دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
NUMERICAL SIMULATION OF LONG WAVES (TSUNAMI) FORCES ON CAISSON BREAKWATERS
مدلسازی عددی نیروهای وارده از طرف امواج بلند (سونامی) بر موجشکنهای کیسونی
3
12
1048
FA
حسین
نصیرائی
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس
0000-0002-8987-4657
محمد
حیدرزاده
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس
مهدی
شفیعی فر
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس
Journal Article
2014
04
23
In this research, long wave (tsunami) forces on caisson breakwaters have been investigated using numerical modeling. Verifications of the simulation results using experimental data, analytical formula and empirical formula show that numerical model is capable of modeling the aforesaid problem with enough accuracy. Several numerical simulations have been performed in the framework of this thesis to study different parameters affecting the forces induced by long waves on caisson breakwaters. An empirical equation has been introduced to estimate non-breaking long wave forces on caisson breakwaters. Results indicate that the force is a function of water depth and wave period in addition to wave amplitude. By moving the breakwater towards the shoreline, first, the force
decreases, then, the force increases, by changing the shape of the wave, and, finally, the force significantly decreases after wave breaking. Results suggest that the wave action time on the breakwater shortens by decreasing water depth. Results show that the amount of exerted force by long wave, in our investigated model, is around 3.5 times more than the amount of force by short wave. Moreover, vertical distribution of long wave forces on the structure is more uniform than that for short waves. By increasing the seabed slope, wave amplitude and speed of horizontal orbitals in the wave crest significantly increase, which further increases wave forces on the structure. Results show that in a sloping bed, by increasing water depth, the effect of changes in bed slope on the amount of wave force is insignificant. Therefore, for relatively deep water, the seabed slope can be overlooked and then the force can be calculated using the formula for flat seabeds. The results also show that unlike the previous formula, the pressure unbreaking waves at the still water level is also influenced by water depth. Based on our results, breaking waves exert forces up to six times more compared to non-breaking waves.
در این پژوهش، نیروهای وارده از طرف امواج بلند (سونامی) بر موجشکنهای کیسونی با کمک شبیهسازی عددی مورد مطالعه قرار گرفته است. نتایج صحتسنجی نشان میدهد که مدلعددی مورد استفاده، دقت خوبی برای مدلسازی نیروهای وارده بر موجشکنهای کیسونی از طرف امواج بلند دارد. در ادامه، فرمول تجربی برای محاسبهی نیرو معرفی شده است. نتایج نشان میدهد فشار نقطهیی وارد بر سازه علاوه بر ارتفاع موج، با عمق آب نیز مرتبط است. همچنین با جابهجایی سازه به سمت ساحل، مقدار نیروهای وارده در ابتدا کاهش مییابد؛ ولی در ادامه با تغییر فرم موج، نیرو افزایش مییابد و در نهایت پس از شکست موج، نیرو با شیب تندی کاهش مییابد. در پایان، بررسیهای انجامشده نشان میدهند که در حالت شکست موج بر روی بدنهی موجشکن، نیروهایی تا حدود ۶ برابر نیروی امواج ناشکنا بر موجشکن وارد شده است.
https://sjce.journals.sharif.edu/article_1048_270c7220c00f5dd0cad217b8934c9b85.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
INVESTIGATING THE CRITICAL STATE BEHAVIOR OF CLAYEY SAND UNDER STATIC AND CYCLIC LOADING.
بررسی رفتار حالت بحرانی ماسه های رس دار تحت بارگذاری استاتیکی و سیکلیک
13
21
1053
FA
امید
نعیمی فر
دانشگاه آزاد اسلامی،واحد ملارد، گروه مهندسی عمران، ملارد، ایران
سیدشهاب الدین
یثربی
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس
Journal Article
2014
05
03
Observation of such phenomena as liquefaction and flow behavior generally occurring in loose and saturated sands have timulated extensive investigation into sands and the parameters involved in their critical state behavior.Most studies conducted so far have mainly focused on clean sand or its mixtures containing non-plastic fines, with not much attention paid to the soil mechanics of the critical state of clayey sands. The reason for this neglect may be the misconception that plastic properties in clay prohibit flow behavior and liquefaction. However, the studies of the Northridge 1994, Kokaeli 1999, Chi Chi 1999, and Niigata 2004 earthquakes have indicated that notable settlements occur in soil containing considerable amounts of clay, resulting in great destruction. Researchers have emphasized that more detailed investigation is needed to determine the critical state behavior of clayey sands.
The critical state behavior of clayey sands has been investigated using cyclic and static triaxial tests. Based on the results, in low fine content, more density will result in a significant increase in steady state strength, while, at high fine content, the effect of density on the steady state strength would be insignificant. Also, increasing fine content results in more instability, but the trend reverses after a threshold value. This threshold value is independent of cyclic or static loading.Comparing the results of different plasticity fines under similar conditions shows that increasing plasticity leads to more instability under the threshold value, while the effect of plasticity will be more significant with an increase in fine contentFirooz-kooh crashed silica sand (sand 161) was used in the experiments due to its desirable properties. Specimens were prepared using the wet tamping method. Having obtained the appropriate blend, it was poured into a special mould and compacted in 6 layers to prepare specimens 50 mm in diameter and 100 mm in height.
