لرزهیی ارزیابی شده است. نتیجهی بررسیها نشان داده است که اتصالهای آزمایششده با میلگردهای با فاصلهی آزاد کمتر از مقدار تعیینشده در آییننامهها، رفتار مناسب لرزهیی نشان دادهاند.
Generally, a conventional 90-degree standard \ hook is used for the anchorage of reinforcing bars \ terminating within a \ beam-column joint. It is well accepted that hooked bars \ should be bent into the joint with the hook embedded as far as possible from the critical section. This requirement and the specified dimensions of standard hooks in the ACI 318 Code, however, often cause steel congestion in an exterior beam-column joint, thereby, making fabrication and construction difficult. Using headed bars offers a potential solution to this problem and can also ease fabrication, construction and concrete placement.Relevant provisions and limitations of headed deformed bars have been provided in the ACI 318-11 Code. Over the last two decades, many experimental studies have been carried out to evaluate the provisions of the ACI 318 Code for anchored headed bars. There is still a need for additional data for various design parameters, such as headed-bar clear spacing and the number of layers of beam reinforcing bars. In this regard, the current study investigates the applicability of closely spaced headed bars in the exterior beam-column joints of earthquake resistant structures. Four 2/3-scale exterior beam-column joint specimens were manufactured and tested under cyclic lateral loading. The variables in different specimens include clear spacing and the number of layers of the headed bars of the beam, and also the development length of the headed bars.The seismic \ performance of the \ tested \ beam-column joints is \ qualitatively evaluated based on the acceptance criteria in ACI374.1-05 entitled: ``Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary''. Evaluation of the specimens' load-displacement hysteretic behaviour and comparison of the test results with ACI 374.1-05 criteria, show that beam-column joints with closely spaced headed bars can exhibit satisfactory performance and adequate anchorage capacity. Test results also indicate that headed bars with a development length shorter than that provided by the ACI 318-11 Code can be effectively anchored in exterior beam-column joints under inelastic deformation reversals.
https://sjce.journals.sharif.edu/article_1083_5aea2bb2cf1133dcf519719756d508b1.pdf
اتصال تیر - ستون
بارگذاری چرخهای
بتن مسلح
طراحی لرزهای
میلگرد کلاهکدار
Beam-column joint
cyclic load
headed bar
Reinforced concrete
seismic design
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
53
62
1079
Article
مقایسه عملکرد لرزهیی و اقتصاد طرح دیوار برشی فولادی با سیستم های باربر جانبی متداول در ساختمان های فولادی
A COMPARISON BETWEEN SEISMIC BEHAVIOR AND ECONOMY OF STEEL SHEAR WALLS WITH COMMON LATERAL BEARING SYSTEMS IN STEEL STRUCTURES
سجاد پولکی
sajad_poulaki@yahoo.com
1
جعفر کیوانی
jkeyvani@khu.ac.ir
2
علی معصومی
massumi@khu.ac.ir
3
دانشکده فنی و مهندسی، دانشگاه خوارزمی
دانشکده فنی و مهندسی، دانشگاه خوارزمی
دانشکده فنی و مهندسی، دانشگاه خوارزمی
از جمله سیستمهای متداول در ساختمانهای فولادی، قابهای با مهاربندی ضربدری، قابهای با مهاربندی واگرا، قابهای خمشی متوسط، و قابهای با دیوار برشی فولادی هستند. دو پارامتر مهم برای انتخاب یک سیستم باربر جانبی مناسب، عملکرد لرزهیی و اقتصاد طرح است. در این پژوهش، قابهای دوبُعدی ۳ دهانهی ۴، ۸ و ۱۲ طبقه، که دهانههای وسط آنها مهاربندی شده یا دیوار برشی قرار گرفته است، با استفاده از روش استاتیکی معادل استاندارد ۲۸۰۰ ایران بارگذاری و سپس طراحی شدهاند. عملکرد لرزهیی قابها با استفاده از تحلیل استاتیکی غیرخطی و تحلیل دینامیکی تاریخچهی زمانی مورد مطالعه قرار گرفته است. با توجه به نتایج تحلیلها، قابهای با دیوار برشی فولادی بهترین عملکرد لرزهیی )سختی، شکلپذیری، جذب انرژی و ضریب رفتار( و قابهای با مهاربند ضربدری، نامناسبترین عملکرد لرزهیی را دارند. با توجه به محاسبات اقتصادی، قابهای با مهاربند واگرا، اقتصادیترین طرح و قابهای با دیوار برشی فولادی برای قابهای با ارتفاع کم، غیراقتصادیترین طرح را دارند، که هر چه ارتفاع قابها بیشتر میشوند، قاب با دیوار برشی فولادی اقتصادیتر میشود، تا درنهایت در سازههای بلند از بقیهی سیستمهای باربر جانبی اقتصادیتر میشود.
