دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
EFFECT OF ACQUISITION PARAMETERS ON THE RESOLUTION OF DISPERSION IMAGE IN MULTI-CHANNEL ANALYSIS OF SURFACE WAVES METHOD
ارزیابی تأثیر پارامترهای برداشت در وضوح تصاویر پراکنش در روش تحلیل چند ایستگاهی امواج سطحی
3
13
21836
10.24200/j30.2019.53491.2551
FA
سهراب
میراثی
دانشکده ی مهندسی عمران، دانشگاه آزاد اسلامی واحد شهرکرد
حسین
رهنما
دانشکده ی مهندسی عمران و محیطزیست، دانشگاه صنعتی شیراز
Journal Article
2019
05
18
Multi-channel Analysis of Surface Waves (MASW) is a method for determining the <br />
shear wave velocity profile in depth. Shear wave velocity is an important arameter for geotechnical, earthquake, and geophysical engineers. Configuration of data acquisition by the MASW method is variable based on the purpose of the work (depth of identification, data resolution, etc.). For instance, the resolution of dispersion image will be different according to the recorded data by different configurations of the MASW method. Hence, in this paper, the effects of data-acquisition parameters on the resolution of dispersion spectrum were evaluated in the frequency-velocity domain. These parameters consisted of the receiver spacing, length of the receiver array, offset, and the element size. Different receiver spacings with 8, 4, 2, and 1 meters were evaluated in two layered soil models with the shallow thickness of 2 and 4 meters. The distance between the source and the first receiver (offset) and the length of the receiver array were selected based on the desired depth and the maximum wavelength. In this regard, different lengths of the receiver array with dimensions of 96, 48, 24, and 12 meters were considered. Also, different sizes of elements (1, 0.5, 0.25, and 0.125 m) were selected based on <br />
the shortest wavelength. The results showed that the receiver spacing should be <br />
proportional to half of the shortest wavelength and minimum thickness of the <br />
shallow layer. The resolution range of the dispersion spectrum increased <br />
approximately twice by increasing the length of the receiver arrays from 12 m <br />
to 24, 24 to 48, and 48 to 96 m. Also, the results of the element resizing showed that considering 8 or more elements (10) in one wavelength would be necessary to obtain the optimal accuracy of the simulations. Generally, with regard to the condition of the site and the expected goal, it could be possible to obtain suitable results with desirable accuracy in field-data acquisition analysis and software simulations by utilizing the effect of the mentioned parameters in different ranges. Moreover, the presented result in this paper can be used as guidelines for field parameters related to data acquisition in the MASW method.
سرعت موج برشی از پارامترهای مهم برای مهندسان ژئوتکنیک، زلزله و ژئوفیزیک است، که از روش تحلیل چندایستگاهی امواج سطحی (MASW) تعیین میشود. نظر به هدف کار در روش اخیر (عمق شناسایی، وضوح نمایش دادهها و غیره)، نحوهی چیدمان و مشخصات تجهیزات برداشت شده و وضوح نتایج حاصل شده متفاوت است. در نوشتار حاضر، به ارزیابی پارامترهای مؤثر در دقت وضوح طیف پراکنش سرعت امواج رایلی در فضای سرعت ـ بسامد پرداخته شده است. نتایج بهدست آمده میتواند به عنوان راهنمایی برای انجام برداشتهای صحرایی و شبیهسازیهای نرمافزاری استفاده شود. پارامترهای ذکر شده، شامل: فاصلهی گیرندهها، طول آرایهی گیرندهها، دور افت و اندازهی المانها هستند. نتایج نشان دادند کوتاهترین طول موج و ضخامت لایهی سطحی، تعیینکنندهی فاصلهی بین گیرندهها و اندازهی المان است. همچنین طول آرایهی گیرندهها و دوراُفت باید براساس بزرگترین طول موج و عمق شناسایی انتخاب شوند.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
FREE VIBRATION ANALYSIS OF TRANSVERSE ISOTROPIC THICK RECTANGULAR PLATES ON TWO-PARAMETER PASTERNAK FOUNDATION
تحلیل ارتعاش آزاد صفحات مستطیلی ضخیم همسانگرد عرضی بر بستر دو پارامتری پاسترناک
15
27
21837
10.24200/j30.2019.53464.2560
FA
شایان
محمد علی زاده
دانشکده ی مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
بهرام
نوائی نیا
دانشکده ی مهندسی عمران - دانشگاه صنعتی نوشیروانی بابل
پروانه
ناطقی بابگی
دانشکده ی مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
Journal Article
2019
06
10
In this research, an exact solution for free vibration analysis of thick transversely isotropic simply supported rectangular plates on the Pasternak foundation was proposed using the displacement potential function method. By means of the proposed displacement potential functions for dynamic problems by <br />
Eskandari-Ghadi, the differential governing equations in terms of displacements <br />
were converted into two linear partial differential \ equations of second and <br />
forth order. These differential equations were solved based on the separation <br />
of variables \ method and satisfying exact boundary conditions. In order to <br />
validate the \ results, the obtained \ results were \ compared \ with \ other \ available analytical \ works for isotropic and transversely isotropic plates, and it <br />
indicated remarkable agreement. Having no simplifying assumptions for the <br />
strain or stress distribution in the plate thickness, the obtained results in <br />
this paper were applicable to any arbitrary plate thickness with no limitation <br />
on its thickness ratio such as thin, moderately thick, and thick plates. Thus, <br />
the obtained results of the present work can be used as a benchmark solution <br />
for other analytical and numerical studies. To investigate the effect of various parameters on the vibrational plate response, the precise non-dimensional frequencies were obtained in different range of thickness ratios, aspect ratios, elastic foundation coefficients, and mechanical characteristics of plates. It was observed that with increasing thickness ratio and aspect ratio of the plate, the non-dimensional natural frequencies of plate decreased and increased, respectively. In addition, comparative results of isotropic and transversely isotropic plates showed that shear modulus in transverse direction would have significant influence on the vibrational behavior of rectangular plates. It was shown that when the value of the thickness ratio increased, the sensitivity of non-dimensional frequency response to values of foundation stiffness coefficients decreased. In addition, it can be conducted that the effect of the shearing layer of elastic foundation coefficient value increased by increasing the thickness ratios of plates.