رفتار حالت پایدار ماسههای حاوی ریزدانهی خمیری با استفاده از آزمایشهای سه محوری سیکلیک و استاتیک بررسی شده است. نتایج آزمایشها نشان داده است که افزایش چگالی در درصدهای کم ریزدانه منجر به افزایش قابل ملاحظه در مقدار مقاومت حالت پایدار خواهد شد، در حالی که با افزایش درصد ریزدانه، تأثیر تراکم در مقاومت در کرنشهای زیاد تقریباً نامحسوس خواهد شد. همچنین با افزایش ریزدانهی خمیری، ناپایداری ترکیبات افزایش مییابد و این روند بعد از رسیدن به یک حد آستانه معکوس میشود. حد آستانه مستقل از نوع بارگذاری است و برای آزمایشهای سیکلیک و استاتیکی تقریباً یکسان است. مقایسهی نتایج مربوط به چند نوع ریزدانه با حالتهای خمیری مختلف و در شرایط یکسان، نشان داده است که در زیر حد آستانه، افزایش حالت خمیری ترکیب منجر به ناپایداری بیشتر آن خواهد شد، ضمن آنکه با افزایش درصد ریزدانهی خمیری، تأثیر حالت خمیری آن در نتایج بیشتر خواهد شد.
https://sjce.journals.sharif.edu/article_1053_401c9c017d378c013942805a56e9251f.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
ارزیابی برش و زاویهی دریفت دیوارهای برشی فولادی تقویتشده با اتصال صلب تحت تحلیل دینامیکی غیرخطی در حوزههای دور و نزدیک گسل
23
32
1050
FA
مجید
قلهکی
دانشکده مهندسی عمران، دانشگاه سمنان
مهدی
نصیری
دانشکده مهندسی عمران، دانشگاه سمنان
Journal Article
2014
07
23
This paper presents research work on earthquake damage, with emphasis on near and far-fault earthquakes. Near-fault region earthquake research is very important regarding the criteria of the current seismic design standard spectrum of Iran (2800 Iran Earthquake regulation), which is based on probabilistic processes and prolonged periods, and describes ground motion in far-fault regions.Over the past four decades, the steel plate shear wall (SPSW) system has been used in a number of buildings in the world as part of the lateral force-resisting system. In today's designs, the SPSW system is designed to buckle elastically, develop a tension field and, \u{fb01}nally, to yield under extreme loading. To increase the elastic buckling capacity, the common practice is to increase the web thickness, or to use horizontal and vertical plate stiffeners. In this paper, an investigation into the seismic behavior of stiffened steel plate shear walls with height is undertaken.In this research, three FE models of stiffened steel shear walls with rigid connections, with 3, 7 and 15 stories and five spans, under nonlinear dynamic time history analysis, were evaluated. Results show that structural demands in near-fault regions are more than standard 2800 Iran earthquake regulation (v3) criteria. The average of storey shear in 3 storey models in far fault of 8.64\% is more than in near fault. This value in 7 and 15 storey model sequences, 4.4 and 4.49 percent, is more than in near fault. The average of drift angle in near fault in 3, 7 and 15 storey model sequences, 46, 192 and 102 percent, is more than in far fault. Structural responses include shear and drift angle, which, in near-fault regions, is more than in far-fault regions. So, that authenticity, from far-fault regions, in the 3-storey model, is transferred to near-fault in models with greater height. The results show a transition zone in the behavior of the 7 storey model from far-fault to near-fault and, with increased height, near-fault effects are remarkable.
مطالعات انجامشده بر روی تخریبها و آثار زلزلهها، تفاوت اثرات زلزلهها در حوزهی نزدیک گسل و در خارج از این محدوده را نشان میدهد.
اهمیت مطالعهی حوزهی نزدیک گسل زمانی بیشتر میشود که ضوابط و طیف طرح لرزهیی در آییننامههای طرح لرزهیی نظیر استاندارد ۲۸۰۰ زلزلهی ایران براساس فرایندهای احتمالاتی و دورههای زمانی طولانیمدت بهدستآمده و فقط حرکات در حوزهی دور را توصیف میکنند. بدین منظور ۳ مدل اجزاء محدود دیوار برشی فولادی تقویتشده با اتصال صلب ۳، ۷ و ۱۵ طبقه با ۵ دهانه، تحت تحلیل دینامیکی غیرخطی تاریخچهی زمانی قرار گرفته و نتایج نشان داده است که ضوابط استاندارد ۲۸۰۰ زلزلهی ایران پاسخگوی نیازهای سازه در حوزهی نزدیک نیست. پاسخهای سازه شامل برش و زاویهی دریفت، در حوزهی نزدیک بیشتر از حوزهی دور است و با افزایش ارتفاع، اثرات حوزهی نزدیک بیشتر میشود.
https://sjce.journals.sharif.edu/article_1050_530a5db6e4adc17364b55f112fe0a33b.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
INFLUENCE OF THE PROPERTIES OF PORE-FLUID RICH IN HEAVY METAL ON ERRORS ASSOCIATED WITH CONSOLIDATION AND ATTERBERG LIMIT EXPERIMENTS
تأثیر خصوصیات سیال حفرهیی حاوی آلایندهی فلز سنگین در خطای آزمایشهای تحکیم و حدود اتربرگ
33
42
1047
FA
وحیدرضا
اوحدی
دانشکده مهندسی، دانشگاه بوعلی سینا
صلاح الدین
حمیدی
دانشکده مهندسی، دانشگاه بوعلی سینا
Journal Article
2014
08
10
It is known that engineering judgment and design are significantly a function of experimental results. Due to the importance of the experimental results of geotechnical and geo-environmental engineering projects, determination of the reliability of heseexperiments is an important factor in the acceptance of experimental investigation. The error associated with these experiments directly influences the reliability of test results. In spite of the importance of determining errors associated with soil mechanics tests, there has been very limited research towards addressing this subject. In addition, most prior research has focused on distilled water as the pore fluid of the soil. Furthermore, no prior research has addressed the influence of heavy metals on the extent of experimental error in soil mechanics experiments. The main objective of this research is to determine the impact of electrolyte properties of soil on the reliability of results of consolidation and Atterberg limit tests. To achieve this objective, a series of consolidation and Atterberg limit experiments, with tens of replicate samples, was performed. In these experiments, bentonite was mixed with different concentrations of heavy metal (lead nitrate). Then, the coefficient of variation of the results was calculated. The results show that the change in the pore fluid properties of soil causes a change in the properties of the soil double layer, which, consequently, affects the error associated with these experiments. For instance, a 30\% to 85\% change in the COV of the Atterberg limit test and a 4\% to 70\% change in the COV of the consolidation test were observed once the pore fluid properties of the soil are changed. Finally, it is concluded that the presence of contaminant in different concentrations might increase or decrease experimental error. The results of this research can be used to determine the required replicate samples to achieve specific reliability in consolidation and Atterberg limit tests.