With regard to the benefits and drawbacks of all lateral load resisting systems, using the most appropriate, according to building conditions, can maximize the capacity of the structure. Concentric braced frames (CBF), eccentric braced frames (EBF), intermediate moment frames, and pin connection frames, as well as steel shear walls, are standard systems in designing steel buildings. Seismic behavior and the economy of the design are two fundamental factors for selecting an appropriate lateral load resisting system. In this research, 3-bay frames of 4, 8 and 12-stories, with a braced middle bay, have been designed using Iranian seismic code (standard No. 2800) by the equivalent static approach.PERFORM 4.0.2 has been used to evaluate the seismic function of structures. Therefore, the frames designed by PERFORM have been modeled and evaluated with nonlinear static analysis. Considering the capacity curve and the target displacement in various limit states of the structures, frames with steel shear walls give the best seismic behavior (in terms of stiffness, ductility and energy efficiency), whereas frames with CBF give the least desirable results (especially with less ductility compared to other systems). Due to the high magnitude welding needed for frames, the frames designed by EBF and steel shear walls are the best and worst economical designs, respectively In view of the economy of the project, as well as its seismic behavior, steel shear walls are the best selection for 12 story buildings. EBF is recommended in 4 and 8 story buildings, while CBF and moment frames are satisfactory in 4 story buildings.
https://sjce.journals.sharif.edu/article_1079_023d662647721a0b39e0e694195d93c9.pdf
دیوار برشی فولادی
سیستمهای باربر جانبی
عملکرد لرزهای
اقتصاد طرح
.PERFORM
steel shear wall
EBF
CBF
moment frame
seismic behavior
economy of the design
perform
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
63
72
1085
Article
مدل سازی رفتار چرخهیی سازهها با در نظر گرفتن اثرات باریکشدگی، کاهش سختی، کاهش مقاومت و لغزش
MODELING OF CYCLIC PERFORMANCE OF STRUCTURES CONSIDERING PINCHING, STIFFNESS DEGRADATION, STRENGTH DETERIORATION, AND SLIDING PHENOMENA
مهران زینلیان
m.zeynalian@eng.ui.ac.ir
1
مهدی مختاری
m.mokhtari.civil@gmail.com
2
حسین تاجمیر ریاحی
tajmir@eng.ui.ac.ir
3
گروه مهندسی عمران، دانشگاه اصفهان
گروه مهندسی عمران ، دانشگاه اصفهان
گروه مهندسی عمران، دانشگاه اصفهان
شناخت و بررسی دقیق عملکرد چرخهیی سازهها و توسعهی مدلهای تحلیلی پارامتری آن میتواند در پیشبینی و تخمین عملکرد و طراحی سازهها کاربرد زیادی داشته باشد. در این نوشتار به معرفی و توسعهی یک مدل ریاضی چرخهیی بر مبنای معادلات دیفرانسیل با مشتقات جزئی شامل تمامی اثرات کاهندگی از قبیل باریکشدگی، کاهش سختی، کاهش مقاومت، و لغزش پرداخته شده است. مدل ارائهشده براساس مدل توسعه دادهشده دکتر مستقل است؛ که برای انواع سیستمهای چند درجه آزادیٓـ چند خطی و با درنظرگرفتن هر یک از اثرات کاهندگی مذکور تحت تحریکهای دینامیکی بررسی و توسعه داده شده است. در مدل ذکرشده، مشخصات اصلی سیکلهای چرخهیی با استفاده از پارامترهای قابل اندازهگیری سیستم سازهیی از طریق آزمایش قابل محاسبه است. به منظور نشاندادن توصیف واقعی عملکرد سیستمهای چند درجه آزادی از طریق مدل پیشنهادی، مثالهایی تحت اثر بارهای هارمونیکی بیان شده است.
Nonlinear hysteresis behavior is an important inherited property of any structural system. The shape of structural hysteretic behavior is a result of either changing material properties beyond the elastic range or changes in structural geometry (e.g. buckling, cracks) due to the subjected loads. The hysteretic response of a structure depends not only on the immediate deformation of elements, but also on the past history of the deformations, as it represents the energy dissipated by the structure. While, in some cases, such as well-designed hot-rolled structures, the hysteretic loops are quite smooth and stable, in some other cases, like cold-formed steel structures, they exhibit pinching, stiffness degradation, load deterioration, and sliding. Increasing the displacement under strong dynamic forces such as earthquakes, the hysteresis cycles enter from the elastic phase into the plastic phase.