در پژوهش حاضر، به ارائهی روشی برای حل دقیق ارتعاش آزاد صفحات مستطیلی ضخیم همسانگرد عرضی بر بستر پاسترناک پرداخته شده است. بدین منظور، معادلات حاکم بر حسب توابع پتانسیل تغییرمکان بیان و به روش جداسازی متغیرها و با اعمال دقیق شرایط مرزی، حل و بسامد زاویهیی صفحه تعیین شده است. به منظور بررسی صحت محاسبات، نتایج حاصل از پژوهش حاضر، ابتدا برای حالت خاص صفحهی همسانگرد و سپس همسانگرد عرضی با دیگر منابع مقایسه و سپس تحلیل پارامتریک جهت تعیین بسامدهای بیبُعد ارائه شده است. نتایج نشان دادند که افزایش ضریب بستر همراه با افزایش بسامد بیبُعد بوده است، تا جایی که با افزایش سختی بستر از یک مقدار مشخص برای هر مود و ابعاد صفحه، تغییری در بسامد بدون بُعد رخ نداده است. همچنین با افزایش ضخامت، همواره بسامد افزایش نیافته است، که بسته به سختیهای بستر و صفحه، بسامد میتواند کاهش یابد. علاوه بر این، نتایج نشان دادند که تأثیر مدول برشی در بسامد، بیشتر از مدول کشسانی و ضریب پواسون بوده است.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
EVALUATION OF WATER RETENTION PROPERTIES OF HORMUZ ISLAND CALCAREOUS SOIL
ارزیابی خصوصیات نگهداشت آب خاک کربناته ی جزیره ی هرمز
29
38
21838
10.24200/j30.2019.53727.2581
FA
حبیب
شاه نظری
دانشکده ی مهندسی عمران، دانشگاه علم و صنعت ایران
سعید
کوزه گران
دانشکده ی مهندسی عمران، دانشگاه علم و صنعت ایران
یاسر
جعفریان
پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله
Journal Article
2019
05
25
The curve presenting the relationship between water content and the soil matric <br />
suction is called Soil Water Characteristic Curve (SWCC). The water retention <br />
potential of the soils is dependent on Grain Size Distributions (GSD), soil <br />
texture, and soils origins. Calcareous soils are soils with a high carbonate <br />
content, unique particle shapes, and high intraparticle porosity; and, they <br />
consist of skeletal remains of marine organisms. They are common in the tropics <br />
between $30^\circ$ North and South latitudes. Due to the nature of their origin, one of the most important attributes of the calcareous soils that makes their properties <br />
different from those of silicate soils is their significant intra-particle void <br />
space. The majority of near-surface soils are unsaturated over at least some <br />
portion of the year; consequently, the calcareous intra-particle porosity coupled with soil suction as the main characteristic of unsaturated soils signifies the necessity of the studies of calcareous soil behavior under unsaturated conditions. In this study, the Scanning Electron Microscopy (SEM) and Mercury Intrusion Prosimetry (MIP) tests were performed to study the particular microstructural characteristic of the calcareous soil particles compared with those of silicate soils. Besides, a series of tests were conducted for determining the Soil Water Characteristic Curve for different gradations of calcareous soil (from Hormoz Island of Iran) and reference Silicate soils using pressure plate and controlled-suction oedometer apparatuses in Laboratory of Soil Mechanics (LMS) at Ecole <br />
Polytechnique Federale de Lausanne (EPFL). Studies on the soil textures have revealed a further level of porosity in calcareous soil due to its intra-particle pores and the samples with larger grain sizes showed higher intra-particle porosity. The pressure plate test results showed that for similar gradations of silicate and <br />
calcareous soil in higher suctions, the calcareous soil retained much more <br />
water than the silicate soil due to its intra-particle voids. The controlled-suction oedometer showed that owing to their microstructural pores, the hydraulic hysteresis behavior of the calcareous soils would be different from that of the silicate soil.
خاکهای کربناتهی اسکلتی، خاکهایی با ترکیبهای کربناتی، مانند صدفها و صخرههای مرجانی خرد شده هستند که عموماً در مناطق گرم حارهیی و استوایی در جهان یافت میشوند. در پژوهش حاضر، به عنوان گامی پایهیی و مهم در ارزیابی رفتار غیراشباع خاکهای کربناته، به مطالعهی رفتار خاکهای مذکور در شرایط غیراشباع شامل پتانسیل نگهداشت آب و رفتار هیسترزیس هیدرولیکی آنها پرداخته شده است. مطالعات کنونی بر روی خاک کربناتهی جزیرهی هرمز با دانهبندیهای مختلف صورت گرفته و نتایج حاصل با نتایج آزمایشهای مشابه بر روی خاک سیلیکاتهی کشور هلند با دانهبندی مشابه به عنوان خاک مرجع مقایسه شده است. همچنین حفرههای درون ذرهیی و بافت خاص خاک کربناته و تأثیر آن در رفتار خاک کربناته در شرایط غیراشباع ارزیابی شده است. آزمایشهای پژوهش حاضر، در آزمایشگاه مکانیک خاک دانشگاه پلیتکنیک فدرال لوزان انجام شده است.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
AUTOMATED ASSESSMENT OF FALL HAZARD RISK USING BUILDING INFORMATION MODELING AND IMAGE PROCESSING
ارزیابی خودکار ریسک سقوط از ارتفاع با استفاده از مدل اطلاعاتی ساختمان و پردازش تصویر
39
47
21848
10.24200/j30.2020.53198.2539
FA
محمد
رسولی منش
دانشکده ی مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر
حسین
تقدس
دانشکده ی مهندسی عمران و محیط زیست ، دانشگاه تهران
0000-0002-5117-7987
فرزاد
چوکان
دانشکده ی مهندسی عمران و محیط زیست، دانشگاه تهران
مصطفی
داداشی حاجی
دانشکده ی مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر
محمدحسین
تمنایی فر
دانشکده ی مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر
Journal Article
2019
07
10
Statistics of Occupational Safety all around the world shows that construction <br />
<br><br><br><br>industry in many countries such as Iran experiences one of highest accident <br />
<br><br><br><br>rates among all industry sectors; therefore, safety has a prominent role in <br />
<br><br><br><br>construction project progress which is related to injury and fatality rates of the project. Falls from height can be enumerated as a major concern because they contribute to a great part of fatalities in construction projects. Various studies have been conducted to assess the risk and enhance safety on the job site. Because of the inefficiency of traditional risk assessment methods (e.g., expert view gathering and documentation of past incidents), novel trends and technologies such as Building Information Modeling (BIM) were utilized to fulfill the gaps. Automation in the hazard recognition was also utilized in some previous studies to enhance the safety on the job site. This study presents a novel framework to identify and rank the hazardous areas regarding the fatal fall hazard risk drivers on construction projects through the execution phase. The developed framework employs a customized Application Programming Interface (API) to identify the probability of falling from the height in each opening area based on the BIM approach. It also makes use of an image processing analytical model to identify the softness of the surface underneath to estimate the impact of the risk factors that can be used in <br />
<br><br><br><br>safety planning process. Thus, the developed framework assists the safety <br />
<br><br><br><br>managers on the job sites to identify the fall risk factors automatically. The <br />
<br><br><br><br>obtained results in a commercial case study indicate that this model is capable <br />
<br><br><br><br>of anticipating the fall risk appropriately. Moreover, it was shown that edges <br />
<br><br><br><br>of surfaces would be more prone to be dangers than internal ones and height of <br />
<br><br><br><br>fall was the factor most affecting the results.
