دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
ANALYZING DYNAMICS OF IRAN'S PUBLIC CONSTRUCTION PROJECTS DELIVERED UNDER DESIGN-BID-BUILD METHOD
تحلیل دینامیکی ساختار اجرای پروژههای عمرانی عمومی تحویل شده به روش طراحی - مناقصه - ساخت در کشور
3
10
21159
10.24200/j30.2018.2129.2100
FA
امین
الوانچی
دانشکده ی مهندسی عمران، دانشگاه صنعتی شریف
Journal Article
2017
07
05
Currently, many public construction projects in Iran are facing time delays, cost overruns, and poor quality. Many research efforts have been conducted to identify the root-causes of the problems these projects are facing. Most of these research efforts, though, have adopted survey and interview-based methods to investigate the contributing factors. Financial resource shortage, project management weakness, and contractual disputes are among the commonly identified contributing factors. In a systemic view of the root causes of problems in public construction projects, projects organization and related regulations can be responsible for the main parts of the root causes. Meanwhile, uniform or standard-form contracts set by Iran's government have major contributions to the structure of the public construction projects organization. Uniform contracts, developed by dedicated groups of experts, save project owners' time and prevent many possible critical issues from the complexity involved in public construction projects. However, in-advance development of the uniform contracts poses the risk that any possible shortfall in the uniform contracts can get populated among all public projects implemented across the country. To address this issue in this research a conceptual system dynamics-based analysis approach was adopted. This approach was used to analyze the complex dynamic interactions of different stakeholders formed as results of the pre-determined instructions of uniform contracts in the public construction projects. The main focus of this research is on the dynamics of the public construction projects implemented under the design-bid-build project delivery method. Two uniform contracts commonly used for the implementation of the design-bid-build projects in the country, including consulting services and construction services, were investigated. Main causal loops formed as results of current settings of these uniform contracts were extracted and analyzed. As a result of this analysis, assigned roles in these uniform contracts to the public project owners and project designers were challenged and adjustments to the assigned roles were recommended.
طی سالیان اخیر اجرای بسیاری از پروژههای عمرانی عمومی در کشور با تأخیرات زیاد، کیفیت پایین، اختلافات قراردادی و درنتیجه افزایش هزینهها همراه بوده است. از نگاه سیستمی، بسیاری از این مشکلات ریشه در سازوکارهای پیچیدهی ناشی از روابط علت و معلولی بین ارکان<br />
مختلف پروژه و تحت تأثیر قوانین و مقررات حاکم بر اجرای این پروژهها، به خصوص قراردادهای همسان تهیه شده توسط سازمان مدیریت و برنامهریزی کشور، دارد. در این پژوهش تحلیلی مفهومی از دینامیک سازوکارهای اجرایی تحت تأثیر دو قرارداد همسان مورد استفاده در روش تحویل طراحی ـ مناقصه ـ ساخت، شامل قرارداد همسان خدمات مشاوره و قرارداد همسان<br />
پیمانکار ساخت، صورت گرفته و نشان داده شده که روابط تعریف شده در این قراردادها میتواند منشاء بسیاری از مشکلات موجود در روند اجرای پروژههای عمرانی عمومی کشور باشد؛ همچنین اصلاح ساختار اجرایی در نظر گرفته شده برای پروژههای عمومی در این قراردادها میتواند<br />
به مرور زمان به رفع بسیاری از این مشکلات بینجامد.
https://sjce.journals.sharif.edu/article_21159_8f89ef5af72a5cffdeb2759d409f9766.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
COMPARISON OF THE PERFORMANCE OF MACRO-POLYMERIC FIBERS AND STEEL FIBERS IN CONTROLLING DRYING SHRINKAGE CRACKS OF CONCRETE
مقایسه ی عملکرد الیاف پلیمری ماکرو و الیاف فولادی به لحاظ کنترل ترک خوردگی ناشی از جمع شدگی خشک شدن بتن
11
19
21165
10.24200/j30.2018.5210.2221
FA
علیرضا
باقری
دانشکده ی مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
مرتضی
گرگانی فیروزجاه
دانشکده ی مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
آرمین
جمالی
دانشکده ی مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
حامد
زنگانه
دانشکده ی مهندسی عمران ، دانشگاه صنعتی خواجه نصیرالدین طوسی
Journal Article
2017
10
10
This study investigates the effect of polymeric and steel fibers in controlling <br />
drying shrinkage cracking of concreteby the restrained ring test according to <br />
ASTM C1581 and determines the cracking potential of various mixes. In addition <br />
the effect of various fibers on physical and mechanical properties of concrete <br />
such as a compressive and tensile strength and free shrinkage was investigated. <br />
Fibers used include macro polymeric fiber of single-strand type, spun <br />
multi-strand type and a hooked end steel fiber, which were used at dosages of <br />
0.25, 0.5 and 1 \%. Furthermore a micro polymeric fiber at dosage of <br />
0.25\% was investigated. The results showed that the use of steel fibers up to 1\% and macro polymeric fibers up to 0.5\% have no appreciable effect on compressive <br />
strength. With regards to tensile strength, the effect of fibers up to 0.5\% was similar to that described for compressive strength. However, at the dosage of 1\%, the use of steel fibers increased the tensile strength while macro polymeric fiber slightly decreased this parameter. Free shrinkage test results indicate that the effect of fibers on free shrinkage was negligible. The effect of micro and macro polymeric fibers at the dosage of 0.25\% in decreasing the cracking potential of concrete is low, and cracking potentials are classified as ``High''. At this dosage, steel fiber showed a slightly better performance and the cracking potential was ``Moderate to High''. By increasing the dosage of fibers to 1\%, the cracking potential for macro polymeric fibers and steel fibers were determined as ``Moderate to Low'' and ``Low'' respectively. Crack width measurements showed that macro polymeric fiber and steel fiber at a dosage of 0.25\% decreased crack widths by about 35\% relative to the control mix. At fiber contents of 1\%, the maximum crack opening for the macro polymeric fibers showed a decrease of about 60\% compared to the control mix. The steel fiber showed the best performance at this dosage and was able to completely prevent shrinkage cracking.