Hence, ignoring non-linearity in hysteresis behavior and neglecting degradation effects lead to ignoring much energy loss by dissipated energy mechanisms. Consequently, the designs would be uneconomical. In contrast, improper inclusion of \ the
nonlinear hysteretic \ performance, such as \ neglecting sliding and \ strength deterioration, causes non-conservative structural design. Thus, considering real plastic deformation and proper non-linear behavior are essential and important in the assessment of structural stability. In this paper, an analytical model is introduced to show the hysteresis behavior of the structures, considering degradation phenomena, including pinching, stiffness degradation, strength deterioration and sliding effects. This model is based on
a modified Mostaghel model, which is developed considering a single degree of freedom (SDOF) mechanical system; and is characterized using a system of partial differential equations and some specific functions which are mainly derived from the Signum function. The proposed model is developed to a multi-degree of freedom (MDOF) multi-liner model and would be able to capture the key features of the hysteretic cycles of any structure using some measurable system parameters through tests. In order to demonstrate the degrading phenomena of the hysteresis behavior of the structures, several examples are presented to show that the proposed analytical model is capable of providing realistic description of the structural hysteretic performance.
https://sjce.journals.sharif.edu/article_1085_2914d57097f293c8e42f4d2bf9032a64.pdf
رفتار چرخهیی
مدل تحلیلی
باریکشدگی
کاهش سختی
کاهش مقاومت
لغزش
Hysteretic behavior
analytical model
pinching
stiffness degradation
strength deterioration
sliding
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
73
80
1077
Article
ارائه مدلی برای برآورد تأخیر کاربران راه با استفاده از شبیه سازی نرم افزاری
ROAD USER DELAY ESTIMATION MODEL USING SOFTWARE SIMULATION
محمدرضا احدی
m.ahadi@bhrc.ac.ir
1
مهدی نصرالهی
nimaa_nasrollahi@yahoo.com
2
پیمان غلامین
peyman_gholamin@yahoo.com
3
پژوهشکده حملونقل، مرکز تحقیقات راه مسکن و شهرسازی
دانشکده مهندسی عمران، دانشگاه علم و صنعت ایران
دانشکده علوم ریاضی، دانشگاه آزاد اسلامی، واحد لاهیجان
انتخاب راهبرد مناسب در منطقهی عملیاتی و ارائهی تسهیلات به مسافران در این ناحیه، یکی از مباحث مهم در مدیریت منطقهی عملیاتی است. تأخیر ناشی از منطقهی عملیاتی یکی از مهمترین پارامترهای ایجاد اختلال در سیستم حملونقل است. این تأخیر عمدتاً به دلیل ایجاد صف و کاهش سرعت در این ناحیه رخ میدهد. برای ارائهی مدل تأخیر مناسب، ابتدا به کمک نرمافزار Aimsun اقدام به شبیهسازی میکروسکوپی منطقهی عملیاتی شده و میزان تأخیر حاصل از انسداد مسیر در حالات مختلف حجم ورودی به ناحیه و طول منطقهی عملیاتی اندازهگیری شده است. سپس با استفاده از نرمافزار ۲۱SPSS از مدل غیرخطی چندگانه، که دقت بالایی دارد، برای تأخیر منطقهیعملیاتی در راههای دوخطهی آزادراهی استفاده شده است. در نهایت به برآورد هزینههای تأخیر کاربران راه در آزادراه رشتٓـ قزوین در سال ۹۲ اقدام و در مورد هزینهی تأخیر هر یک از انسدادها در آزادراه به بحث پرداخته شده است.
Choosing and \ providing \ appropriate strategies and \ proper amenities for road users passing through work zones is an important topic in work zone management. Authorities have always faced issues in this regard, so, there is a need to create a balance between expediting construction projects and the cost to road users, while also keeping the limitations of available resources in mind. The delay caused by work zone activities is an important parameter that disturbs transportation systems. This delay mainly results from queue generation and subsequent speed reduction in the area. Since, in most cases, there is no likelihood of completely removing this delay, using appropriate delay models, it is feasible to get a realistic understanding of the costs imposed on road users, as well as making the best decision to reduce these costs. In order to develop an appropriate delay model, at first, the work zone was modeled using Aimsun microscopic simulation software. Next, the time delay produced by lane closure for different input volumes and work zone lengths was determined. According to the results, the volume-to-length of the work zone parameter is more effective when it comes to work zone delay. Afterwards, taking advantage of SPSS21 and evaluating various kinds of regression model, a multiple nonlinear model was recognized to better explain the work zone delay in freeway two-lane roads. Finally, the costs of work zone activities on the Rasht-Qazvin freeway in 1392 were calculated and the costs associated with each of lane closures were discussed in detail. Based on these results, as expected, the maximum average delays were a result of sudden and un-planned closures. However, for planned maintenance activities, the average delay was greatly reduced due to the ability to choose an appropriate time for the closure. Great care has been taken to produce a usable model based on historic data, which can be used as a tool for estimation of average delay. This model will enable authorities to choose a suitable time and strategy, in order to reduce road user delays.