آسیبهای جانی کارکنان پروژه را میتوان بهعنوان یکی از مهمترین عوامل در ایمنی پروژه برشمرد. روشهای سنتی مانند استفاده از نظر خبرگان و مستندات حوادث پیشین، کارایی پایینی در شناسایی و تعیین میزان خطر ریسکهای ایمنی دارد و رویکردهای نوین، همچون: مدلسازی اطلاعات ساختمان، پیادهسازی فرایندهای شناسایی ریسکهای ایمنی و رتبهبندی<br /><br /><br /><br />
آنها را امکانپذیر میکنند. در پژوهش حاضر، مدلی جهت شناسایی و معرفی ریسکهای ایمنی در پروژهها معرفی شده است که محرکهای ایمنی را در نقاط مختلف پروژه شناسایی و رتبهبندی میکند. تأثیر عامل افزایش ارتفاع و جنس سطح زیرین برای ارزیابی خطر سقوط از ارتفاع بررسی و از مدل اطلاعاتی ساختمان برای مجسمسازی نتایج بهمنظور کاربرد در مدیریت ایمنی پروژه استفاده شده است. اطلاعات ورودی با استفاده از پردازش تصویر فراهم شده است که در پایگاه داده به مشخصات المانهای ساختمانی مرتبط میشوند. نتایج حاصل از پژوهش حاضر بهمنظور پیشبینی مخاطرات سقوط از ارتفاع قابل استفاده است و قابلیت شناسایی و رتبهبندی نقاط حادثهخیز را دارد.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
NUMERICAL MODELING OF INTERACTION BETWEEN MARINE WAVES AND INFLATABLE MARINE STRUCTURES
مدل سازی عددی اندرکنش امواج دریا با سازه های ساحلی از نوع غشاء بادشونده
49
60
21839
10.24200/j30.2019.53845.2592
FA
نگار
محبعلی
دانشکده ی مهندسی عمران، دانشگاه صنعتی اصفهان
عبدالرضا
کبیری سامانی
دانشکده ی مهندسی عمران، دانشگاه صنعتی اصفهان
بیژن
برومند
دانشکده ی مهندسی عمران، دانشگاه صنعتی اصفهان
Journal Article
2019
07
22
Inflatable marine structures are flexible cylindrical structures attached to a rigid base. These structures are generally cylindrical tubes, made of rubberized material, and inflated by air and/or water. Although these structures are permanently inflated, they have the advantage of being deflated and lie flat when not needed and then, inflated in a short period when required. They are relatively easy to install, do not corrode, require little maintenance, and have the capability to withstand extreme temperatures. Due to elasticity of the structure and continuous variation of its shape during operation, inflatable breakwater or sea-wall structural and hydraulic analyses are more complicated than the rigid types. Large deformation of the membrane due to the internal and external loads makes the governing equations of such problems non-linear and complex. In the present study, the behavior of an inflatable marine structure under loading by marine waves was simulated based on 2D numerical modeling. For this purpose, the deformed equilibrium geometry of the breakwater was calculated by solving the prevailing equations through the linear dynamic response of the system. The central difference method was employed to solve the governing equations of the linear dynamic response of the system of finite elements. According to the results of former studies, for 2D modeling of the aforementioned problem, the length of the tube was assumed infinity. Therefore, the effects of lateral supports and boundary conditions were neglected. This study carried out the numerical analysis of the inflatable marine structures for solving the flow-based problem associated with static and dynamic structural analyses. For this purpose, the two-dimensional <br />
fluid-structure interactions were analyzed numerically. It was shown that the <br />
equilibrium shape of the structure was a function of rubber thickness, elasticity modulus of the material, internal pressure, the dam foot width, and external loads. All the influential parameters of both flow and structure including internal pressure, water depth, wave height, wave period, etc. were attained based on the dimensional analysis. Accordingly, the results describing height and cross-sectional profile of the inflatable tubes loaded by marine waves were obtained.
در پژوهش حاضر، با استفاده از آنالیز دینامیکی به حل معادلهی حاکم بر تغییرشکل تیوبهای لاستیکی مستقر در حاشیهی ساحل در حالت دوبُعدی تحت بارگذاری ناشی از امواج منظم و فشار داخلی ناشی از سیال پُرکنندهی تیوب پرداخته شده است. حل دوبُعدی از طریق کدنویسی توسط نرمافزار متلب و با استفاده از روش تفاضل مرکزی برای سازه و مشخصات موج منظم به دست آمده از تئوری موج با دامنهی کوتاه صورت گرفته است. برای دستیابی به شکل تعادلیافتهی تیوبهای لاستیکی، آنها در سه حالت مهار شده به کف در دو نقطه، مهار شده به کف در یک نقطه و بدون مهار، مدل شدهاند. بر اساس نتایج به دست آمده، تیوب مهار شده در یک نقطه نسبت به تیوب مهار شده در دو نقطه، حالت برافراشتهتری داشته و در نتیجه، ارتفاع بهرهبرداری آن بیشتر و خمیدگی آن به سمت پاییندست کمتر بوده است. ضمناً دو تیوب با مشخصات یکسان، یکی با مهار و دیگری بدون مهار، ارتفاع بهرهبرداری یکسانی ندارند و تیوب بدون مهار در ارتفاع بالاتری به شکل تعادل یافتهی خود میرسد و لذا محدودهی وسیعتری از ارتفاع امواج و عمقهای آب پای سازه را کنترل میکند.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
A NEW FORMULATION FOR KINETIC DYNAMIC RELAXATION METHOD BASED ON LAGRANGIAN INTERPOLATION
رابطهسازی نوین برای روش رهایی پویای جنبشی بر پایه ی درونیابی لاگرانژ
61
69
21842
10.24200/j30.2020.53836.2603
FA
مرتضی
عباسی
دانشکده ی مهندسی عمران، دانشگاه آزاد اسلامی، واحد مشهد
امیرحسین
نمدچی
دانشکده ی مهندسی عمران، مؤسسه آموزش عالی اقبال لاهوری
جواد
علامتیان
دانشکده ی مهندسی عمران، دانشگاه آزاد اسلامی، واحد مشهد
Journal Article
2019
09
01
In this paper, a new algorithm is presented for Dynamic Relaxation (DR) method <br />
with kinetic damping. In the kinetic dynamic relaxation algorithm, some successive points with maximum kinetic energy are traced in the course of numerical fictitious time integration. In the absence of damping forces, the points with maximum kinetic energy are close to the static equilibrium position of structure. This paper deals with a new formulation for kinetic DR method. For this purpose, Lagrangian interpolation functions were utilized to derive iterative Dynamic Relaxation equations. In the Lagrangian interpolation functions, new estimation of structural displacement vector was obtained based on previous estimations of displacement vector. Therefore, this procedure leads to adopting a trial and error method. On the other hand, this procedure leads to a new formulation that, unlike the ubiquitous DR methods, does not require the calculation of nodal velocities, thereby marching forward only through successive nodal displacement. Elimination the nodal velocities from Dynamic Relaxation process increases the simplicity of DR algorithm. Moreover, the requirement analysis memory is reduced using the suggested technique so that velocity vectors would not be stored in the program memory. Also, the power iteration method was used to determine the optimal time step ratio. By utilizing this time step, the restarting analysis phase, considered as one of the drawbacks of the common kinetic DR strategies, is eliminated. To evaluate the performance and efficiency of the proposed method, several truss and frame structures were analyzed. These structures had geometrically nonlinear behavior (Large Deflection). Results of these analyses were also compared with those of other conventional Dynamic Relaxation methods. Numerical results showed that the convergence rate of the proposed kinetic DR technique was higher than that of common DR algorithms. In other words, the number of the required DR iterations for convergence was reduced using the proposed DR algorithm in comparison with other DR schemes. Moreover, the analysis time of the proposed method was shorter than that of other common techniques.