در این مطالعه تأثیر الیاف پلیمری ماکرو در کنترل ترکخوردگی جمعشدگی ناشی از خشک شدن نظیر زمان وقوع اولین ترک، نرخ توسعهی تنشهای کششی و عرض ترکها با استفاده از آزمایش حلقهی مقید مورد بررسی قرار گرفته است. همچنین اثر الیاف پلیمری ماکرو بر روی برخی از<br />
ویژگیهای مکانیکی و فیزیکی بتن نظیر مقاومت فشاری، مقاومت کششی و جمع شدگی آزاد بتن مورد بررسی قرار گرفت. برای مقایسه، مخلوطهای حاوی الیاف پلیمری ماکرو و الیاف فولادی نیز ساخته و بررسی شدند. نتایج نشانگر عملکرد مشابه الیاف پلیمری ماکرو و الیاف فولادی در مقادیر استفاده کم و متوسط )۰٫۲۵ و ۰٫۵ درصد مصرف( هستند. در ۰٫۵ درصد مصرف الیاف توانستهاند عرض ترکها را تا حدود ۵۰ درصد کاهش دهند. با افزایش مقدار مصرف به ۱ درصد، عملکرد الیاف فولادی در کنترل ترکخوردگی جمعشدگی به میزان قابل توجهی بهتر از الیاف پلیمری ماکرو بوده است.
https://sjce.journals.sharif.edu/article_21165_436b37f953141ec52673e5865cc5a2ed.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
EFFECTIVE PARAMETERS A SEISMIC PERFORMANCE OF SKEWED BRIDGES USING A SIMPLIFIED MODEL
پارامترهای تأثیرگذار در رفتار لرزه یی پل های مورب با استفاده از مدل دینامیکی ساده شده
21
32
21160
10.24200/j30.2018.5373.2242
FA
مهدی
اسدپور
گروه عمران، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
افشین
کلانتری
پژوهشگاه بین المللی زلزله شناسی و مهندسی زلزله، تهران، ایران
Journal Article
2017
11
28
This study investigates the behavior of skewed bridges based on the vulnerabilities that these structures demonstrate while seismic excitation is of great importance. Identifying the parameters affecting seismic vulnerability enables the designer of a skewed bridge to consider a proper understanding of various aspects of selecting the geometry and distribution of stiffening factors in a skewed bridge in the design process. Based on the geometric conditions, skewed bridges are coupled with mode shapes and significant rotation around the vertical axis is observed in certain conditions in earthquakes. In order to investigate and <br />
acquire the parameters affecting the domination of rotation modes in these <br />
structures, the present study employed a 3D model with three degrees of freedom <br />
whose accuracy had already been confirmed. Results of the numerical <br />
calculations revealed that effective parameters in the domination of rotation <br />
mode include the ratio of transverse stiffness to longitudinal stiffness of the <br />
columns, the ratio of length of the deck to its width, the ratio of the entire bridge mass to the mass of the pavement, the ratio of torsional stiffness of each column to the multiplication of longitudinal stiffness of the bridge by squared width of the bridge deck, the ratio of columns' eccentricity from the center of the mass to the width of the deck and skewedness. For further numerical calculations, a finite element model of the Foothill Boulevard Skewed Bridge was created, and a time history analysis was conductedon it. The results of the analyses of this finite element model were investigated and generalized to other skewed bridges.
درک رفتار پلهای مورب و پارامترهای مؤثر در مبنای آسیبپذیری آنها در حین تحریکهای لرزهیی، اهمیت بسیار دارد. شناسایی پارامترهای تأثیرگذار در آسیبپذیری لرزهیی باعث خواهد شد تا طراح پل مورب بتواند در حین طراحی از جنبههای مختلف، شناخت صحیحی از انتخاب هندسه و توزیع عوامل ایجاد سختی در پل مورب داشته باشد. در پلهای مورب با توجه به شرایط هندسی، برخی از مودهای ارتعاشی درگیر (Cupled) بوده و در شرایطی، دوران قابل توجه عرشه حول محور قائم در حین وقوع زمین لرزه مشاهده شده است. برای بررسی و به دست آوردن پارامترهای تأثیرگذار در غلبهی مودهای دورانی در پلهای مورب، در پژوهش حاضر از یک مدل سهبعدی سه درجه آزادی، که پیش از این ارائه و صحتسنجی شده، استفاده شده است. نتایج<br />
محاسبات عددی نشان میدهد پارامترهای تأثیرگذار در غالب شدن مود دورانی عبارتاند از: نسبت سختی عرضی به سختی طولی ستونها، نسبت طول به عرض عرشه، نسبت جرم کل پل به جرم روسازه، نسبت سختی پیچشی هر ستون به حاصلضرب مقدار سختی طولی آن ستون در مجذور عرض عرشهی پل، نسبت برونمحوری ستونها از مرکز جرم به عرض عرشه، و زاویهی تورب. در ادامهی بررسیها، یک مدل اجزاء محدود از پل بلوار فوتهیل ایجاد شده و مهمترین پارامتر تأثیرگذار در رفتار لرزهیی پلهای مورد نظر، که زاویهی تورب است، بررسی شده است. نتایج به دست آمده نشان میدهند با افزایش زاویهی تورب، دوران عرشه حول محور قائم بر مرکز جرم عرشه افزایش مییابد.
https://sjce.journals.sharif.edu/article_21160_49dfe6529f1cf0183c58ddb51b3111ff.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
TRANSPORTATION NETWORK DESIGN BASED ON NETWORK FLEXIBILITY AND REGRET THEORY
طراحی شبکه ی حملونقل بر اساس معیار انعطافپذیری شبکه و تئوری حسرت
33
44
21161
10.24200/j30.2018.5670.2259
FA
محمد مهدی
برزگر گنجی
دانشکده فنی مهندسی، دانشگاه بینالمللی امام خمینی (ره)
امیرعباس
رصافی
دانشکده فنی مهندسی، دانشگاه بین المللی امام خمینی (ره)
0000-0002-3419-0194
Journal Article
2017
11
29
Transportation networks are essential infrastructures of the present societies <br />
and are progressively growing in importance. Therefore, the network should <br />
develop in accordance with the society's needs. Transportation network <br />
expansion is a costly process and often is not returnable. Usually, there are <br />
not enough resources to satisfy the hole future demand; therefore, available <br />
resources must be utilized in an efficient manner. It has been shown that <br />
classic transportation planning approach and decision theory should be revised <br />
and a more flexible planning approach must be taken to deal with the uncertainties and the internal or external changes. The concept of flexibility has been used in many scientific disciplines including transportation planning. Most of the studies of network flexibility have focused on the concept of capacity flexibility. Network flexibility can be considered as an effective factor in network reliability. A network should be flexible enough to be considered as a reliable one. In this study, a model of transportation network design has been developed based on increasing the flexibility, especially increasing the survivability of the network facing daily variations including daily crashes or rush-hour blockings. Network survivability is the ratio of the demand that will be answered after the occurrence of a failure in a network. Improving the properties of a network will affect the flow pattern all around the network. In most studies, utility theory has been used to model user answer to realize the model to a greater degree. It has been shown that utility theory faces basic shortcomings and regret theory has been introduced as an <br />
alternative way to handle the users' behavior. In this study, a stochastic user <br />
equilibrium has been developed based on regret theory to model the user reply <br />
to the network expansion. Results show that the network improves based on the <br />
survivability model, which has better performance when a link is blocked.