https://sjce.journals.sharif.edu/article_1077_3b45b37c44c32b20c90bc763df72712c.pdf
منطقهی عملیاتی
زمان تأخیر
شبیهسازی میکروسکوپی
مدل غیرخطی چندگانه
Work zone
delay
microscopic simulation
multiple non-linear model
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
81
88
1087
Article
تجزیه و تحلیل غیرخطی سازههای بتنآرمه تحت بارگذاری مونوتونیک و دورهیی رفت و برگشتی با استفاده از روش اجزاء محدود
NONLINEAR ANALYSIS OF REINFORCED CONCRETE STRUCTURES UNDER MONOTONIC AND REVERSED CYCLIC LOADING USING THE FINITE ELEMENT METHOD
بیتا امیری
amiri_bita2@yahoo.com
1
امیرهوشنگ اخویسی
ahakhaveissy@razi.ac.ir
2
گروه مهندسی عمران، دانشگاه رازی کرمانشاه
گروه مهندسی عمران، دانشگاه رازی کرمانشاه
در این مطالعه از تجزیه و تحلیل اجزاء محدود غیرخطی برای پیشبینی رفتار سازههای بتنآرمه تحت بارگذاری مونوتونیک و دورهیی استفاده شده است. برای شبیهسازی رفتار غیرخطی بتن در فشار و کشش از سطح تسلیم HISS، که میتواند تغییرشکلهای کشسان و خمیری را در نظر بگیرد، استفاده شده است. برای حالات باربرداری و بارگذاری مجدد از معادلات ارائهشدهی دسای استفاده شده است، که در عین سادهبودن میتواند شبیهسازی رضایتبخشی از بارگذاری دورهیی ارائه دهد. مدل پیشنهادی بهصورت برنامهیی به زبان فرترن در قالب اجزاء محدود نوشته شده است، که در آن برای مدلسازی بتن از المانهای ۸ گرهیی سرندیپیتی و برای آرماتورها از المانهای ۲ گرهیی استفاده شده است. بهمنظور بررسی توانایی مدل پیشنهادی در پیشبینی رفتار غیرخطی سازههای بتنآرمه تحت بارگذاری مونوتونیک و دورهیی، یک قاب و یک تیر مدلسازی شده و نتایج بارٓـ تغییرمکان برای آنها بهدست آمده است. مقایسهی بارٓـ تغییرمکان بهدستآمده از این سازهها با نتایج آزمایشگاهی تطابق خوبی داشته است، که نشاندهندهی توانایی مدل پیشنهادی در پیشبینی رفتار غیرخطی سازههای بتنآرمه است.
In this study, for predicting the behavior of reinforced concrete structures under monotonic and cyclic loading, a nonlinear finite element analysis has been used. For simulation of the nonlinear behavior of concrete under pressure and tension, the hierarchical single-surface (HISS) plasticity model has been used that can take into account elastic and plastic deformations. It involves a single continuous yield surface, unlike some previous models that include multiple and discontinuous yield surfaces, which can introduce computational difficulties. This model, which allows for isotropic and anisotropic hardening and associated and non-associated plasticity characterizations, can be used to represent material responses based on the continuum plasticity theory. Cyclic
and repetitive loading, involving loading, unloading and reloading, occur in many problems, such as dynamics, earthquakes and thermo-mechanical responses. The unloading response is often nonlinear, However as a simplification, it is often treated as linear elastic. Here, both linear and nonlinear elastic simulations are included. During unloading and reloading, Plastic deformations
can occur and can influence the overall response of the structure. In this study, the Desai equations, which that are simple but can provide satisfactory simulation for the unloading and reloading states of reinforced concretes under cyclic loading are used. The elastic-perfectly plastic behavior of steel reinforcement is assumed. Then, in order to study the capability of the proposed models in the analysis of nonlinear finite elements of reinforced concrete structures under monotonic and cyclic loading, a program was written in FORTRAN language in a framework of the finite element. This program used eight- noded serendipity elements for concrete and two-noded elements for reinforced concrete. In order to study the capability of the proposed model in predicting the behavior of reinforced concrete structures under monotonic and cyclic loading, one beam and one frame have been modeled and the results of the load - displacement were found for them. Comparison between the load-displacement obtained from these structures with laboratory results show good agreement, and shows the capability and potential of the present model in investigating the nonlinear behavior of reinforced concrete structures.