با توجه به اهمیت ویژهی نتایج حاصل از آزمایشهای آزمایشگاهی در پروژههای ژئوتکنیکی و ژئوتکنیک زیستمحیطی، تعیین بازهی قابل اعتمادبودن نتایج آزمایشها عامل بسیار مهمی در پذیرش نتایج آزمایشها بهشمار میرود. هدف این پژوهش، تعیین تأثیر تغییر خصوصیات الکترولیت سیال حفرهیی خاک در خطای نتایج آزمایشهای تحکیم و حدود اتربرگ است. بر این اساس، مجموعهیی آزمایش تحکیم و حدود اتربرگ در چند ۱۰ بار تکرار بر روی هر نمونه انجام شده است. در این راستا، نمونههای رسی بنتونیت با غلظتهای مختلفی از آلایندهی فلز سنگین سرب مورد مطالعه قرار گرفته است. نتایج نشان میدهد که تغییر خصوصیات سیال حفرهیی بهواسطهی تغییر خصوصیات لایهی دوگانه، مقدار COV نتایج آزمایشهای حدود اتربرگ را حدود ۳۰ تا ۸۵ درصد و مقدار COV پارامترهای آزمایشهای تحکیم را حدود ۴ تا ۷۰ درصد تغییر میدهد.
https://sjce.journals.sharif.edu/article_1047_ab53312f008159a16f2a530568dcd290.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
SEMI-ACTIVE CONTROL OF VERTICAL VIBRATION OF SUSPENSION BRIDGES SUBJECTED TO EARTHQUAKE EXCITATIONS USING MR DAMPERS AND FUZZY LOGIC
کنترل نیمهفعال ارتعاش قائم پلهای معلق در برابر زلزله با استفاده از میراگرهای مگنتورئولوژیک و منطق فازی
43
54
1046
FA
سعید
پورزینلی
گروه مهندسی عمران ، دانشگاه گیلان
0000-0003-2399-5621
آرش
بهار
گروه مهندسی عمران، دانشگاه گیلان
سولماز
پورزینلی
گروه مهندسی عمران، دانشگاه گیلان
Journal Article
2014
09
06
In this paper, a semi-active control technique is presented to mitigate the seismic vertical response of suspension bridges using magneto-rheological (MR) dampers and fuzzy logic. Fuzzy logic is a kind of controller that can directly determine the input voltage of an MR damper from the responses of the structure, and MR dampers are semi-active control devices which MR fluid is used in their structure. MR dampers have received significant attention in recent years because they retain the reliability of passive control systems and the advantage of adjustable parameter characteristics of an active control system, simultaneously. The magneto rheological damper is an attractive candidate in semi-active control of structures because of its advantageous features including: no need for a major energy source and high power capacity, adjustable power, fast response, and safe operation in cases of power failure.To achieve this goal, a large scale MR damper (2200 KN) is used, and the Vincent-Tomas suspension bridge, located in Los Angeles, USA, has been chosen for the numerical example. Installation of the dampers at degrees along the bridge span, far from the towers, should be highlighted as an extremely challenging problem in this study to increase damper efficiency. In order to solve this problem, use of a rigid truss is proposed, and different schemes are also suggested to install MR dampers along the bridge span. The equation of motion of the system, using generalized modal coordinates, is written in the state-space form and the responses of the bridge are calculated under application of 15 major, world-wide earthquake accelerograms. Different inputs and rule bases are proposed for the fuzzy controller in this research. The characteristics of the fuzzy controller, and the number and position of the dampers are optimized by the trial and error method. Finally, three models with optimal position and number of dampers with optimal fuzzy control parameters are proposed.A comparison between the uncontrolled and controlled responses indicates that the proposed semi-active control technique can effectively suppress the vertical responses of the example bridge.
در این پژوهش، کاهش ارتعاش قائم پلهای معلق با استفاده از میراگرهای نیمه فعال مگنتورئولوژیک و منطق فازی مورد مطالعه قرار گرفته است. برای این منظور، از یک میراگر مگنتورئولوژیک بزرگمقیاس ۲۲۰۰ کیلونیوتنی استفاده و پل معلق وینسنت توماس در آمریکا بهعنوان مثال عددی انتخاب شده است. یکی از مسائل چالشبرانگیز در این پژوهش، نحوهی نصب میراگرها در درجات آزادی دور از پایههای پل، جهت افزایش کارایی میراگرها بوده است؛ که برای حل آن، استفاده از خرپای صلب پیشنهاد شده است. در این پژوهش، ۲ مدل بهینه از نظر تعداد و موقعیت میراگرها ارائه و برای هر مدل نیز ۳ نوع کنترلگر فازی پیشنهاد شده و مطالعات نشان داده است که مدل ۲ با ۸ میراگر با استفاده از کنترلگر فازی نوع یک، که یک ورودی دارد، بهترین عملکرد را در کاهش پاسخهای پل دارد. در ضمن میراگرهای نصبشده قادر به کاهش پاسخ پل در جهت افقی هم هستند.