شبکههای حملونقل، یک زیرساخت اساسی و پرهزینه در جوامع امروزی است، که باید به شکل بهینه استفاده شوند. بدین منظور برای رویارویی با عدم قطعیتها و انواع تغییرات سیستم، لازم است رویکردی با انعطافپذیری بیشتر اتخاذ شود. در مطالعهی حاضر، مدل طراحی شبکه بر مبنای افزایش انعطافپذیری و با تمرکز بر افزایش قابلیت بقا(نسبتی از تقاضا که پس از شکست یک یا چند کمانگره همچنان پاسخ داده میشود)، در مقابل تغییرات روزانه توسعه یافته است. پاسخ کاربران به هرگونه تغییر در شبکه و پیشبینی الگوی ترافیکی بر اساس یک مدل رفتاری مناسب، بخش اساسی مسئلهی طراحی شبکه است. با توجه به محدودیتهای تئوری مطلوبیت، تئوری حسرت به عنوان جایگزین معرفی شده و برای مدلسازی پاسخ کاربران به بهبود شبکه، یک مدل تعادل احتمالی کاربر با استفاده مفهوم حسرت توسعه یافته است. نتایج به دست آمده نشانمیدهد که شبکهی بهبود یافته با مدل طراحی شبکه بر مبنای قابلیت بقا، در صورت انسداد هر یک از کمانها، عملکرد بهتری نسبت به شبکهی بهبود یافته با سایر مدلها به نمایش میگذارد.
https://sjce.journals.sharif.edu/article_21161_a75a505c1e730f2e35ae24f51c9d7047.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
EXPERIMENTAL INVESTIGATION OF RING FOOTING BASED ON REINFORCED SOIL WITH GRANULATED RUBBER AND GEOGRID UNDER REPEATED LOADING
بررسی آزمایشگاهی رفتار پیِ رینگی مستقر بر خاک مسلح شده با خردهلاستیک دانهیی و ژئوگرید تحت بار تکراری
45
55
21168
10.24200/j30.2018.50302.2296
FA
محمدحسین
کیقبادی
دانشکده ی فنی - مهندسی، دانشگاه هرمزگان
عادل
عساکره
دانشکده ی فنی - مهندسی، دانشگاه هرمزگان
0000-0003-4706-2957
بهزاد
کلانتری
دانشکده ی فنی - مهندسی، دانشگاه هرمزگان
مسعود
دهقانی
دانشکده ی فنی - مهندسی، دانشگاه هرمزگان
Journal Article
2018
01
28
In present study, the behavior of ring footing subjected to repeated loading has been investigated by several experimental tests. These tests have been done <br />
by ring footing with outer diameter of 300 mm and optimum inner to outer <br />
diameter ratio of 0.4 based on unreinforced bed, rubber-reinforced bed, geogrid <br />
reinforced bed and geogrid-rubber reinforced bed. Three levels of repeated <br />
loading (240, 560 and 840 kPa) have been applied. The results showed that the <br />
residual plastic settlement is reduced about 48\% and 17.9\% for the reinforced <br />
bases with rubber particles and with geogrid layer, respectively, compared to <br />
the unreinforced bed, but this reduction is about 63.5\% for reinforced base <br />
with combination of rubber particles and geogrid layer. Also simultaneous use <br />
of rubber particles and geogrid reinforcement can be more effective in increasing the portion of resilient settlements compared to using each of them alone. The resilient settlement ratio increased from 5.95\% in unreinforced soil up to 24.2\% in geogrid-rubber reinforced beds. In fact using reinforcements in soil bed can decrease the plastic deformations of footing bed during few numbers of loading cycles. This behavior is a result of shakedown phenomenon which could lead to steady-state condition and the system behave more resilient in reinforced beds compared to unreinforced bed. Also the results of tests indicated that in both rubber-reinforced bed (without any geogrid layer) and geogrid-rubber reinforced bed, the optimum value of the thickness of rubber-soil mixture layer to improve the behavior of ring footing, is equal to 0.5 times the outer diameter of ring footing. The enhancement of the thickness of rubber-reinforced layer beyond its optimum value can lead to negative effects (increase in plastic settlement or decrease in the portion of resilient settlement) due to increase in compressibility of the bed. Although the adding of geogrid layer could activate the positive reinforcing effects of deeper layers of rubber-soil mixture; but these positive effects are not big enough to withstand the negative effects of using a thick layer of rubber-soil mixture.
در پژوهش حاضر رفتار پیهای رینگی مستقر بر بستر ماسهیی مسلح شده با خردهلاستیک و ژئوگرید در برابر سطوح مختلف بارهای تکراری ناشی از پر و خالی شدن مخزن با استفاده از آزمایشهای تجربی مورد ارزیابی قرار گرفته است. نتایج نشان میدهد افزودن یک لایه مخلوط خاک و خرده لاستیک در ترکیب با ژئوگرید میتواند نشستهای خمیری پی را تا ۶۳٫۵\٪ کاهش داده و باعث عملکرد ارتجاعیتر سیستم شود، بهگونهیی که نسبت (سهم) نشست کشسانی از ۵٫۹۵\٪ در خاک غیرمسلح تا ۲۴٫۲\٪ در خاک مسلح افزایش یابد. همچنین ضخامت بهینهی مخلوط خاک و خردهلاستیک در هر دو حالت حضور یا عدم حضور ژئوگرید برابر با نصف قطر خارجی<br />
پی رینگی است. همچنین نتایج نشان میدهد، استفادهی همزمان از مسلحکنندههای خردهلاستیک و ژئوگرید تأثیر بیشتری در بهبود عملکرد پی رینگی دارد.
https://sjce.journals.sharif.edu/article_21168_99c3ea0d46391172329f3a7104e7b66e.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
EXPERIMENTAL INVESTIGATION OF THE BEHAVIOR OF SAND-EPS BEADS MIXTURE REINFORCED BY GEOTEXTILE LAYERS ENCAPSULATED WITH LENS LAYERS
بررسی آزمایشگاهی رفتار مخلوط خاک - دانههای EPS مسلح با ژئوتکستایل محصور در لنز ماسهیی
57
68
21163
10.24200/j30.2018.50325.2299
FA
امیرفرهنگ
احمدیان
دانشکده ی مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
سید ناصر
مقدس تفرشی
دانشکده ی مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی
0000-0002-7149-6686
Journal Article
2018
02
03
Nowadays, the use of different materials in combination with the soil has been <br />
<br>grown in geotechnical applications. One of these materials is the expanded <br />
<br>polystyrene beads (EPS) that are used to reduce the density and provide <br />
<br>lightweight fill. To investigate the possibility of the strength enhancement of <br />
<br>soil-EPS beads mixture, the number of 34 standard triaxial compression tests <br />
<br>with a diameter of 100 mm and a height of 200 mm have been conducted on the <br />
<br>soil alone, as well as unreinforced and geotextile reinforced soil-EPS beads <br />
<br>mixture with and without sandy lens layers. In addition, 0.5\%, 1\%, and 2\% of EPS beads in weight mixed with sand, four layers of geotextiles, and four layers of sand lens with a thickness of 20 mm were used to prepare the samples. The tests were carried out at three different confining pressures of 100, 200, and 300 kPa up to 15\% of axial strain. Test results show that although EPS beads produce lightweight material, their low rigidity and large volume strain lead to the loss of mixture strength. It can be seen that the ultimate strength of the mixture (at a strain rate of 15\%) decreases 42\%, 65\% and 78\% for 0.5\%, 1\% and 2\% of EPS beads, respectively, as compared with soil alone. To make a balance between weight loss and loss of strength, the use of 0.5\% of EPS beads to mix with sand seems appropriate. To increase the strength of the sand-EPS beads mixture, geotextile layers and sandy lens layers were used. The test results indicate that the geotextile layers encapsulated with sandy lens layers have an influential impact on increasing the strength of mixture. For example, the use of four geotextile layers encapsulated with four sand lens layers gives a 123\% increase in the strength compared with the unreinforced sand-EPS beads mixture. Thus, the combination of these two methods significantly increases the resistance of the mixture. On the basis of the study, the concept of sand-EPS beads mixture reinforced by geotextile layers encapsulated with soil lens layers could be used to improve the performance of backfill over soft soil.