https://sjce.journals.sharif.edu/article_1087_1287308e304f7ea55b3bfc0e47eaa1c5.pdf
سازههای بتنآرمه
بارگذاری مونوتونیک
بارگذاری دورهیی
تحلیل اجزاء محدود غیرخطی
مدل حالت خمیری سطح تسلیم سلسله مراتبی (HISS)
Reinforced concrete structures
monotonic loading
cyclic loading
nonlinear finite element analysis
hierarchical single-surface (hiss) plasticity model
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
89
97
1081
Research Note
بررسی آزمایشگاهی اثر رطوبت و نسبت تزریق فوم بر روی بهعملآوری خاک در تونلسازی با EPB-TBM
LABORATORY ASSESSMENT OF EFFECTING WATER CONTENT AND FOAM INJECTION RATIO ON SOIL CONDITIONING FOR EPB-TBM TUNNELING
صادق طریق ازلی
sadeghazali@gmail.com
1
محمد غفوری
ghafoori@um.ac.ir
2
غلامرضا لشگری پور
lashkaripour@um.ac.ir
3
جعفر حسن پور
hassanpour@ut.ac.ir
4
گروه زمین شناسی ، دانشگاه فردوسی مشهد
گروه زمین شناسی ، دانشگاه فردوسی مشهد
گروه زمین شناسی ، دانشگاه فردوسی مشهد
دانشکده زمین شناسی ، دانشگاه تهران
در تونلسازی با EPB-TBM، مصالح حفاریشده با فوم بهعملآوری میشوند، تا کارپذیری مناسب )محیط خمیری( به منظور اعمال فشار به جبههی کار را داشته باشند. عواملی که در کارپذیری مؤثرند، شامل: شاخص استحکام (Ic)، رطوبت، ذرات ریزدانه، و نسبت تزریق فوم )FIR( هستند. در این نوشتار، تأثیر پارامترهای مذکور در کارپذیری خاک با انجام ۶۶ آزمون آزمایشگاهی اسلامپ در دو محتوای رطوبت ۱۰\٪ (${\rm{Ic=1-1.25}}$) و ۲۰\٪ (${\rm{Ic=0.5-0.75}}$) بررسی شده است. نتایج آزمونهای آزمایشگاهی با روش رگرسیون چندمتغیره به منظور تخمین FIR با هدف دستیابی به کارپذیری مناسب خاک تجزیه و تحلیل و بهصورت نمودار و رابطهی معنیدار آماری در رطوبتهای مختلف ارائه شده است.
In EPB-TBM tunneling, a positive face control during tunnel excavation is delivered and the tunnel face is supported by pressure from the mass of remolded soil within the cutterhead chamber. EPB TBMs operate more effectively when the soil immediately ahead of the cutterhead and in the chamber forms a plastic plug, which ensures face support. The target properties for extracting soil in an EPB TBM can best be described as a soil matrix exhibiting a soft workable plastic consistency. The behavior of excavated soil from mixing up to extraction depends mainly on the property called workability of conditioned soil. Workability in simple terms can be defined as the ease with which the excavated soil can be mixed with additives, compressed in pressure chamber, flowed freely from the face and finally extracted from screw conveyor. Furthermore, the workability is an indicator for the plasticity of the support media, comparable to the consistency of cohesive grounds and thus a criterion for the applicability of EPB tunneling. The factors which effect the workability of conditioned soil are water content, fine grain, foam injection ratio (FIR). In this study, effecting 10 and 20 percentage of water content and FIR on workability of conditioned soil for EPB-TBM tunneling is assessed with laboratory slump test. The 66 laboratory trials of soil-foam-mixtures were made to investigate the influence of the mentioned parameters on workability of conditioned soil. To analyze the available data using statistical methods, relationships between mentioned parameters and slump test results were investigated. Results of analyzes show that there are a quantitative relation
between water content and the workability for the application of EPB shields. The present study clearly showed that the decrease of water content and FIR became stronger with the decrease of the slump of conditioned soil. Finally, in this study, a new empirical chart, for assessment of and workability of conditioned soil is suggested.
https://sjce.journals.sharif.edu/article_1081_23ff555e62ced42d856cb5144161860e.pdf
تونلسازی
فوم
کارپذیری
اسلامپ
EPB-TBM
EPB-TBM
tunnel
soil conditioning
workability
slump
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
99
110
1075
Research Note
بررسی تأثیر هندسهی فرازش در بهبود عملکرد لرزه یی گنبد دیامتیک تک لایه
STUDY OF PELLEVATION GEOMETRY EFFECTS ON IMPROVING SEISMIC PERFORMANCE OF SINGLE LAYER DIAMATIC DOMES
مریم داعی
maryam.daei@gmail.com
1
رحیما حقانی
rhaghani_2011@yahoo.com
2
مهرداد حجازی
m.hejazi@eng.ui.ac.ir
3
دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان
دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان
دانشکده مهندسی عمران و حمل و نقل، دانشگاه اصفهان
در بین سازههای فضاکار، گنبدها به دلیل دوام و پایداری بالا، جایگاه ویژهیی دارند. از آنجا که در سازههای فضاکار، تغییرات هندسه، اصلیترین
عامل تعیینکنندهی مقادیر کنشها هستند، در این نوشتار به بررسی اثر ایجاد فرازش و تغییر شرایط هندسی در عملکرد لرزهیی گنبد دیامتیک
تکلایه پرداخته شده است. در این راستا، نسبتهای هندسی خیز به دهانه در گنبدهای دیامتیک تکلایهی ساده در یک گروه بررسی و سپس در سه گروه دیگر، به نحوی که هندسههای مختلف پوشش داده شوند، فرازش در گنبدهای دیامتیک تکلایهی گروه اول اعمال شده است. با انجام آنالیز دینامیکی، تاریخچهی زمانی غیرخطی با استفاده از ۳ شتابنگاشتِ مناسب و مقیاسشده براساس ضوابط استاندارد ۲۸۰۰، عملکرد لرزهیی مدلها مورد بررسی و مقایسه قرار گرفته است. نتایج به دستآمده در این نوشتار، نشان دهندهی اثر مطلوب فرازش در کاهش وزن گنبدها و بهبود عملکرد سازهیی است، به گونهیی که میتوان با ایجاد فرازش مناسب تا حدود ۱۶\٪ در وزن گنبدها کاهش داشت.