در نوشتار حاضر، الگوریتم نوینی برای روش رهایی پویا با میرایی جنبشی ارائه شده است. برای انجام این کار، از درونیابی لاگرانژ برای تعیین رابطههای تکراری رهایی پویا استفاده شده است. بنابراین، رابطهسازی روش رهایی پویا، بدون نیاز به محاسبهی سرعتهای گرهیی و فقط بر اساس تغییرمکانهای گامهای پیاپی به دست میآید. همچنین، روش تکرارهای توانی برای تعیین کمیت نسبت گام زمانی بهینه به کار میرود. باید دانست، گام زمانی بهینه نیاز به بازآغازی تحلیل، که از دشواریهای اصلی روش رهایی پویای جنبشی است، را از بین میبرد. برای ارزیابی کارایی و عملکرد روش پیشنهادی از تحلیل غیرخطی چندین خرپا و قاب استفاده و نتایج با دیگر شیوههای متداول رهایی پویا مقایسه شدهاند. نتایج عددی نشان میدهند نرخ همگرایی روش رهایی پویای جنبشی پیشنهادی بیشتر از شیوههای متداول است.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
THE APPLICATION OF SPECIAL REINFORCEMENT TO IMPROVE POST-PUNCHING FAILURE
استفاده از آرماتورهای ویژه برای بهبود رفتار پس از گسیختگی پانچینگ دالهای تخت
71
80
21841
10.24200/j30.2020.54241.2622
FA
سعید
سروری
دانشکده ی مهندسی عمران، دانشگاه فردوسی مشهد
محمدرضا
اصفهانی
دانشکده ی مهندسی عمران، دانشگاه فردوسی مشهد
0000-0002-2655-2466
Journal Article
2019
09
15
Punching shear failure is usually the critical failure mechanism for flat slab <br />
reinforced concrete structures. The special brittleness of slab-column <br />
connections is due to the relative ease with which the flexural reinforcement <br />
in the top of the slab can be torn out of the concrete once an inclined failure <br />
surface has formed. If unpredictable loads are applied to the flat slab-column <br />
connections, punching shear failure occurs with almost no warning signs. <br />
According to the brittle manner of this failure, the load carried by the <br />
slab-column connection redistributes to adjacent supports and can cause <br />
overloading to these supports. It is necessary to provide a secondary load <br />
carrying mechanism after punching shear failure. In this Paper, Suggestions for <br />
establishing a supporting mechanism in the flat slab connections after punching <br />
shear failure are proposed. For this purpose, an experimental study was <br />
performed to investigate the post-punching behavior of 11 slab specimens with <br />
various reinforcement layouts. The effects of integrity, compressive, shear and <br />
bent-up reinforcements on the post-punching behavior of slab-column connections <br />
were studied. The results of the experiments show that Integrity reinforcements <br />
significantly increased the post-punching shear strength. These reinforcements <br />
can develop tensile membrane action and through alternative load paths to <br />
transfer the load. These reinforcements did not have much influence on the <br />
punching shear strength. In the \ column \ strip, compressive \ bars (except <br />
integrity reinforcements) \ did not \ have much \ influence on \ the \ punching and <br />
post-punching shear strength. The bent-up \ integrity \ reinforcements <br />
significantly \ increase \ punching \ and post-punching shear strength. The <br />
additional bent-up reinforcements increase punching shear strength but these <br />
reinforcements are not effective to the post punching phase and cannot increase <br />
the post \ punching \ shear strength. The shear reinforcements increase punching <br />
shear strength, but these reinforcements cannot increase post-punching shear <br />
strength. Furthermore, if the shear reinforcements are effectively extended, <br />
the behavior flat slabs will be more ductile.