استفاده از مصالح مختلف در ترکیب با خاک، جهت بهبود رفتار یا سبکسازی آن در حال توسعه است. یکی از انواع مصالح اشاره شده جهت اختلاط با خاک و سبکسازی آن، دانههای پلی استایرن منبسط شده (EPS) است. در نوشتار حاضر، جهت بررسی رفتار مخلوط خاک - دانههای EPS و همچنین تأثیر لایههای ژئوتکستایل محصور در لنز ماسهیی در مقاومت آن، تعداد ۳۴ آزمایش سه محوری استاندارد انجام شده است. نتایج نشان میدهند که اگرچه دانههای EPS سبب سبک شدن مخلوط میشوند، اما صلبیت کم آنها سبب افت مقاومت مخلوط نسبت به فقط خاک میشوند. جهت ایجاد تعادل بین کاهش وزن مخصوص و عدم افت زیاد مقاومت مخلوط، مقدار ۰٫۵\٪ جرمی دانههایٓEPS در مخلوط مناسب به نظر میرسد. استفاده از ۴ لایهی ژئوتکستایل محصور در ۴ لایهی لنز ماسهیی در نمونه، ضمن کاهش ۲۵\٪ در وزن مخصوص مخلوط، سبب افزایش مقاومت آن در کرنش ۳\٪ به میزان ۱۲۳\٪ نسبت به حالت مخلوط غیرمسلح میشود.
https://sjce.journals.sharif.edu/article_21163_d516ec9e0b10ad4128778543c80711b8.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
DISPLACEMENT-BASED DESIGN OF TORSIONAL BUILDINGS CONSIDERING TWO-WAY NONLINEARITIES
طراحی براساس تغییرمکان برای سازه های نامنظم پیچشی با در نظر گرفتن نامنظمی در دو جهت
69
77
21167
10.24200/j30.2018.5713.2269
FA
محمد
ثابت راسخ
دانشکده ی مهندسی عمران-دانشگاه صنعتی اصفهان
فرهاد
بهنام فر
دانشکده ی مهندسی عمران، دانشگاه صنعتی اصفهان
0000-0002-4435-3540
Journal Article
2018
02
05
One of the most important and, at the same time, unpredictable types of lateral <br />
loads is earthquake load. Extensive research on the safe and economical seismic <br />
design of structures has been carried out in this field. The research works can <br />
be divided into two general categories: force-based design and performance-based design. Displacement-based design is among the performance-based methods. In this paper, it is purposed to investigate a major drawback in this approach, namely the lack of precision in the estimation of the torsional response of buildings. For this purpose, the model code of displacement-based design (DBD12) is adopted as the basis for studying and modifying a methodology. In this code, there are equations that take into account the involvement of torsional effects in the structural analysis. It is pointed out that the main weak point of the mentioned relationships is the consideration of nonlinear behavior only in the earthquake direction, while a linear behavior is considered in the perpendicular direction when calculating the torsional stiffness. Therefore, it is required to evaluate and modify these relations. For the purpose of this study, three buildings with 4, 7, and 10 floors are selected. Eccentricity in the buildings is assumed to be equal to 0, 5, 10, 15, 20, and 30\% of the plan dimension in the transverse direction. The structural system is selected to be steel moment-resisting frames, and the <br />
diaphragm of the floors is assumed to be rigid. Studying the accuracy of the <br />
design equations for torsion and implementation of the necessary corrections is <br />
done using the nonlinear time history analysis. In this analysis, by utilizing <br />
the OpenSees software, the structures are subjected to 11 consistent records <br />
that are properly scaled. After obtaining the results of exact nonlinear analysis and the displacement-based design method, the equation of the code for calculating the story twist angle is corrected against the average values determined by the nonlinear dynamic analysis. The accuracy of the corrected relationships in comparison with the exact values is evaluated. It is shown that the corrected equations successfully predict the torsional response of the investigated buildings with good accuracy, thus reducing the estimation errors to less than 10\%.
در آییننامهی موجود برای طراحی بر اساس تغییر مکان(DBD12) رابطهیی برای در نظر گرفتن اثرات پیچش در سازهها بیان شده است. این رابطه با فرض رفتار غیرخطی در جهت اعمال حرکت زمین و رفتار خطی در جهت متعامد تنظیم شده است. در این پژوهش رابطهی فوق برای حالت اعمال زلزله در دو جهت متعامد اصلاح میشود. به این منظور، سازههای فولادی با تعداد طبقات معمول(۳، ۷ و ۱۰ طبقه)، خروج از مرکزیتهای مختلف با سیستم قاب خمشی و رفتار غیرخطی تحت رکوردهای ۱۱ زلزله تحلیل میشوند. مقادیر چرخش طبقات برای زلزلههای مختلف محاسبه شده و در نتیجه رابطهی آییننامه با اعمال ضرایب اصلاح مناسب برای اثر زلزله با دو مؤلفهی افقی متعامد اصلاح میشود. در این تحقیق نشان داده شده که مقادیر دقیق زاویهی پیچش<br />
طبقه میتواند تا دو برابر مقادیر حاصل از روابط آییننامه باشد. این در حالی است که با استفاده از رابطهی اصلاح شده در این تحقیق، بیشترین اختلاف نسبی این دو دسته مقادیر به کمتر از ۱۰\٪ کاهش مییابد.