Among different types of space frame, the dome holds a special position because of its structural stability. Since changes in geometry play a key role in the structural response of space frames, in this paper, the effects of applied pellevation with different geometry on improving the seismic performance of single layer diamatic domes are studied. For this purpose, one group, including simple single layer diamatic domes with different ratios of rise to span, has been created, and then, in another three groups, different types of pellevation are applied to the first group. Each group contains five models, and the defined groups have been generated in such a way that different possible geometries have been covered.In formex algebra, during the pellevation process, a geometric object is used to deform a part of the given configuration by pushing the object upwards. In this paper, barrel pellevation, which can be easily matched to diamatic domes, is applied via implementing the BAPLE function. The computer program, Formian, is used as a tool to configure the pellevated single layer diamatic domes.The nonlinear dynamic time history analysis is performed for the defined models, and the structural behaviors of the different systems are compared with
each other via frequencies and mode shapes. For non-linear time history dynamic analysis, three scaled ground motion records appropriate to the design hazard levels of the Iranian Seismic Code have been selected.Checking overall stability shows that dome deflection is the dominant design criteria, and, fortunately, it is possible to decrease the seismic deflection of diamatic domes via a change in geometry by applying proper pellevation.The results show the desirable effects on the weight reduction of pellevated domes. Structural performance has been improved, such as the weight of the dome can be reduced by about 16\% via choosing proper pellevation.
https://sjce.journals.sharif.edu/article_1075_a1d5775a7d9c46bcaa3fe8db872b7b7d.pdf
سازه فضاکار
گنبد دیامتیک
فرازش
آنالیز تاریخچه زمانی
نسبتهای هندسی بهینه
Space frame
diamatic dome
pellevation
time history analysis
optimum ratio of geometric
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
111
119
1078
Research Note
تجزیه و تحلیل روشهای آنالیز تاخیر مبتنی بر پنجرهها در برنامه Easy Plan و ارائه ی چهارچوب انتخاب مناسبترین روش آنالیز تاخیر
ANALYSING WINDOWS-BASED DELAY ANALYSIS METHODS IN THE EASY PLAN PROGRAM AND OFFERING A FRAMEWORK IN SELECTING THE BEST DELAY ANALYSIS METHOD
مجید پرچمی جلال
parchamijalal@ut.ac.ir
1
محمود گلابچی
golabchi@ut.ac.ir
2
الهام یوسفی
elham.yousefi1365@gmail.com
3
دانشکده معماری، دانشگاه تهران
دانشکده معماری، دانشگاه تهران
دانشکده معماری، دانشگاه تهران
یکی از مهمترین مشکلات در پروژههای ساخت، بروز تأخیر در اجرا و بهرهبرداری پروژه است، که اغلب باعث ایجاد ادعاهایی میان کارفرما
و پیمانکار میشود. این موضوع برای عوامل درگیر در پروژه، پدیدهیی حائز اهمیت است. وجود روشهای مختلف آنالیز تأخیر، این اهمیت را
دو چندان کرده و این موضوع جدالبرانگیز شده است. در این پژوهش، ابتدا به معرفی و مقایسهی کلی روشهای موجود آنالیز تأخیر در پروژهها پرداخته شده است، و سپس روشهای مبتنی بر پنجرهها، که نسبت به سایر روشها بهعنوان روشهای با دقت بیشتر شناسایی شدهاند، با بررسی نمونهی موردی در برنامهی Plan Easy، نتایج حاصل از هر روش تجزیه و تحلیل و با هم مقایسه شدهاند. روشهای مبتنی بر پنجرهها تا حدودی مشابهاند، ولی تفاوتهایی نیز دارند و برخی نتایج حاصل از آنالیز آنها متفاوت است. نتایج حاصل ازاین پژوهش، محدودیتهای هر یک از روشهای مذکور را نشان میدهد و به تحلیلگر در انتخاب روش آنالیز کمک میکند.