https://sjce.journals.sharif.edu/article_1046_38c468c8e311504108341655c13a9906.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
EFFECTIVE STRESS LOOSELY COUPLED ANALYSIS OF SAND LIQUEFACTION BASED ON STRAIN ENERGY
تحلیل تنش موثر نیمه وابسته بر مبنای انرژی کرنشی برای مدلسازی روانگرایی ماسهها
55
64
1051
FA
یاسر
جعفریان
پژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله
رضا
محملی ابیانه
دانشکده مهندسی عمران، دانشگاه سمنان
Journal Article
2014
09
15
Nonlinear site response analysis gives a more detailed description of soil behavior than the linear elastic or equivalent linear methods, but application of nonlinear codes in practice has been limited because of its greater number of parameters. In addition, there are some difficulties in calibration and adjustment of parameters in nonlinear codes. There are two main approaches for studying the response of soil deposits subjected to earthquake loading, including total stress and effective stress methods. The major deficiency of the total stress method is that it is unable to take into account the progressive stiffness degradation caused by pore pressure buidup in soil. Only the effective stress method can model the gradual loss of soil strength and stiffness due to the build-up of pore water pressure. In this study, a loosely coupled nonlinear model is presented to predict the undrained behavior of sand subjected to cyclic loading. A modified Kondner - Zelasko (MKZ) model, which is coupled with a pore water pressure generation model based on strain energy, is used for effective stress analysis. There are a couple of methods for the effective stress analysis and modeling of liquefaction, but these methods often require many parameters, and their determination requires greater time and cost. The numerical method presented in this paper is simple and needs a few and determinable parameters. It also provides accurate and acceptable predictions in triaxial condition. Although the proposed model is unable to account for the cyclic mobility and fluctuation of pore water pressure during cyclic loading, it accurately predicts peak points of pore pressure history
during cyclic loading. Modeling of cyclic undrained triaxial tests conducted on Toyoura and Frazer River sands confirms that the proposed approach predicts the onset of liquefaction very well, and it can be used in nonlinear site response analysis to evaluate liquefaction occurrence.
در این مطالعه یک مدل غیرخطی نیمه وابسته بهمنظور پیشبینی رفتار سیکلی زهکشینشده و روانگرایی ماسهها ارائه شده است. از مدل هایپربولیک کندرٓـ زلاسکو اصلاحشده، که به صورت نیمه وابسته با یک مدل پیشبینی کنندهی فشار آب حفرهیی بر مبنای انرژی کرنشی
کار میکند استفاده شده است، تا تحلیل تنش مؤثر انجام شود. اگر چه روشهای بسیار زیادی برای تحلیل تنش مؤثر و مدلسازی روانگرایی در دسترس هستند، اما این روشها غالباً نیازمند پارامترهای بسیاری هستند، که تعیین برخی از آنها نیاز به صرف وقت و هزینهی بسیار دارد. مدل ارائهشده در این نوشتار ساده است و پارامترهای اندک و قابل تعیین دارد و در عین سادگی پیشبینی قابل قبولی را نیز ارائه میکند. نتایج مدلسازی نشان میدهد با وجود اینکه مدل ارائهشده تحرک سیکلی را در نظر نمیگیرد، حد بالای اضافه فشار آب حفرهیی و روانگرایی را به دقت پیشبینی میکند و از آن میتوان در تحلیل یک بُعدی غیرخطی پاسخ زمین بهمنظور ارزیابی رخداد روانگرایی استفاده کرد.
https://sjce.journals.sharif.edu/article_1051_144ad029e84f74ddb4f36289213a96aa.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
EXPERIMENTAL INVESTIGATION ON MUD BRICK WALSL WITH MORTAR CONTAINING STRAW FIBERS UNDER DIAGONAL TENSION
بررسی آزمایشگاهی دیوار خشتی با ملات مسلح شده با کاه تحت کشش قطری
65
73
1057
FA
اصغر
وطنی اسکویی
دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
0000-0001-6489-8508
محمد
افضلی
دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
محمدرضا
مددی پور
دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
علی
بخشی
دانشکده مهندسی عمران، دانشگاه صنعتی شریف
Journal Article
2014
09
16
This study presents an experimental investigation on mud brick walls with mortar containing straw fibers under diagonal axial compression. The brick size was: 22$\times22$$\times7$ cm (face$\times bed$$\times end$).The average compressive strength of the bricks was 4.73 MPa. To determine the performance of straw fibers in the mortar of mud brick wall, 12 walls, with size 120$\times120$$\times22$ cm, with various percentages of straw fibers (0/4, 0/6, 0/8, 1 and 1/2), were nvestigated. or valuation of failure modes in ultimate diagonal compressive load, types of crack, load capacity and ductility, nd nergy bsorption haracteristics, were studied. Cracks in specimens with mortar reinforced by straw fibers have less width than nreinforced mortar. The ultimate load capacities of walls reinforced with various percentages of straw fibers (0/4, 0/6, 0/8, 1 and 1/2), were obtained as 20.3, 21.05, 20.7 and 18.5 kN, respectively. The average load capacitiy was increased about 26.78\% compared to the unreinforced mortar wall in the ultimate load. The result shows that energy absorption in reinforced mortar specimens increased about 94.22 percent. Ultimate displacement for the unreinforced walls was 23.1 and for reinforced walls with 0/8\% straw fiber in mortar was 34.8mm. It shows that ultimate displacement increased about 51 percent. Test results show that straw fibers can be used for reinforcing the mortar of mud brick walls, which is an advantage both economically and in enhancing structural behavior. In this study, when the straw fibers were increased to 0.8 percent in the mortar, the load carrying capacity was increased more than any other percentage of fiber in the mortar.