https://sjce.journals.sharif.edu/article_21167_de77ea642691b10d0ca56e9b2bd49458.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
THE EFFECT OF LEAD RUBBER BEARING SEISMIC ISOLATOR ON PROGRESSIVE COLLAPSE POTENTIAL OF STEEL MOMENT FRAMES
تأثیر جداساز لرزهیی لاستیکی با هسته ی سربی بر پتانسیل خرابی پیش رونده ی قابهای خمشی فولادی تحت بار لرزه یی
79
90
21169
10.24200/j30.2018.50361.2301
FA
میلاد
فخاری نیا
دانشگاه آزاد اسلامی، واحد رامسر
طاها
بخشپوری
دانشکده فنی و مهندسی شرق گیلان، دانشگاه گیلان
0000-0002-5955-5495
سعید
پورزینلی
دانشکده فنی، دانشگاه گیلان
0000-0003-2399-5621
Journal Article
2018
02
17
Progressive collapse is defined as a local failure that may occur due to various factors in structural members; then, it can spread to adjacent members and ultimately result in the total collapse of the structure or a large portion of it. Though the abnormal loads could cause progressive collapse, many structures have experienced progressive collapse due to seismic actions in our modern history. Recently, some code specifications and guideline requirements such as Unified Facilities Criteria (UFC) have introduced different analysis methods for the assessment of progressive collapse in buildings based on increasing strength, ductility, and continuity. Many research works have been conducted in relation to the phenomenon of progressive collapse almost considering the gravity loads and, in recent years, seismic progressive collapse has attracted much attention and is an open research area for researchers. Lead Rubber Bearing (LRB) is considered as one of the most conventional isolation systems that has been studied and examined theoretically and developed widely in practice.This study investigates the potential of LRB base isolation under progressive collapse. For this purpose, the behavior of intermediate steel moment frames in the two cases of fixed and with the LRB seismic isolator with 4, 8, and 12 number of stories under progressive collapse is compared using nonlinear static and dynamic analysis in different situations of the column removal. At first, two fixed and isolated 3D structures were designed by SAP2000 software according to Iranian codes; then, analysis was performed under gravity load (consist of nonlinear static and dynamic analysis) according to UFC guild-lines and seismic loading (by nonlinear time history analysis) using Perform-3D software. The base isolation is modeled with an isolator element in the Perform-3D software, and these separators provide hysteresis damping through the sink of lead core.The addition of seismic base isolation system to structures averagely reduces the response of the frames under earthquakes by 61\%. The progressive collapse potential of fixed and base isolated structures in the middle and corner column removal conditions is the same as the results of nonlinear static and dynamic analysis according to loading UFC instructions. Furthermore, the results of the progressive collapse analysis show that increasing the number of structural members leads to a reduction in progressive failure potential. It is observed that the use of base isolation system has a significant impact on the localization of the failures under seismic loads and prevention of their expansion in the structure.
«خرابی پیشرونده» به خرابی موضعی که بر اثر عوامل مختلف در اعضای باربر سازه ایجاد و سپس به اعضای مجاور سرایت میکند و در کل سازه گسترش مییابد اطلاق میشود. یکی از عوامل موجد خرابی در سازهها «زلزله» است. بر اثر زلزلههای شدید ممکن است در اجزای سازه نیروهای مضاعف ایجاد شود که باعث گسیختگی عضو باربر و در نتیجه پدیده خرابی پیشرونده میشود. بدین منظور در این مطالعه، به مقایسهی رفتار قابهای خمشی فولادی با شکلپذیری متوسط، در دو حالت پایه ثابت و دارای جداسازی لرزهیی لاستیکی با هستهی سربی، تحت خرابی پیشرونده و با استفاده از تحلیلهای استاتیکی و دینامیکی غیرخطی در موقعیتهای مختلف حذف ستون پرداختهایم. افزودن سیستم جداساز لرزهیی به سازه باعث کاهش پاسخ سازهها تحت زلزله میشود.همچنین نتایج تحلیلهای خرابی پیشرونده نشان میدهد که افزایش تعداد طبقات سازه موجب کاهش پتانسیل خرابی پیشرونده میشود و استفاده از سیستم جداساز لرزهیی تأثیر قابل توجهی در موضعی کردن خرابیها تحت بارهای لرزهیی و جلوگیری از گسترش آنها در سازه دارد.
https://sjce.journals.sharif.edu/article_21169_3991e6e9b43ae15e123552ecbc20c7fd.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
معرفی یک مدل دوفازی برای تحلیل دینامیکی غیرخطی سازههای خاک مسلح با استفاده از نظریهی خمیری تعمیم یافتهی اصلاح شده
91
106
21166
10.24200/j30.2018.50390.2303
FA
امین
ایرجی
دانشکده ی فنی خوی، دانشگاه ارومیه
اورنگ
فرزانه
دانشکده ی مهندسی عمران، دانشکده ی فنی، دانشگاه تهران
Journal Article
2018
02
28
High flexibility and stability of reinforced soil walls make them very useful <br />
structures and cause their extended applications as retaining structures at <br />
side embankments of roads and slopes and as abutments, especially in regions <br />
with high seismic risk. Therefore, such structures could be recommended for <br />
Iran as a country with high seismic risk. Reinforced soil structures may <br />
present \ significant \ deformations under strong \ earthquake<br />
motions. In this <br />
regard, they will not \ provide expected \ functionality.<br />
Therefore, the necessity <br />
of extension in the application of reinforced soil walls, especially high <br />
geosynthetic reinforced soil walls, and the significance of plastic <br />
displacement in these structures motivated researchers to give special <br />
attention to the prediction of reinforced soil walls' displacements <br />
experimentally and numerically. Two techniques are available for the numerical <br />
simulation of the reinforced soil masses. In the first method, the soil and <br />
inclusion are considered separately in a layered or discrete analysis. This <br />
procedure is very time consuming. The second approach is a homogenization <br />
method by which reinforced soil is replaced with an equivalent homogeneous, yet <br />
anisotropic, medium. Layer-by-layer modeling is not needed in the <br />
homogenization methods; therefore, the modification of the arrangement of <br />
inclusions is easy. The two-phase model is the extension of classical <br />
homogenization methods and has developed in the recent two decades. This <br />
approach is actually a mechanical framework based on the virtual work method. <br />
It is a macroscopic description of a composite medium, which is the superposition of individual continuous media (phases). The matrix phase (soil) and einforcement phase (inclusion) are geometrically coincident at any given point in the multiphase material. The proposed model introduces a two-phase model to simulate the nonlinear dynamic behavior of geosynthetic reinforced soil walls. A modified generalized plasticity model for granular materials was used in the proposed two-phase model. The approach was validated by the comparison of the results and those of eight reduced-scale reinforced soil walls subjected to seismic loading in shaking tables. The predicted lateral displacement showed good agreement with the test results. The two-phase model predicted critical acceleration amplitudes similar to those observed in the experiments. The predicted potential failure surfaces in the two-phase model were consistent with the observed deformation patterns.