Delays in the execution and operation of construction projects are of serious concern. In general, delay is described as any kind of extra time taken beyond previous mutual agreement. This is influenced by a number of internal or external project parameters and often leads to problems and claims between owners, contractors and all parties involved. This issue is even more important in developing countries and is a crucial phenomenon for all involved parties of a contract. The importance of this issue has been compounded by the existence of different delay analysis methods and has made this issue a very challenging controversial area. Mostly, project managers and time scheduling analysts are faced with the problems of delay analysis and solving its induced claims. Furthermore, the system of delay analysis and evaluation is not included in most construction projects and, therefore, both contractor and owner may have differing views on delay analysis and its corresponding responsibilities. Thus, estimation of delay effects and determination of each party's responsibilities are critical. Hence, project managers and analysts must have an effective and efficient systematic approach for analyzing delays and determining responsibilities. In this paper, first, a general comparison on the current available methods for analyzing delays in construction projects is introduced. Then, a windows-based delay analysis, identified as a more accurate method than other effective methods, is presented. The results of each method are discussed and compared through a case study run by the Easy Plan program. Windows-based methods are somewhat similar to each other but still have some differences. Sometimes, their analysis results are different. The results of the present study demonstrate the limitations of each of these analysis methods and helps analysts in their proper selection. In fact, considering project conditions, analysts are assisted through defining and providing some effective rules.
https://sjce.journals.sharif.edu/article_1078_460920e147fb31d168acfb8afb7b492f.pdf
برنامهی Easy Plan
پروژههای ساخت
روشهای آنالیز تأخیر
روشهای مبتنی بر پنجرهها
Construction projects
delay analysis methods
easy plan program
window- based analysis
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
123
129
1082
Research Note
بررسی تاثیر اسلامپ بتن در ظرفیت باربری فشاری ریزشمع بتنی درجا (مطالعه موردی ساختگاه سرخرود)
A SURVEY OF CONCRETE SLUMP EFFECTS ON THE COMPRESSIVE CAPACITY OF DRILLED SHAFTS(CASE STUDY: SORKHROOD SITE)
عیسی شوش پاشا
shoshpasha@nit.ac.ir
1
رضا نورزاد
rn0864@gmail.com
2
محمدحسن کاشی پور
mh.kashipour@yahoo.com
3
سیدجواد جلالی
sj_jalali@yahoo.com
4
دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
دانشکده مهندسی عمران ، دانشگاه صنعتی نوشیروانی بابل
دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
در مناطقی با خاکهای سطحی که ویژگیهای مکانیکی ضعیفی دارند، استفاده از پیهای عمیق یکی از راه حلهاست. در این صورت، پیهای عمیق توانایی حمل نیروهای وارده را دارند. در این راستا، پژوهشگران با انجام پژوهشهای آزمایشگاهی به بررسی پارامترهای گوناگون تأثیرگذار در رفتار ریزشمع پرداختهاند. در این نوشتار، ظرفیت باربری ریزشمعهای منفرد درجای بتنی با بررسی تأثیر اسلامپهای متفاوت در خاک ماسهیی بد دانهبندی شدهی منطقهی سرخرود مورد بررسی قرار گرفته است. آزمایشهای ظرفیت باربری ریزشمع بر روی ۱۵ نمونهی ریزشمع به طول ۱۵۰ و قطر ۱۲ سانتیمتر انجام شده است. بتن ریزشمعها در ۵ گروه متفاوت با مقاومت فشاری ۲۱۰ کیلوگرم بر سانتیمتر مربع بوده است. طبق مشاهدههای تجربی، افزایش اسلامپ بتن تشکیلدهندهی بدنهی ریزشمع از ۱۰ به ۲۴ سانتیمتر منجر به افزایشی در حدود ۲ برابر در ظرفیت باربری ریزشمع شده است. در انتهای نوشتار، ظرفیت باربری ریزشمع با روشهای متداول مقایسه و مورد بحث قرار گرفته است.
Using deep foundations is a solution in regions with surface soil having poor mechanical properties. Indeed this kind of foundation can bear horizontal, gravitational and tensile forces. In this regard, researchers study effective various parameters on pile behavior in the laboratory, such as the effect of pile dimensions, soil properties, methods of installation, types of loading, and some other effective parameters. The bearing capacity of single drilled shafts with the effects of various slumps on poor gradation sandy soil is
investigated in this paper, in Sorkhrood. Experiments related to the bearing capacity of a pile using 15 pile samples with 150cm length and 12cm diameter have been undertaken. The concrete used in the piles is considered as 5 discrepant groups, with constant slump of 10, 12, 16, 20 and 24cm and a compressive strength of 210 kg/cm. A strong polymer pipe has been used as a casing, drilled step by step into the ground and then taken from the ground frequently. According to the experimental bservations, increasing the amount of concrete slump used in the pile body has a great influence on pile bearing capacity. It is shown that the bearing of compressive piles has been increased in the higher slumps. Increasing the amount of slump, due to the combination of the casing of the pile with the soil around the casing, changes some parameters of the soil, reducing the shaping. The amount of its influence leads to the double difference between the bearing capacity of the pile filled with the lowest slump and the pile filled with the highest slump. It is indicated that the method presented by Janbo \& Bousen is an entirely conservative method, while the method presented by Mayerhouf and Bousen is closest to the results of the bearing experiments in calculating the final bearing capacity. Finally, the bearing capacity of piles is investigated and compared with common methods.