چنانچه دال تخت، تحت بارهای غیرقابل پیشبینی قرار گیرد و گسیختگی پانچینگ دال تخت اتفاق بیفتد، پس از بازتوزیع نیروها، بارهای اتصال دال تخت به اتصالهای مجاور منتقل میشود و اتصالهای دیگر نیز دچار گسیختگی خواهند شد. جهت ایجاد برقراری یک سازوکار پشتیبان پس از گسیختگی پانچینگ در پژوهش حاضر، ۱۰ نمونه دال مربعی با مقیاس ۰٫۵ و با ابعاد ۱۶۰۰ میلیمتر و ضخامت ۱۲۵ میلیمتر با جزئیات متفاوت در آرماتورگذاری بر روی تکیهگاههای ساده آزمایش شدند، و سپس آثار آرماتورهای یکپارچگی، آرماتورهای فشاری، آرماتورهای یکپارچگی خم شده به بالا و آرماتورهای برشی در مقاومت پس پانچینگ بررسی شده است. نتایج آزمایشها نشانگر آن است که با افزودن آرماتور یکپارچگی، مقاومت پس پانچینگ افزایش مییابد.<br />
آرماتورهای فشاری مقاومتهای یاد شده را تغییر نمیدهند. خم کردن آرماتور یکپارچگی به سمت ناحیهی کششی دال، باعث افزایش مقاومت پانچینگ و پس پانچینگ اولیه خواهد شد. آرماتورهای برشی میتوانند مقاومت پانچینگ و شکلپذیری اتصال را افزایش میدهند.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
NONLINEAR BEHAVIOR OF REINFORCED CONCRETE WALLS WITH SHAPE MEMORY ALLOY REINFORCEMENT SUBJECTED TO EARTHQUAKE
بررسی رفتار غیر خطی دیوار بتن مسلح با آلیاژ حافظه دار شکلی در ترازهای مختلف تحت اثر زلزله
81
92
21846
10.24200/j30.2020.54222.2620
FA
حمید
بیرقی
دانشکدهی مهندسی عمران، دانشگاه آزاد اسلامی واحد مهدیشهر
Journal Article
2019
09
15
Shape Memory Alloys (SMAs) are new material in structural engineering. They can be used as reinforcement for the concrete walls. In this research, a numerical <br />
model was first developed based on an experimental test of a tall reinforced <br />
concrete wall with steel reinforcement subjected to an earthquake, and the <br />
numerical model responses were compared to the experimental model. Then, three other approaches were examined; first, the shape memory alloys were replaced only as vertical bars on the first story; in the second one, Shape memory alloy bars were replaced only on the first and sixth stories; and in the third <br />
approach, the whole vertical bars were replaced with shape memory alloy bars. <br />
Nonlinear time history analysis and comparison of model responses were <br />
performed. In addition, the parametric study of the responses was also done by <br />
changing some model characteristics such as axial force and earthquake <br />
intensity. In all three approaches with the shape memory alloy bars, the base <br />
moment demand value decreased by approximately 15\% compared to the model with steel reinforcement. In the moment demand diagram, the amount of moment demand at the mid-height of the structure is relatively increased compared to the base moment demand. This is due to the effect of higher modes on wall behavior. The moment diagram graph is not uniformly decreasing along the height is not like a straight line. In addition, parametric study of the responses is also performed <br />
by changing some model characteristics such as axial force and earthquake <br />
intensity. With the formation of a plastic hinge at the base of the wall,approximately, the amount of moment demand in this area remains constant and the effect of higher modes increases the moment demand at the mid-height of the structure and may result in the formation of another plastic hinge at the mid-height of the structure.
در پژوهش حاضر، ابتدا یک مدل عددی از آزمون دیوار بتن مسلح لاغر بلندمرتبه با میلگردهای فولادی که بر روی میز لرزان و اعمال شتابنگاشت زلزله صورت گرفته است، صحتسنجی شده است. سپس سه رویکرد دیگر بررسی شده است، که در رویکرد اول، آلیاژ حافظهدار شکلی فقط به عنوان میلگردهای قائم طبقهی اول و در رویکرد دوم، فقط در طبقههای اول و ششم جایگزین شدند و در رویکرد سوم، کل میلگردهای قائم دیوار با میلگردهایی از جنس آلیاژ حافظهدار شکلی جایگزین شدند. در هر سه رویکرد، مقدار لنگر تراز پایه حدود ۱۵\٪ کاهش در مقایسه با لنگر پایهی مدل اصلی نشان داده است. در دیاگرام پوش لنگر مدل اصلی، مقدار نیاز لنگر در اواسط ارتفاع سازه، بهطور نسبی افزایش یافته است. همچنین اثر مدهای بالاتر موجب افزایش نیاز لنگر در حدود اواسط ارتفاع سازه شده است و احتمال دارد به ایجاد مفصل خمیری دیگری در<br />
نواحی میانی ارتفاع سازه منجر شود.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
EXPERIMENTAL INVESTIGATION OF CONCRETE COUPLED WALL SYSTEMS WITH POST-TENSIONED STEEL COUPLING BEAM
ارزیابی آزمایشگاهی سیستم دیوار همبسته ی بتنی با تیر همبند فولادی پسکشیده
93
105
21840
10.24200/j30.2020.54221.2621
FA
محمدسجاد
زارعیان
دانشکده ی مهندسی عمران، دانشگاه فردوسی مشهد
محمدرضا
اصفهانی
دانشکده ی مهندسی عمران، د دانشگاه فردوسی مشهد
0000-0002-2655-2466
عبدالله
حسینی
دانشکده ی فنی و مهندسی عمران، دانشگاه تهران
Journal Article
2019
09
15
Post-tensioned coupled shear wall system is characterized by good seismic <br />
specifications like a self-centering capability and an ability to sustain large <br />
nonlinear lateral deformations with little damage and negligible residual <br />
deformation. In this system, the coupling beam is not embedded into the walls, <br />
and coupling of concrete walls is performed by posttensioning beam to the walls <br />
using unbonded post-tensioning (PT) steel strands. In this paper, the seismic <br />
behavior of hybrid coupled wall systems with post-tensioned steel coupling beam <br />
was investigated experimentally. In order to dissipate seismic energy and <br />
reduce displacements of system, two friction dampers were used in the <br />
beam-to-wall connection region. To study the behavior of the system, a friction <br />
damper was first tested at different frequencies; then, four 2/3-scale <br />
posttensioned hybrid coupled wall sub-assemblages equipped with friction <br />
dampers were tested subjected to reversed-cyclic lateral loading. Each <br />
sub-assemblage included a half-length steel coupling beam and the adjacent <br />
concrete wall region at a floor level. The test specimens consisted of one <br />
control specimen without friction damper and three specimens equipped with <br />
friction \ dampers with \ various damper \ normal \ forces and \ different \ initial beam post-tensioning (PT) \ steel stresses. The test results showed that the system had very good lateral stiffness, strength, and ductility with little damage up <br />
to 8\% lateral drift. The nonlinear deformation in this system occurs because of <br />
the gap opening at the beam-to-wall interface. The friction damper uses these <br />
gap opening displacements to provide supplemental energy dissipation. Friction <br />
dampers provide considerable energy dissipation at the system, while the <br />
self-centering capability of the system remains. The restoring effect of the <br />
post-tensioning steel strands causes closing the gap upon unloading and <br />
provides a self-centering behavior and flag-shaped hysteresis loops for <br />
specimens equipped with friction dampers. Based on the test results, the <br />
system, even after a severe earthquake, suffers limited damage and requires <br />
little repair.