در پژوهش حاضر، یک مدل دوفازی برای تحلیل دینامیکی و غیرخطی سازههای خاک مسلح ارائه شده است، که از مدل خمیری تعمیم یافتهی پاستور ـ زینکوویچ ـ چان برای خاک و یک مدل ارتجاعی ـ خمیری کامل ترسکا برای مسلحکننده بهره میبرد. مدل دوفازی توسعه یافته، یکی از روشهای همگنسازی است، که بر پایهی روش کار مجازی بنا نهاده شده است. در مدل دوفازی، تودهی خاک مسلح از بر هم نهی دو فاز پیوستهی ماتریس (خاک) و مسلحکننده (جوشن) تشکیل شده است. مدل خمیری تعمیم یافته، ابتدا اصلاح و سپس برای رفتار فاز ماتریس استفاده شده است. بین فازها از فرض پیوند کامل استفاده شده است. برای صحتسنجی مدل توسعه داده شده، تعداد دو سری دیوار خاک مسلح در مقیاس کوچک تحت بارهای دینامیکی میزلرزه شبیهسازی شدهاند. تغییر شکلهای جانبی و ماندگار پیشبینی شده در مدل دوفازی با نتایج آزمونهای میزلرزه مقایسه شدند. بررسی الگوی تغییر شکل و سطوح گسیختگی بالقوه در مدل دوفازی، حاکی از مود تغییر شکل واژگونی و تشکیل گوهی لغزشی دو خطی در دیوار خاک مسلح است، که با نتایج آزمایشگاهی سازگار است.
https://sjce.journals.sharif.edu/article_21166_6b1316ad4f91a5e87ffcd94eac5726af.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
بررسی تأثیر افزایش دما در خصوصیات مکانیکی و ریزساختار بتن حاوی نانولولهی کربنی چندجداره
107
116
21158
10.24200/j30.2018.50388.2314
FA
مجید
قلهکی
دانشکده ی مهندسی عمران، دانشگاه سمنان
قاسم
پاچیده
دانشکده ی مهندسی عمران، دانشگاه سمنان
امین
مشتاق
دانشکده ی مهندسی عمران، دانشگاه گرمسار
Journal Article
2018
03
04
In this paper, the effect of multi-walled carbon nanotubes on the properties of <br />
concrete was evaluated in the post-heat treated condition. Following this, a <br />
number of cylindrical specimens (10 x 20 cm) including multi-walled carbon <br />
nanotubes in different percentages of 0.5, 1 and 1.5\% by weight of cement were <br />
cast. Later on, concrete specimens in the electric furnace were exposed to <br />
temperatures of 25, 100, 250,500 and $700^{0}C$ and after cooling down, compressive and tensile strength tests were carried out on them. The results showed that by increasing multi-walled carbon nanotubes in concrete, compressive and tensile strengths of concrete were increased up to 138\% and 88\%, respectively. In addition, dissipation of energy and modulus of elasticity of concrete specimens were up to 2 times more than that of control concrete specimens. The SEM test results indicated that a strong bond between concrete particles exists at the room temperature and upper than that.
در نوشتار حاضر، به بررسی رفتار پس از حرارت بتنهای حاوی نانولولهی کربنی چندجداره <br />
پرداخته شده است. بدین منظور، تعدادی نمونه در قالبهای استوانهیی به ابعاد 20\times{10}$<br />
سانتیمتر حاوی مقادیر ۰\٪، ۰٫۵\٪، ۱\٪، و ۱٫۵\٪ وزنی سیمان نانولولهی کربنی چندجداره ساخته شدند. سپس نمونهها در کورهی الکتریکی تحت دماهای ۲۵، ۱۰۰، ۲۵۰، ۵۰۰ و ۷۰۰ درجهی سانتیگراد قرار گرفتند. پس از انجام عملیات حرارتی، آزمایشهای مقاومت فشاری و کششی بر روی آنها انجام شده است. نتایج حاکی از آن است که با افزایش درصد استفاده از نانولولهی کربنی چندجداره در بتن، مقاومت فشاری و کششی تا میزان ۱۳۸\٪ و ۸۸\٪ افزایش مییابد. همچنین ظرفیت جذب انرژی و مدول کشسانی تا دو برابر حالتی خواهد بود که از مواد نانو در بتن استفاده نشده است. همچنین بر روی نمونهها، آزمایش SEM نیز صورت گرفت که نتایج آن گویای پیوند قوی بین ذرات بتن حاوی مواد نانو در دمای اتاق (۲۵ درجهی سانتیگراد) و دماهای بالاست.
https://sjce.journals.sharif.edu/article_21158_2bf97c4c6d6ac7bc9e0f315e0a366862.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
STUDY ON THE EFFECT OF INHERENT ANISOTROPY ON THE BEHAVIOR OF FINE- GRAINED SOILS AT THE NORTH OF TABRIZ
مطالعه ی اثر ناهمسانی ذاتی در رفتار خاکهای ریزدانه ی منطقه ی شمال تبریز
117
126
21162
10.24200/j30.2018.50116.2287
FA
حسین
سلطانی جیقه
دانشکده ی فنی و مهندسی، دانشگاه شهید مدنی آذربایجان، تبریز
0000-0001-6015-3437
چیا
زارعی
دانشکده فنی، دانشگاه ارومیه
کاظم
بدو
دانشکده فنی، دانشگاه ارومیه
Journal Article
2018
02
06
A study of shear strength and compressibility characteristics of soils considering anisotropy phenomenon is essential to the accurate design of foundations and stability analysis of earth structures. The directional dependency of physical and mechanical behavior of soil is referred as anisotropy phenomenon. The sedimentation process in soil formation arranges the soil particles in a special direction, known as the bedding direction. Due to this pattern, changing loading direction relative to stratification changes the soil behavior, which is known as inherent anisotropy. On other hand, the construction of high-rise buildings has developed at the north and northwest of Tabriz city. Subsurface materials of this area have formed from yellow and olivaceous marl. With regard to the construction of building foundations and the necessity of stability of excavations in this area, it is the most important characteristics of these soils with considering anisotropic behavior. In this research, a series of triaxial tests were conducted to evaluate the <br />
mechanical behavior of a fine-grained soil and the effect of inherent anisotropy on the behavior of fine-grained soils located in Negin-Park and Marzdaran regions in Tabriz city. To this end, a special soil sampler was designed to coring soil with capability in different directions. Then, cylindrical triaxial samples were prepared with 38 mm in diameter and 76 mm in height and saturated by passing distilled water and applying back pressure up to the B-value of 0.97. The samples finally were isotropically consolidated under effective stresses of 200, 300 and 500 kPa, and loaded at a rate of 0.05 mm/min. The results showed that the shear strength and compressibility of the samples intensively depend on the sampling direction so that the shear strength and pore water pressure reach the minimum and maximum values at a given anisotropy angle, respectively. The reason for this behavior can be related to change failure surface as compared with bedding orientation.