در این نوشتار عملکرد آزمایشگاهی دیوار خشتی با درصدهای مختلف الیاف کاه در ملات تحت بار استاتیکی قطری مورد بررسی قرار گرفته است. تعداد ۱۲ عدد دیوار با انواع مختلف ملات )ملات معمولی، ملات مسلحشده با درصدهای وزنی: ۰٫۴\٪، ۰٫۶\٪، ۰٫۸\٪، ۱\٪ و ۱٫۲\٪ الیاف کاه( با خشت غیرمسلح در ابعاد $120\times120\times22$ سانتیمتر ساخته شدهاند. دیوارها تحت بار فشاری قطری بارگذاری شدهاند تا نوع ترکها، نیروی نهایی، تغییرشکل نهایی، و جذب انرژی آنها بهدست آید. در دیوارهای با ملات مسلحشده با ۰٫۸\٪ کاه، مقدار نیرو به اندازهی ۲۶٫۷۸\٪ و جذب انرژی دیوارهای مذکور به اندازهی ۹۴٫۲۲\٪ بیشتر از دیوارهای با ملات ساده و غیرمسلح بوده است. نتایج نشان دادهاند که میتوان از افزودنی کاه بهعنوان تسلیحکننده در ملات دیوارهای خشتی استفاده کرد، تا رفتار سازه بهبود بخشیده شود.
https://sjce.journals.sharif.edu/article_1057_100876afe1cc5b38b626916042b044b8.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
RESEARCH INTO THE EFFECT OF SIZE AND SHAPE IN PERFORATED GUSSET PLATES ON SEISMIC BEHAVIOR OF CBFS
بررسی تاثیر ابعاد و شکل صفحه ی اتصال سوراخ دار در عملکرد لرزهیی مهاربند هم گرا
75
83
1058
FA
عبداله
چراغی
گروه مهندسی عمران واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران
سیدمهدی
زهرایی
گروه مهندسی عمران - دانشگاه تهران
Journal Article
2014
10
21
Concentrically braced frames, CBFs, are among common lateral load carrying systems and their relative advantages, such as ease of implementation and lower cost compared to moment resisting frames, has led to their widespread usage. Experiences of past earthquakes indicate that the inherent defects and brittle behavior due to the buckling of compressive braces are the cause of the main damage in structures. In this paper, by making a hole in the gusset plates of diagonal bracing samples, it was endeavored to provide more ductility and improve the seismic performance of CBF through nonlinear static and dynamic analyses using ABAQUS software. For this purpose, holes were designed to have less axial capacity than the brace critical buckling load to help earthquake energy dissipation. The effects of hole shape and dimension and, also, the effect of near and far field earthquakes, were studied. Concentration of inelastic response in the hole neighborhood, results in high energy dissipation and prevents nonlinear behavior in other elements. The hysteresis curves show ductile behavior, enhancing energy dissipation during cyclic loading of the final specimens and postponing the occurrence of buckling in the brace members until lateral displacement at about 2cm. Normal braces buckle in 1cm displacement, leading to brittle behavior. The increase of the frame final displacement between 13-43\% and base shear reduction between 19-37\% demonstrate the superior seismic behavior of the proposed system. Moreover, equivalent damping ratios in the proposed samples are significant by about 20\% The proposed model is relatively easy to implement in a variety of braces, such as X-braces, chevron and diagonal configurations, without too much cost. In this research, by a slight change in the common system and without using complicated devices, energy dissipation is provided. This is one of its distinctive features compared to other research projects.It should be noted that due to the appropriate results obtained in numerical analysis, specimen fabrication and experimental work should be on the agenda to verify the results in the next stage of research.
در این نوشتار با ایجاد سوراخی در صفحهی اتصال چند نمونه مهاربند قطری، سعی در تأمین شکلپذیری و بهبود عملکرد لرزهیی قاب شده و عملکرد نمونهها با انجام تحلیل استاتیکی و دینامیکی غیرخطی با استفاده از نرمافزار اجزاء محدود ABAQUS بررسی شده است. جهت جلوگیری و یا تعویق کمانش در اعضاء مهاربندها، سوراخهایی روی صفحات اتصال به نحوی طراحی شده است که قبل از رسیدن مهاربند به بار بحرانی کمانشی خود، به تسلیم برسد و به جذب و استهلاک انرژی زلزله کمک کند. همچنین تأثیر شکل سوراخها و نیز آثار زلزلهی حوزهی دور و نزدیک نیز مورد ارزیابی قرار گرفته است. نتایج تحلیل، گویای منحنیهای هیسترزیس پایدارتر و استهلاک انرژی بیشتر در نمونههای پیشنهادی است، به طوری که در منحنی رفتاری نمونههای منتخب تا تغییرمکان حدود ۲ سانتیمتر نیز افت عملکردی مشاهده نشده است، اما مهاربند معمولی در تغییرمکان چرخهیی کمتر از ۱ سانتیمتر دچار کمانش شده و افت عملکرد آن مشهود است. همچنین نتایج بهدستآمده از تحلیل تاریخچه زمانی، گویای افزایش تغییرمکان نهایی حدود ۱۳-۴۳ درصدی و کاهش برش پایهی ۱۹-۳۷ درصدی طی بارگذاری لرزهیی است.