سیستم دیوار برشی همبستهی پسکشیده، ویژگیهای لرزهیی مطلوبی، همچون: قابلیت مرکزگرایی و تحمل تغییرمکانهای غیرخطی بزرگ با خسارت محدود دارد. در پژوهش حاضر، رفتار سیستم دیوار همبستهی بتنی با تیر همبند فولادی پسکشیده بهصورت آزمایشگاهی ارزیابی شده است. بهمنظور استهلاک انرژی زلزله و کاهش تغییرمکانهای سیستم، از میراگرهای<br />
اصطکاکی در ناحیهی اتصال تیر به دیوار استفاده میشود. به این منظور، ابتدا یک میراگر اصطکاکی تحت بسامدهای مختلف بارگذاری آزمایش شد؛ سپس ۴ زیرسازه با مقیاس $\frac{2}{3}$ از سیستم دیوار همبستهی دوگانهی پسکشیده، تحت بار جانبی چرخهیی شبهاستاتیکی آزمایش شدند. نمونهها شامل یک نمونهیکنترلی فاقد میراگر و ۳ نمونهی مجهز به میراگرهای اصطکاکی با سطوح مختلف کشش اولیهی کابلها و مقادیر مختلف پیشتنیدگی میراگرها بودند. نتایج آزمایشها نشان داد که سیستم سختی جانبی، مقاومت و شکلپذیری عالی و خسارت ناچیز تا جابهجایی نسبی ۸\٪ دارد و میراگرهای اصطکاکی میتوانند ظرفیت استهلاک انرژی قابل توجهی را در سیستم ایجاد کنند، در حالی که قابلیت مرکزگرایی سیستم محفوظ میماند.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
EXPERIMENTAL STUDY OF MECHANICAL SPLICES OF TENSILE REINFORCED CONCRETE BEAMS UNDER BENDING
بررسی آزمایشگاهی وصله ی مکانیکی میلگردهای کششی تیر بتن آرمه تحت خمش
107
117
21845
10.24200/j30.2020.54320.2630
FA
علی
خیرالدین
دانشکده ی مهندسی عمران، دانشگاه سمنان
0000-0001-7802-2013
پیام
طریقی
دانشکده ی مهندسی عمران، دانشگاه سمنان
قاسم
پاچیده
دانشکده ی مهندسی عمران، دانشگاه صنعتی شریف
صادق
هاشمی
دانشکده ی مهندسی عمران، دانشگاه سمنان
Journal Article
2019
09
17
In order to investigate into the performance of mechanical splices, 6 RC beams <br />
with the same dimensions and materials whose only difference is type and <br />
location of splicing, have been tested. This study aims to assess the effect of <br />
spacing between the splices with respect to their type. Indeed, the results of <br />
this paper are intended to provide a proper understanding from location of <br />
splices and its effect on the performance of the reinforced concrete (RC) beams. The results indicated that splices do not cause remarkable change in load-carrying capacity of the specimens. In addition, after applying loads and fracture of specimens, none of the mechanically-spliced rebars was ruptured at the location of splice and coupler remained undamaged. Further, it was observed that the reference beam and mechanically spliced beam (tension rebar in the mid-span and 2 other tension rebars with spacing of 60cm from mid-span and symmetrically distributed along the beam) exhibited minimum effective moment of inertia and thus, the same trend regarding flexural rigidity that is in direct relation to the moment of inertia, was attained. Accordingly, the reference beam and specimen L100 offered minimum displacement ductility. Specimen L33 and M33-60 exhibited 6\% increase and 10\% decrease in their strength respectively, experiencing maximum and minimum load-carrying capacity.
به منظور بررسی عملکرد وصلههای مکانیکی در پژوهش حاضر، ۶ نمونه تیر بتنآرمه با ابعاد و مصالح یکسان، که فقط در نوع وصله و محل آ نها با یکدیگر تفاوت داشتند، ساخته شده است. هدف از پژوهش حاضر، بررسی تأثیر فاصلهی بین وصلهها با توجه به نوع آنها و همچنین مقایسهی آن با تیر بدون وصله بوده است. همچنین بدین وسیله دید مناسبی از محل قرار گرفتن وصلهها و تأثیر آنها در عملکرد تیر بتنآرمه برای طراحان و مجریان سازههای بتنآرمه فراهم شده است. نتایج حاصل از پژوهش حاضر نشان داد که با به کار بردن وصلهها، تغییر محسوسی در میزان باربری نمونهها نسبت به حالت تیر مرجع مشاهده نشده است. همچنین پس از اعمال بارگذاری و شکستن نمونهها، هیچیک از میلگردهای با وصلهی مکانیکی در محل وصله گسیخته نشده و کوپلرها سالم باقی ماندهاند. تیر مرجع بیشترین و تیر وصله شده به روش کوپلر (آرماتور کششی میانی در مرکز تیر و ۲ آرماتور کششی دیگر به فاصلهی ۶۰ سانتیمتر<br />
از مرکز تیر و به صورت متقارن وصله شدهاند)، کمترین میزان ممان اینرسی مؤثر را داشتهاند؛ بنابراین همین مقایسه در مورد پارامتر سختی خمشی هر یک از نمونهها، که نسبت مستقیم با پارامتر ممان اینرسی مؤثر دارد، صادق بوده است. همچنین تیر مرجع، بیشترین و تیر ۱۰۰L،<br />
کمترین شکلپذیری جابهجایی را داشته است. نمونهی ۳۳L با ۶\٪ افزایش و نمونهی ۶۰ـ۳۳M با ۱۰\٪ کاهش مقاومت نسبت به تیر مرجع، به ترتیب بیشترین و کمترین میزان باربری را داشتهاند.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
INVESTIGATING EFFECTS OF STRESS-DEPENDENT MATERIAL DAMPING ON THE NONLINEAR SEISMIC RESPONSE OF A TYPICAL CONCRETE GRAVITY DAM
بررسی اثر میرایی وابسته به اندازه ی تنش در تحلیل لرزه یی غیرخطی سدهای بتنی وزنی
119
130
21849
10.24200/j30.2020.54299.2629
FA
امیر
سوری
دانشکده ی مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
حسن
میرزا بزرگ
دانشکده ی مهندسی عمران - دانشگاه صنعتی خواجه نصیر الدین طوسی
0000-0003-0029-8137
Journal Article
2019
11
09
Generally, Rayleigh damping assumes a specified damping ratio for the structure <br />
in the dynamic analysis. Although this assumption is accepted in analysis and <br />
design of structures, there is some distance from the experimental results <br />
showing that the damping ratio depends on the stress amplitude. In this paper, <br />
the damping ratio for each element is a function of its principal stress and <br />
its value is determined utilizing a proposed algorithm called Element Developed <br />
Energy Dissipation Algorithm (EDEDA). The proposed algorithm was implemented into a code based on finite element, which is able to simulate nonlinear behavior of mass concrete utilizing the smeared crack approach. In this regard, due to stress redistribution in the nonlinear time history analysis, we have a <br />
new concept, namely damping ratio redistribution such that when the stress <br />
value of each element changes, the relevant damping value is updated. Based on <br />
an analysis of a typical concrete gravity dam (Pine Flat dam), two usual methods in the Rayleigh damping approach which include stiffness proportional damping and mass/stiffness proportional damping are considered rigorously. In addition, the brittle damping approach was utilized in the proposed algorithm, where the damping contribution of a cracked element was eliminated from the computing procedure. It was found that when the damping redistribution was taken into account, the damping ratio in each element would be updated at each time step corresponding to the principal stress. This algorithm would produce more real results about the considered gravity dam so that in the low-level seismic excitation, the response of the structure was less than that in the traditional method and raising the excitation level led to higher damping affecting the crest displacement. In addition, the stiffness proportional damping leads to crack profiles in the neck region of the dam body showing more correspondence than the results obtained from the models with mass/stiffness proportional damping.