جهت طراحی دقیق پیسازهها و همچنین آنالیز پایداری سازههای خاکی، مطالعهی مقاومت برشی خاکها با توجه به اثر ناهمسانی اهمیت زیادی دارد. از طرف دیگر، در سالهای اخیر ساخت و ساز و بلندمرتبهسازی در نوار شمالی و شمال شرق شهر تبریز رواج پیدا کرده است. مصالح سطحی مناطق مذکور عمدتاً از مارنهای زرد و زیتونی رنگ تشکیل یافته است. با توجه به اجرای پی ساختمانها بر روی مصالح ذکر شده و همچنین لزوم پایداری گودبرداریهای موجود در منطقه و عدم لحاظ اثر ناهمسانی در خاک مناطق نوار شمالی و شمال شرق، ویژگیهای رفتاری خاک مناطق<br />
اخیر اهمیت زیادی پیدا کرده است. در پژوهش حاضر، رفتار مکانیکی خاکهای مارن مناطق مرزداران و نگین پارک با انجام آزمایش سهمحوری و با لحاظ ناهمسانی ذاتی مطالعه شده و نتایج نشان داده است که ناهمسانی در مقاومت برشی و فشار آب حفرهیی هر دو خاک تأثیرگذار بوده و<br />
باعث شده است که در یک زاویهی خاص، مقاومت برشی کمترین و فشار آب حفرهیی بیشترین مقدار را داشته باشد. میزان بیشینهی کاهش مقاومت برشی در فشارهای محصورکنندهی ۲۰۰، ۳۰۰ و ۵۰۰ کیلوپاسکال برای مارن زرد به ترتیب ۳۲\٪، ۳۱\٪ و ۲۰٫۴\٪ و برای مارن زیتونی به ترتیب ۳۰\٪، ۲۹٫۷\٪ و ۲۱٫۸\٪ بوده است. روند مشابهی برای تغییرات مقاومت در سطوح کرنش مختلف مشاهده شده است.
https://sjce.journals.sharif.edu/article_21162_3e64963d5c0f6d07458a3d9a8ebfa57d.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
A SEMI-EMPIRICAL MODEL FOR PREDICTING SEISMIC PERMANENT DISPLACEMENT OF SLOPES BASED ON IRAN EARTHQUAKE RECORDS
مدل نیمه تحلیلی برای پیش بینی تغییرمکان لرزه یی شیب ها بر مبنای زلزله های ایران
127
136
21170
10.24200/j30.2018.50518.2319
FA
علی
لشگری
دانشکدهی مهندسی عمران، دانشگاه سمنان
یاسر
جعفریان
پژوهشکدهی مهندسی ژئوتکنیک، پژوهشگاه بینالمللی زلزلهشناسی و
مهندسی زلزله
عبدالحسین
حداد
دانشکده ی مهندسی عمران، دانشگاه سمنان
0000-0002-7612-6780
Journal Article
2018
03
13
The Iranian plateau is one of the seismic active zones of shallow crustal <br />
earthquakes in the world so that annually thousands earthquake occurs in the <br />
Iranian plateau. Meanwhile, due to the effect of topographic and geological <br />
characteristics of its relief, the Iranian plateau is subjected to diffuse phenomena of landslide, especially in Alborz and Zagros mountains, which are exacerbated by the high seismic activity. The earthquake-induced landslides have reportedly caused major human fatalities and economic losses in Iran. The prediction of sliding displacement can decrease landslide hazards to the civil engineering strcutures. The semi-empirical models have recently received more attention from the geotechnical earthquake engineering practitioners because of <br />
their applicability, simplicity, and reasonable performance in large displacements. The rigid block-rotation approach was developed based on the increase of critical acceleration caused by the downward movement of sliding soil mass. This paper represents a semi-empirical model for the earthquake-induced displacement of Iran's slopes using the rigid block-rotation approach. A collection of 3954 strong motion records was used to generate the model based on the results of slidinganalyses. The semi-empirical model is presented based on more than 138,000 rigid block-rotation analyses using several input parameters. The model predicts sliding displacement in terms of yield coefficient $(k_y)$, slip length of sliding mass (L), and Arias Intensity $(I_a)$. It is shown that slip length of sliding mass has an important role in the prediction of seismic permanent displacement, which is generally ignored in the semi-empirical models. The proposed model can be simply used to estimate the seismic displacement of slopes and earthquake-landslide hazards in seismic prone regions of the Iranian plateau.
فلات ایران، یکی از مناطق لرزهخیز جهان است که به دلیل شرایط توپوگرافی ویژه، همواره در معرض زمینلغزشهای ناشی از زلزله بوده است. در نوشتار حاضر، با استفاده از جمعآوری ۳۹۵۴ رکورد لرزهیی رخداده در ایران و تحلیل بلوک صلب اصلاح شده بر مبنای اثر دوران و با بهکارگیری ضرایب گسیختگی و طولهای لغزش مختلف، یک مدل نیمهتحلیلی برای پیشبینی تغییرمکان ماندگار لرزهیی شیبهای خاکی در فلات ایران پیشنهاد شده است. انحراف معیار خطای مدل در حد قابل قبول و در حدود ۰٫۶ بوده است. مقایسهی مدل پیشنهادی با سایر مدلها نشان میدهد که انحراف معیار خطای مدل در حدود ۱٫۲۵ و ۳٫۳۳ برابر کمتر از مدل مشابه ارائه شده برای ایران و جهان است. بهکارگیری مدل نیمهتحلیلی پیشنهادی میتواند کمک شایانی به شناسایی عملکرد لرزهیی شیبهای موجود در کشور انجام دهد.
https://sjce.journals.sharif.edu/article_21170_1ce44433254dbd33f0eec2175d90f67e.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
FREE VIBRATION OF FUNCTIONALLY GRADED BEAMS ON TWO PARAMETERS ELASTIC FOUNDATION USING DIFFERENTIAL QUADRATURE METHOD
ارتعاش آزاد تیرهای مدرج هدفمند بر بستر ارتجاعی دو پارامتری با استفاده از روش دیفرانسیل کوادریچر
137
143
21171
10.24200/j30.2018.50883.2351
FA
افشین
خلیلی
بخش مهندسی راه، ساختمان و محیط زیست، دانشکده ی مهندسی، دانشگاه شیراز
علیرضا
وثوقی
بخش مهندسی راه، ساختمان و محیط زیست، دانشکده ی مهندسی، دانشگاه شیراز
محمودرضا
بنان
بخش مهندسی راه، ساختمان و محیط زیست، دانشکده ی مهندسی، دانشگاه شیراز
محمدرضا
بنان
بخش مهندسی راه، ساختمان و محیط زیست، دانشکده ی مهندسی، دانشگاه شیراز
Journal Article
2018
05
02
Todays, modern materials are widely used for construction of various structural <br />
elements such as beams, plates, shell and the other elements. One of these <br />
modern materials is functionally graded materials (FGMs). The uses of these <br />
materials are due to their mechanical properties and thermal conductivity. <br />
During the two past decades structural elements made from these materials have <br />
received wide applications in aerospace, mechanical and civil engineering. <br />
Material properties of the functionally graded materials vary continuously from <br />
metal on one surface to ceramic on the other surface. The distribution makes <br />
these materials applicable in different fields of engineering, especially in <br />
environments subjected to high thermal change. For obtaining the governing <br />
equations of the structural elements different theories of elasticity can be <br />
used. For solving the problems different analytical, numerical and semi-analytical methods can be applied. Among the numerical methods finite element, finite difference, finite volume, differential quadrature and the other methods may be used for solving the problems. The differential quadrature (DQ) method is an accurate, efficient and robust numerical solver with low computational cost. The DQ method has been used for solving free vibration, dynamic analysis and so on. This method can be used for solving structural elements alone or in conjunction with the other analytical or numerical methods. In this study, the method is used for free vibration analysis of functionally graded beams on two parameter elastic foundation. The elastic foundation has linear and shearing layers. The governing equations are derived based on the first order shear deformation theory (FSDT). The governing equations and the related boundary conditions are discretized using the DQ method. Then by employing method of separation of variables, the obtained equations are transferred from temporal domain to frequency domain and the frequency of the beam is calculated. Applicability, rapid rate of convergence and accuracy of the proposed method are demonstrated via solving some examples. Influences of different parameters such as linear and shearing layers, boundary conditions and height-to-length ratio on frequency of the beams are investigated.