https://sjce.journals.sharif.edu/article_1058_81fb643ffa996b8e0b3cb794c3319edf.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
FACTORS EFFECTING THE KINEMATIC BENDING MOMENT IN THE PILES GROUP
عوامل مؤثر در لنگر خمشی سینماتیک در گروه شمعها
85
94
1133
FA
علی
سنایی راد
گروه مهندسی عمران، دانشگاه اراک
احمدرضا
غلامی نژاد
دانشکده عمران، آب و محیط زیست، دانشگاه شهید بهشتی
Journal Article
2015
04
14
Kinematic soil -pile interaction during earthquake motions has received large attention in recent years. In fact, post-earthquake underground field measurement by many researchers proof that bending moments due to kinematic interaction an addition to superstructure inertial effects damaged the pile foundation in recent earthquake. Kinematic forces arise from the passage of seismic waves through the surrounding soil and become significant in the presence of strong discontinuities in stiffness of the soil profile. In this case, the large curvatures imposed to the piles by the vibrating soil in turn generate bending moments; these moments will develop even in the absence of a substructure and are referred to as ``kinematic'' moments, to be distinguished from moments generated by structural loading at the pile head (``inertial'' moments). Kinematic soil - pile interaction is a complex problem involving a number of factors, such as soil profile, soil properties, nonlinear soil behavior, induced pore -pressure and pile properties. Evaluation of the above factors and impact of each on the final response of piles can help engineers to better design. In this paper the results of parametric study of seismic behavior of pile groups embedded in layered soil is evaluated by focusing the attention on the kinematic bending moments induced by the transient motion using the three dimensional finite difference program FLAC3D. Elcentro earthquake excitation that has a low predominant frequency was applied as an acceleration-time history at the base bedrock of the finite difference mesh. Lateral side grids were horizontally fixed for static analysis. In dynamic analyses, lateral boundaries were considered as ``Quite Boundaries'', a built-in boundary condition in FLAC for dynamic analysis. Analysis is carried out by varying the main parameters governing the dynamic response of piles like the soil properties, the diameter, the spacing between pile and the depth of soft soil layer.The results showed that 1) Kinematic bending moment is increased by increasing the diameter of the pile and increasing the depth of soft soil layer or increase the space between the piles enhance the effect of pile diameter on the bending moment; 2) Increase the space between the piles reduce kinematic bending moments; and 3) Increasing the depth of soft soil layer is increase the kinematic bending moment and by increasing the space between the piles effects of soft soil layer depth on bending moment increases slightly.
این نوشتار نتایج مطالعهی پارامتری رفتار لرزهیی گروه شمع مدفون در تودهی خاک لایهیی را ارائه میدهد. هدف از این پژوهش، بررسی
اندرکنش سینماتیک خاکٓـ شمع و چگونگی تأثیر عوامل مختلف در توسعهی لنگرهای خمشی سینماتیک در هنگام زلزله در گروه شمعها بوده است. برای ساخت مدلها از نرمافزار تفاضل محدود سه بُعدی D۳ FLAC استفاده شده است. صحت استاتیکی با مقایسهی مدل با پژوهشهای قبلی و صحت لرزهیی با استفاده از نرمافزار ۲۰۰۰ SHAKE سنجیده شده است. تجزیه و تحلیل لرزهیی پارامتری با تغییر عوامل اصلی و تأثیرگذار در پاسخ گروه شمع مانند: مشخصات خاک، قطر شمعها، فاصلهی شمعها، و عمق لایهی خاک با استفاده از شتابنگاشت زلزلهی السنترو و در حوزهی زمانی انجام شده است. نتایج تجزیه و تحلیلها نشان داده است که عوامل ذکرشده تأثیر زیادی در مقدار لنگر خمشی سینماتیک دارند. همچنین در شمعهای میانی، لنگر خمشی سینماتیک بیشتری نسبت به شمعهای کناری توسعه مییابد.
https://sjce.journals.sharif.edu/article_1133_298b95aa292d276e49087c756905212b.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
استخراج معیار تسلیم مدل تجربی هوک ـ براون تعمیمیافته در فضای نامتغیرهای تنشی: استخراج برخی روابط نظریهی خمیری
95
105
1052
FA
حسن
شرفی
دانشکده ی فنی مهندسی، دانشگاه رازی کرمانشاه
یزدان
شمس ملکی
دانشکده ی فنی مهندسی، دانشگاه رازی کرمانشاه
0000-0001-8796-6016
Journal Article
2014
04
28
In the present paper, derivation of the yield function of the Hoek-Brown model in stress invariant space is investigated. This model is an empirical model that is defined for estimating the bearing capacity of rocks. The main equations of this model, according to principal stresses and in 3D stress space, are defined here . By defining of the model in the stress invariant space, the yield criterion will be independent from the coordinate directions and the rotation of stress axes in general static loadings. By definition of the Lode angle presented in certain papers and books, basically one cannot derive the relationship between the yield function of the model in the principal stress space and stress invariants space. This problem is because of ignoring the 30 degrees difference between the Lodes angle and the used angle in the definition of the models. After definition of the yield function, the plastic potential function of the model is also investigated. In this study, Hessian matrices are obtained by means of the chain rule in differentiating stress invariants. Basically, any arbitrary constitutive model that is expressed by principal stresses can transform to the stress invariant space via the basic relationships presented here. After this step, by computation of the elasto-plastic constitutive matrix, we can estimate the stress-strain behavior of material using that arbitrary constitutive model. This paper focuses on the elasto-plastic behavior and corresponding elasto-plastic relationships of the Hoek-Brown generalized criterion in three dimensional principal stress space and introduces a simple way to convert these relationships to three dimensional stress invariant space.
در این نوشتار، به استخراج تابع تسلیم مدل هوکٓـ براون در فضای نامتغیرهای تنشی پرداخته شده است. معیار مذکور از نوع تجربی است، که به منظور برآورد رفتار باربری سنگها تعریف شده است. رابطهی اصلی مدل هوکٓـ براون بر حسب تنشهای اصلی و در فضای تنش سهبُعدی تعریف شده است. با تعریف تابع تسلیم مدل در فضای نامتغیرهای تنشی، تابع مذکور مستقل از جهت و نیز دوران محورهای تنش در عموم بارگذاریهای استاتیکی میشود. با تعریفی که از زاویهی لاد در برخی از نوشتارها آمده است، اصولاً نمیتوان رابطهی مابین تابع تسلیم مدل در فضای تنشهای اصلی و در فضای نامتغیرهای تنشی را استخراج کرد. عمده مشکل موجود در این زمینه به دلیل درنظرگرفتن اختلاف ۳۰ درجهیی مابین زاویهی لاد و زاویهی بهکار برده شده در تعریف مدل رفتاری است. پس از تعریف تابع تسلیم، تابع پتانسیل خمیری مدل نیز مورد بررسی قرار گرفته است. ماتریسهای هسیان، که به کمک قواعد مشتقگیری زنجیری از نامتغیرهای تنشی بهدست آمدهاند، در این پژوهش محاسبه شدهاند. اصولاً هر مدل رفتاری دلخواهی که براساس تنشهای اصلی بیان شود، میتواند مطابق روابط مبنایی موجود در این پژوهش، به فضای نامتغیرهای تنشی منتقل شود. پس از این مرحله میتوان با محاسبهی ماتریس رفتاری کشسانخمیری
قادر به برآورد رفتار تنشٓـ کرنش کشسانخمیری مصالح به کمک آن مدل رفتاری دلخواه بود.