در روش رایلی، یک ضریب ثابت برای میرایی در طول تحلیل دینامیکی فرض میشود. مطالعات آزمایشگاهی نشان میدهند که مقدار میرایی در سازه، تابعی از سطح تنش است. در نوشتار حاضر، ضریب میرایی برای هر المان به تنش اصلی آن وابسته بوده و بر اساس الگوریتم پیشنهادی EDEDA، «الگوریتم توسعهیافتهی انرژی تلف شدهی المان» محاسبه شده است. برای آنالیز و کاربرد الگوریتم پیشنهادی از روش اجزاء محدود استفاده و برای مدلسازی رفتار غیرخطی بتن حجیم، روش ترک اندود، به کار گرفته شده است. به دلیل بازتوزیع تنش المانها در طول تحلیل و وابستگی ضریب میرایی به سطح تنش، یک مفهوم جدید به نام بازتوزیع میرایی در نوشتار حاضر معرفی شده است. تحلیل سد بتنی وزنی پاین فلت (Pine Flat)نشان میدهد که الگوریتم پیشنهادی قادر است رفتار خطی و غیرخطی بدنهی سد را به خوبی مدلسازی کند و نتایج قابل اعتمادتر و منطقی ارائه دهد.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
EVALUATION OF HEAT TRANSFER AND RATE OF STRENGTH GAIN OF CONCRETE
ارزیابی انتقال حرارت و روند کسب مقاومت در بتن
131
139
21844
10.24200/j30.2020.54432.2639
FA
محمد علی
داستان دیزناب
دانشکده ی فنی و مهندسی، دانشگاه اراک
سیدمهدی
موسوی
دانشکده ی فنی و مهندسی، دانشگاه اراک
محمد
کریمی مهرآبادی
دانشکده ی فنی و مهندسی، دانشگاه اراک
محسن
آخانی
دانشکده ی فنی و مهندسی، دانشگاه اراک
Journal Article
2019
11
11
Stress gain of concrete is a heated procedure. The amount of heat significantly <br />
depends on cement type, cement content, and cement-water ratio. While the rate <br />
of generated heat is far more than that of heat transfer to the exterior part of concrete mass, temperature of the interior part of concrete element during that procedure increases. Furthermore, the strength gain of concrete is a function of temperature history of every part of element which is influenced by heat caused by hydration. If the stress generated by heat in fresh concrete is greater than acquired strength of concrete, then early cracks will form in the concrete mass. As a result, thermal analysis and checking the strength gain in massive concrete structures like concrete dams, foundations, and bridge decks would be especially important. The terms heat transfer and thermal analysis are composed of some mechanisms. This models the mechanism and simulates the strength gain of concrete by finite element method. After verifying the finite element model, we will study the strength gain of a concrete slab and a reinforced concrete beam. All the experiments are in accordance with ASTM standard to determine the parameters of cement heating procedure. Controlled environment with a constant temperature is used for curing concrete specimens. Six different ages (first age for about 4 MPa compressive strength and next ages are twice the previous age. The specimens are studied at three different temperatures, $15^{\circ}C$,$25^{\circ}C$ and $35^{\circ}C$, 54 specimens are considered. The results show that this numerical method can estimate heat transfer in the concrete body with acceptable accuracy. In addition, the results exhibit that the proposed time for removal of forms in the ninth part of national building regulation of Iran ``design and <br />
construction of concrete structures'' should be considered in greater detail.
فرایند گیرش بتن، یک فرایند گرماده است. در صورتی که تنشهای حرارتی در بتن تازه از مقاومت اکتسابی بتن در طول دورهی کسب مقاومت بیشتر باشند، آنگاه ترکهای زودهنگام در تودهی بتن به وجود خواهند آمد. در نتیجه، تحلیل حرارتی و بررسی روند کسب مقاومت بهخصوص در سازههایی با بتنریزی حجیم (مانند: سدها، فونداسیونها و عرشهی پلها)، اهمیت ویژهیی دارد. مقولهی انتقال حرارت و تحلیل دمایی بتن تازه، متشکل از چند مکانیزم<br />
است. در نوشتار حاضر، به مدلسازی مکانیزمهای اشاره شده و شبیهسازی روند کسب مقاومت بتن با استفاده از روش اجزاء محدود و انجام آزمایشهای مرتبط پرداخته شده است. پس از صحتسنجی مدل اجزاء محدود، روند کسب مقاومت یک سیستم دال و تیر بتنآرمه بررسی شده است. نتایج مطالعهی حاضر نشان میدهد که روش اشاره شده، مقاومت بتن را بهصورت مطلوبی<br />
ارزیابی میکند، ولی زمانهای پیشنهاد شده در مبحث نهم مقررات ملی ساختمان باید با آزمایشهای بیشتری ارزیابی شود.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
THE ASSESSMENT OF SPACING AND SOIL SOLIDITY INFLUENCE IN MULTIPLE STRUCTURE-SOIL-\\STRUCTURE INTERACTIONS IN HIGH-RISE BUILDINGS
بررسی تأثیر فاصله ی ساختمانها و سختی خاک در اندرکنش چندگانه سازه - خاک - سازه در ساختمانهای بلند
141
152
21847
10.24200/j30.2020.54799.2674
FA
امیرحسین
نوروزی
دانشکده ی مهندسی عمران، دانشگاه سمنان
محسن
گرامی
دانشکده ی مهندسی عمران، دانشگاه سمنان
رضا
وهدانی
دانشکده ی مهندسی عمران، دانشگاه سمنان
عباس
سیوندی پور
دانشکده ی مهندسی عمران و نقشه برداری، دانشگاه تحصیلات تکمیلی صنعتی و فناوری پیشرفته، کرمان
Journal Article
2019
12
09
Simultaneous effects of soil and several structures are known as the site-city <br />
interaction (structure-soil-structure interaction), which is very important in <br />
areas with high construction density and has been considered by many scholars <br />
over the past two decades. Site-city interaction can affect the structure behavior due to the wave propagation between structures. In fact, it decreases the structure responses in some cases, while it increases the responses in some other cases. Many parameters play a role in assessing site-city interaction such as the gender of soil, number and arrangement of structures, height of buildings, shape of earthquake waves, and the main period of structures and soil. The present study aimed to evaluate the effects of gender and solidity of the soil based on 2800 standards and building distances in site-city interaction in three dimensions. The effects of these parameters on the foundation and top of structure responses including maximum acceleration values and Root Mean Square acceleration were assessed. SASSI 2000 software was employed to model structures and soil and analyze the system. In this study, structural models were considered in both single structure and the ideal city (structural groups). The groups were $3\times 3$ <br />
including nine identical structures. In the single model, the site-city interaction was not considered, and these effects were considered in the group model. Lumped-Mass Stick Model was used to model each structure and the soil, which was modeled in the software including a semi-infinite elastic environment with horizontal layering, located on the viscoelastic half-infinitely semi-space. Based on the results, regarding the top of structure, the existence of structures alongside each other by considering site-city interaction effects in different soils resulted in decreasing the structural acceleration responses (25\% average) compared to the individual structure site-city interaction effects, which increased by decreasing the soil stiffness (5-10\% average). Further, the effects of multiple structure-soil-structure interaction decreased (10-15\% average) by increasing the distance between structures.