https://sjce.journals.sharif.edu/article_1082_2939c85dd4ef3edb47b2038a0091a002.pdf
ریزشمع درجا
ظرفیت باربری
اسلامپ بتن
خاک ماسهیی سرخرود
Drilled shaft
bearing capacity
concrete slump
Sandy soil
case study
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
131
138
1084
Research Note
مقایسه آیین نامه های مختلف برای تعیین ظرفیت باربری محوری شمعها
COMPARISON OF DIFFERENT CODES FOR DETERMINATION OF THE AXIAL BEARING CAPACITY OF PILES
محمدمهدی احمدی
mmahmadi@sharif.edu
1
احسان کشمیری
eks_keshmiri@mehr.sharif.ir
2
دانشکده مهندسی عمران، دانشگاه صنعتی شریف
دانشکده مهندسی عمران، دانشگاه صنعتی شریف
علیرغم پیشرفتهای اخیر در ارائهی روشهای علمی در طراحی شمعها، تعیین ظرفیت باربری شمعها به دلیل لزوم لحاظکردن اندرکنش خاک و سازه در روشهای علمی، همچنان به روابط تجربی وابسته است. آییننامههای مختلف، روابط متفاوتی را برای محاسبهی ظرفیت باربری محوری شمعها ارائه کردهاند. ولی هر یک از روشهای مذکور با فرضیاتی تنظیم شدهاند که ممکن است تمامی آنها در شرایط کلی برقرار نباشد. در این نوشتار، فلسفهی طراحی بر مبنای روشهای قطعی و احتمالاتی و نیز مفهوم ضرایب اطمینان در آییننامههای طراحی: ساختمان، راه، سازهی دریایی، و پل مورد بحث قرار گرفته است. همچنین اصول طراحی شمع تحت بار محوری بر مبنای آییننامههای API )انجمن نفت آمریکا(، ۷Eurocode )استاندارد اروپا( و آییننامهی کانادا بیان و در قالب یک مثال عددی، رویکردهای مختلف طراحی براساس آییننامههای API و ۷Eurocode مقایسه شدهاند.
Despite recent developments in proposing a scientific method in pile design, determination of the capacity of piles is still complicated due to the importance of soil-structure interaction in piles. Different codes have proposed various methods for the axial capacity of piles; however, these methods are based on assumptions that are not applicable in all situations. Traditionally, engineers use safety factors to compensate for the uncertainties and balance between reliability and economy. This traditional method is called deterministic. However, deterministic methods are very subjective and are generally not based on a systematic assessment of reliability. Therefore, these methods may produce structures with some overdesigned components. For elimination of these deficiencies, reliability-based methods have been developed. The load resistance factor design (LRFD) is one of the most applicable reliability-based methods. Its advantage is consideration of the uncertainties in strengths and loads separately. In this article, design philosophies and safety factors in different codes are first explained. By comparison of load factors of the LRFD in 8 different codes, it can be concluded that offshore and bridge codes have wider ranges for load factors than building codes. Then, the axial design of piles, in accordance with the API code, Eurocode 7, and Canadian codes, is discussed. API proposes both LRFD and working stress design (WSD) methods for the design of offshore structures. A numerical example for the design of axially loaded pile following API is conducted to compare LRFD (reliability-based) and WSD (deterministic) methods of API. Results show that the required penetration depth computed in the LRFD method is a little higher, however; this conclusion is not generalized to other situations. The Eurocode suggests three approaches for the design of piles. The difference between these approaches is related to the way they use load and resistance factors. A numerical example for design of axially loaded pile, according to three approaches of the Eurocode, indicates that these three approaches give approximately similar answers; however, the third approach is rather more conservative.
https://sjce.journals.sharif.edu/article_1084_b998437ce47800f8e6184eaf279f6858.pdf
ظرفیت باربری محوری شمع
آیین نامه طراحی شمع
روش LRFD
Axial capacity of piles
pile design codes
IRFD method
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
149
150
1396
فهرست انگلیسی مقالات زمستان 95، شماره 4/2
-
-
-
https://sjce.journals.sharif.edu/article_1396_521b4c45eddb00a1df28b72f16dbb25e.pdf
-
-
per
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
2676-4776
2017-02-19
32.2
4.2
141
148
1395
چکیده انگلیسی مقالات زمستان 95، شماره 4/2
-
-
-
https://sjce.journals.sharif.edu/article_1395_9f1b1d5ca2ff88681fe33f2f59573e3d.pdf
-
-