https://sjce.journals.sharif.edu/article_1052_ad8841d68cc50aa736a37b5eb92bffd7.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
EFFECTS OF SOIL-ATMOSPHERE INTERACTION ON THE PHREATIC SURFACE AND STABILITY OF TAILING DAMS (CASE STUDY: SARCHESHMEH TAILING DAM)
اثرات اندرکنش خاک ـ اتمسفر در محل قرارگیری خط فریاتیک و پایداری سدهای باطله (مطالعهی موردی: سد باطلهی مس سرچشمه)
107
115
1049
FA
علی
پاک
دانشکده مهندسی عمران، دانشگاه صنعتی شریف
0000-0001-8139-2488
نیکو
عظیمی حسنی
دانشکده مهندسی عمران، دانشگاه صنعتی شریف
Journal Article
2014
07
16
Positioning of the phreatic \ surface in a dam \ body \ plays a critical \ role in the stability \ of tailing \ dams. Soil-atmosphere interaction effects, such as precipitation, runoff, interception, infiltration, and evaporation, on the one hand, and unsaturated soil effects, such as capillary rise, on the other, cause significant changes in the situation of the phreatic surface.In this paper, first, different mechanisms that affect the phreatic line level in the tailing dams and their corresponding equations are studied, and a computer program is developed for calculating the fluctuations of the phreatic line. Then, for evaluating the usefulness of the program in real time problems, the stability of ``Sarcheshmeh'' copper mine tailing dam in Rafsanjan city, Iran, has been studied. Plaxis software Ver.8.0 has been used for modeling this tailing dam. Necessary parameters for modeling this dam have been obtained from the results of different laboratory tests on tailing materials, and information available from synoptic stations of the meteorological organization of Iran in the area. After determining the amount of change in the phreatic level for a special period of time, the stability of the dam was studied, based on calculating the factor of safety under different conditions.The results show that by constructing new dikes, the safety factor decreases. Also, the results show that those parameters that increase the phreatic level reduce the safety factor, and the stability of the tailing dam will be threatened. Among different parameters affecting the phreatic level, capillary rise was found to be the most significant factor in regard to tailing dam stability when constructed in arid areas.
این نوشتار به بررسی پایداری سازههای خاکی تحت تأثیر اثرات اندرکنش خاکٓـ اتمسفر میپردازد. اندرکنش خاکٓـ اتمسفر در قالب پدیدههای مختلف بر محل سطح فریاتیک در بدنهی سازههای خاکی نظیر سدهای باطله و وضعیت پایداری آنها تأثیر میگذارد. در این پژوهش، پس از شناسایی مکانیزمها و استخراج روابط حاکم بر آنها، تغییرات تراز خط فریاتیک در بدنهی سازههای خاکی تعیین و پایداری این سازهها مورد بررسی قرار گرفته است. نتایج بهدستآمده نشان میدهد هر چه عوامل اتمسفریک به تغییر بیشتری در محل خط فریاتیک منجر شوند، وضعیت پایداری سازه بیشتر دستخوش تغییر خواهد شد. در میان عوامل مطالعهشده در این پژوهش، میزان تأثیر پدیدههای موئینگی و تبخیر در پایداری بیشتر بوده است. در انتهای نوشتار، تأثیر شرایط اتمسفریک و اندرکنش خاکٓـ اتمسفر در پایداری سد باطلهی معدن مس سرچشمهی کرمان مورد بررسی قرار گرفته است.
https://sjce.journals.sharif.edu/article_1049_4d15a32705c16733a446a28d776578bf.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
OPTIMUM DISTRIBUTION OF TADAS DAMPERS FOR IMPROVING THE SEISMIC PERFORMANCE OF
MOMENT FRAMES
توزیع بهینه ی میراگرهای مثلثی شکل افزاینده ی سختی و میرایی جهت بهبود عملکرد لرزهیی قابهای خمشی
117
123
1054
FA
رضا
کرمی محمدی
دانشکده مهندسی عمران، دانشگاه صنعتی خواجهنصیرالدین طوسی
محمدرضا
گروسی
دانشکده مهندسی عمران، دانشگاه صنعتی خواجهنصیرالدین
Journal Article
2014
08
09
Different passive dampers have been presented in order to improve structural performance, and various investigations have been undertaken to find their optimum distribution by different methods. In this paper, optimal distribution of TADAS dampers to improve the performance of a 3-story steel moment frame is investigated. This frame has the same loading condition, mass, geometry, and beam and column material, as the moment resisting frame of a 3-story SAC building located in Los Angeles. The design of the members of the frame does not satisfy ASCE41-06 criteria. A nonlinear static procedure, according to ASCE41-06 instruction, is used to analyze the frame under seismic load.Based on the concept of the uniform distribution of deformation (UDD) algorithm, in order to obtain optimal design, structural resistance elements should be transferred from strong to weak portions. In this study, a modified UDD algorithm is used to achieve optimal distribution of dampers. This algorithm acquires the optimal stiffness distribution of TADAS dampers, with respect to the demand to capacity ratio (DCR) of the stories. The DCR of each story is equal to the maximum DCR of elements in that story, which is calculated based on ASCE41-06 regulations. First, the proposed algorithm assigns minimum stiffness to all dampers, then, increases TADAS stiffness in stories that have DCR greater than the allowable value, and vice versa. This process continues until uniform distribution for the stories DCR is achieved.Genetic and PSO algorithms are types of heuristic algorithms. Optimal distribution of dampers using these algorithms is also obtained and their
results compare with the UDD algorithm. Heuristic methods utilize a stochastic search to find optimum solution. First, they generate a population of solutions, then, find proper solutions, with regard to the objective function, and in the next steps, attempt to produce better population. Finally, they converge to the optimum design.The results show that the optimum stiffness distribution of TADAS dampers is obtained when the distribution of stories DCR becomes uniform. Also, the UDD alogorithm acquires optimum distribution of dampers in fewer numbers of analyses in comparison with heuristic methods, because this algorithm uses engineering intelligence instead of stochastic search to find an optimum solution.