آثار همزمان خاک و چندین سازه، به عنوان اندرکنش شهر - ساختگاه (سازه - خاک - سازه) شناخته میشود، که در مناطق با تراکم ساختمانی زیاد، بسیار مهم است. به دلیل انتشار امواج بین سازهها، لحاظ اثر اندرکنش شهر - ساختگاه باعث تغییر در پاسخها میشود. در بررسی موضوع اخیر، پارامترهای زیادی، از جمله: جنس خاک، میزان تراکم و نظم ساختاری شهری، ارتفاع ساختمانها، شکل امواج زلزله و دورهی تناوب اصلی سازهها و خاک تأثیر دارند. در پژوهش حاضر، آثار نوع خاک (تیپبندی استاندارد ۲۸۰۰) و فواصل ساختمانها بر روی این موضوع در پاسخهای بالای سازه و فونداسیون به صورت سهبُعدی بررسی شده است. با توجه به نتایج به دست آمده میتوان این نکته را بیان کرد که وجود سازهها در کنار یکدیگر با لحاظ اثر اندرکنش شهر - ساختگاه در خاکهای مختلف موجب کاهش پاسخهای شتاب سازه )میانگین ۲۵\٪( نسبت به حالت سازهی منفرد میشود.
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
4.1
2021
02
19
A DATA MINING APPROACH TO THE IRANIAN LORRY DRIVERS WITH VARIOUS CHARACTERISTIC DRIVER BEHAVIORS, VEHICLES, AND TRAVEL
دادهکاوی تخلفات رانندگان ناوگان باری ایران تحت شرایط مختلف رفتار راننده، ناوگان و سفر
153
161
21843
10.24200/j30.2020.54516.2649
FA
عبدالرضا
شیخ الاسلامی
دانشکده ی مهندسی عمران دانشگاه علم و صنعت ایران
https://orcid.org/00
احسان
ایازی
دانشکده ی مهندسی عمران، دانشگاه علم و صنعت ایران
علی
مقدری
دانشکده ی مهندسی عمران ، دانشگاه علم و صنعت ایران
Journal Article
2019
10
06
Transportation and logistics play an important role in the economy of countries, while road transport is one of the most important modes of transportation for load transportation, especially in developing countries. Accidents are directly related to driving offenses, and drivers who commit more offenses are more prone to accidents. Therefore, reducing driving offenses can reduce accidents. Hence, the recognition of common driving offenses among heavy vehicle (truck) drivers and the effective factors in directing them to reduce driving offenses can consequently reduce the frequency and severity of accidents. Thus, there is a necessity for conducting further studies to carry out research in this regard more than ever before. The main objective of this study is to identify and evaluate important factors affecting lorry drivers committing traffic offenses. To this end, the required information was divided into six categories: traffic tonnage, not wearing a seatbelt, unauthorized speed, impaired driving, talking on the phone, lacking a scalp leaf, and these factors are known as dependent variables. Also, the influencing factors in the group of driver characteristics, vehicle, and mileage were considered by using <br />
<br>a demographic questionnaire and Driving Behavior Questionnaire (DBQ) and <br />
<br>interviews with 420 drivers over 60 days at the Shahid Kheibari Terminal in <br />
<br>Mashhad. After correcting or removing incomplete questionnaires, the information of 351 drivers was used for statistical analysis. Besides, statistical analysis of data using the multivariate logistic regression model showed that drivers with discharging and loading of five or six times per month are less likely to commit excess tonnage than drivers with discharging and loading of more than 12 times per month. The results also proved that drivers with less slip behavior and not so-called distraction would be less likely to commit unauthorized speed offenses and 85.4\% less likely to commit this violation. Finally, analysis of statistical analysis showed that drivers with aggressive driving behavior were more likely to commit lacking a scalp leaf offense.
هدف اصلی مطالعهی حاضر، شناسایی و بررسی اثرگذاری عوامل مهم و تأثیرگذار در ارتکاب رانندگان ناوگان باری به تخلفهای رانندگی است. برای دستیابی به اهداف مورد نظر، اطلاعات مورد نیاز شامل نوع تخلف رانندگی در ۶ طبقهبندی و با استفاده از تکمیل پرسشنامهی اطلاعات دموگرافیک و رفتار رانندگی رانندگان )DBQ( در یک بازهی ۶۰ روزه، از طریق انجام مصاحبه برداشت و برای انجام تحلیلهای آماری استفاده شدهاند. در ادامه، تحلیل آماری اطلاعات برداشت شده نشان داد رانندگانی که در هر ماه، ۵ یا ۶ نوبت تخلیه و بارگیری میکنند، نسبت به رانندگانی که در هر ماه بیش از ۱۲ نوبت تخلیه و بارگیری میکنند، کمتر مرتکب تخلف اضافه تُناژ میشوند. همچنین، رانندگانی که دچار رفتار لغزشی کمتری هستند و به اصطلاح حواسپرت نیستند، به میزان کمتری مرتکب تخلف سرعت غیرمجاز میشوند و احتمال ارتکاب به تخلف سرعت غیرمجازشان به میزان ۸۵٫۴\٪ کاهش مییابد.