تیرهای قرار گرفته بر بسترهای ارتجاعی، یک مدل پر کاربرد در تحلیل و بررسی سازههای مهندسی هستند. در دهههای اخیر، به دلیل داشتن مقاومت بالا در برابر حرارت، جذب انرژی و وزن سبک، مطالعاتی در رابطه با مواد نوین همچون مواد مدرج هدفمند انجام شده است. خواص<br />
مکانیکی مواد مدرج هدفمند بهصورت پیوسته از یک سطح به سطح دیگر و از فلز به سرامیک تغییر میکند. در نوشتار حاضر، برای اولین بار معادلات حاکم بر ارتعاش آزاد تیرهای مدرج هدفمند بر بستر ارتجاعی دو پارامتری شامل فنر خطی و لایهی برشی با استفاده از نظریهی برشی<br />
مرتبهی اول به دست آمده و با بهکارگیری روش دیفرانسیل کوادریچر تجزیه شدهاند. با تجزیهی شرایط مرزی با روش دیفرانسیل کوادریچر، اثر شرایط مذکور در معادلات حاکم تجزیه شده بررسی و دستگاه معادلات به دست آمده به حوزهی بسامد منتقل و بسامد مسئله تعیین شده است. تأثیریر شرایط مرزی، پارامترهای بستر ارتجاعی، نسبت طول به ضخامت، و ضریب کسر حجمی از موارد بررسی شده در نوشتار حاضر است.
https://sjce.journals.sharif.edu/article_21171_3bffb22016bfd9b786593a2c886061a5.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
36.2
1.1
2020
05
21
DISPERSIVE SOIL AMENDMENT USING LIME AND BENTONITE AND PLASTICITY IMPROVEMENT IN EARTH DAMS FOR REDUCING ARCHING EFFECTS
تثبیت خاک واگرا با آهک و بنتونیت با بهسازی خاصیت خمیری برای کاهش اثرات قوس زدگی در سدهای خاکی
145
151
21164
10.24200/j30.2018.5174.2208
FA
علیرضا
فیروزفر
دانشکده ی مهندسی عمران، دانشگاه زنجان
محمد
جعفری
دانشکده ی مهندسی عمران، دانشگاه زنجان
Journal Article
2017
12
05
Problematic soils are sometimes needed to be used in dam construction. This <br />
usually occurs when appropriate materials are located far from the dam site and <br />
cannot be used for economic reasons. In this case, available problematic soils <br />
(e.g., dispersive soils) can be utilized after amendment. The amended soil is <br />
supposed to not show its problematic behavior before treatment. It is conventional to treat dispersive soils by the addition of the most used one being lime. However, the addition of lime may cause a considerable reduction in the plasticity index of the mixture that, in turn, can produce other problems. An important consequence caused by the low plasticity index of the amended soil used in earth dams is an arching phenomenon, which can finally lead to failure of the dam. In this research, lime and bentonite are used to amend dispersive soil samples taken from Mirzakhanloo-Dam site located in Zanjan Province. The aim was to treat the dispersivity of samples and, also, to avoid the arching problem. For this reason, a set of laboratory tests was conducted on the prepared samples. Lime was used in samples with amounts of 0.6, 1, 1.5, 3, 5 percents of dry weight of the soil. Moreover, bentonite was used with amounts of 3, 5, 10, 15, and 20 percents. Pinhole test, double hydrometer test, crumb test, and chemical test were performed on the pure soil and additive-soil samples to evaluate the dispersivity of soil samples. Moreover, Atterberg limits, particle size, and hydraulic conductivity of samples were examined. The result showed that the combination of 5\% lime and 15\%<br />
bentonite can solve the problem such that, on the one hand, the dispersivity of soil is treated and, on the other hand, the arching problem is controlled. Almost all previous research studies have recommended the lime and other additives for the amendment of dispersive soils regardless of the arching problem. This paper strongly recommends considering this problem. Since the creation of a small crack in dams can lead to failure with regard to the piping problem, it is important to <br />
carefully assess the outcome of soil improvement programs and control the <br />
plastic index of the amended soil.
یکی از عوامل مهم تخریب سدهای خاکی آبشستگی است. این پدیده با وقوع یک ترک حتی کوچک در بدنهی سد میتواند شروع و گسترش یابد. از علل وقوع ترک پدیدهی قوسزدگی است و با رعایت محدودهی مناسب شاخص خمیری و نفوذپذیری، میتوان تا حدود زیادی سد را در برابر تخریب ناشی از آبشستگی و قوسزدگی ایمن کرد. از آنجا که مصالح قرضهی در دسترس همیشه مناسب نیستند میتوان با اختلاط توأم مصالحی چون آهک و بنتونیت ضمن تثبیت خاک از عواقب افزودن مواد تثبیتکننده نیز جلوگیری کرد. این مقاله، مطالعهیی است در خصوص خاک قرضهی سد میرزاخانلو واقع در استان زنجان (شهرستان طارم)، که پتانسیل واگرایی بالایی دارد و برای استفاده در بدنهی سد باید اصلاح شود. هدف از اصلاح رسیدن به عدم واگرایی و در عین حال بهمنظور کاهش خطر ترکخوردگی، دستیابی به شاخص خمیری (PI) در محدودهی ۱۶ تا ۳۰ است. طبق نتایج حاصله، ترکیب ۵ درصد آهک و ۱۵ درصد بنتونیت مناسبترین حالت برای<br />
تأمین عدم واگرایی و شاخص خمیری مطلوب است.
https://sjce.journals.sharif.edu/article_21164_24c5fed6877460348cd1e963e95dd382.pdf