در این نوشتار دستیابی به توزیع بهینهی سختی میراگرهای افزایندهی سختی و میرایی (TADAS)، جهت بهبود عملکرد یک قاب ۳ طبقه با استفاده از الگوریتمهای بهینهیابی ژنتیک و تودهی ذرات انجام شده است. همچنین با ایجاد تغییراتی در الگوریتم تغییرشکل یکنواخت، توزیع بهینهی میراگرها با استفاده از الگوریتم مذکور بهدستآمده و نتایج آن با دو الگوریتم دیگر مقایسه شده است. معیار ارزیابی عملکرد سازه نسبت تقاضا به ظرفیت اعضاست، که مطابق با آییننامهی ۰۶-۴۱ASCE محاسبه شده است. نتایج نشان میدهد الگوریتم تغییرشکل یکنواخت با انجام تحلیلهای بسیار کمتری نسبت به دو الگوریتم دیگر به توزیع بهینهی سختی میراگرهای TADAS در ارتفاع قاب دست پیدا میکند و هر چه نسبت تقاضا به ظرفیت طبقه یکنواختتر شود، طرح مناسبتری بهدست میآید.
https://sjce.journals.sharif.edu/article_1054_aa9467f9d164aacd43d47a7dc17a0a25.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
NUMERICAL INVESTIGATION OF SAND EMBANKMENT STABILITY OVER SOFT CLAYS RETROFITTED WITH STONE COLUMNS
بررسی عددی پایداری شیروانی ماسهیی روی رس نرم بهسازی شده با ستون سنگی
125
132
1055
FA
محمدجواد
شعبانی رمنتی
دانشکده مهندسی عمران، دانشگاه صنعتی اصفهان
محمدعلی
روشن ضمیر
دانشکده مهندسی عمران، دانشگاه صنعتی اصفهان
Journal Article
2014
11
05
Various techniques have been adopted to enhance the stability of embankments constructed over soft soils. One of the most appropriate methods for this purpose is the application of stone columns. In this study, finite element analyses were carried out using PLAXIS 2D to consider the stability of sandy embankments over a soft clay bed reinforced with stone columns. To estimate the factor of safety (FS) against the deep-seated failure of the embankments, both common approaches of equivalent strip and equivalent area methods were used as a comparative investigation. The numerical analyses were focused on the effects of parameters on embankment stability, such as the diameter as well as the spacing of stone columns, the friction angle of the stone columns, the cohesion of the clay bed, slope height and friction angle. The analyses results show that the enhancement values of the embankment safety factor, due to an increase in the stone friction angle and the cohesive strength of the clay, were more pronounced in comparison to the effects of other parameters. Thus, an increase of 12kPa in the cohesive strength of the clay bed caused 34.2\% and 15.8\% enhancement in the safety factor of the embankment, respectively, through the equivalent strip and area methods. As modeling equivalent strips is a tedious task, especially when the number of columns is high, eotechnical designers prefer to use the equivalent area method. Hence, a reduction factor was proposed here to apply to the safety factor of the equivalent area method. The analyses results show that the reduction factor varies between 0.74 and 0.99. The FS values btained from the equivalent area method may be adjusted using such reduction factors.
در این پژوهش با استفاده از نرمافزار Plaxis، پایداری شیروانی ماسهیی ساختهشده روی رس نرم مسلح به ستون سنگی به دو روش نوار معادل و ناحیهی معادل بررسی شده است. با انجام تحلیلهای عددی اثر پارامترهایی نظیر: قطر، زاویهی اصطکاک و فاصلهی بین ستون سنگی، چسبندگی خاک رسی، ارتفاع و زاویهی اصطکاک خاکریز در ضریب اطمینان شیروانی ماسهیی مورد بررسی قرار گرفتهاند. نتایج حاصل نشان داده است که از بین پارامترهای مورد بررسی، مقاومت ستون سنگی و رس نرم در ضریب اطمینان پایداری تأثیر بیشتری دارند. همچنین بر مبنای نتایج عددی و با توجه به متداولبودن روش طراحی ناحیهی معادل نسبت به نوار معادل و برای تعدیل تفاوت موجود بین نتایج حاصل از روشهای مذکور، یک ضریب کاهش پیشنهاد شده است که برای کل پارامترهای بررسیشده در محدودهی ۰٫۷۴ تا ۰٫۹۹ قرار گرفته است. توصیه میشود که ضریب اطمینان حاصل از روش ناحیهی معادل با ضریب کاهش ذکرشده تعدیل یابد.
https://sjce.journals.sharif.edu/article_1055_251c36953fafecb2742e8e927818d9d1.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
THE ASSESSMENT INTERRELATIONSHIP BETWEEN FAR-FIELD AND NEAR-FIELD SEISMIC PARAMETERS USING THE CORRELATION CONCEPT
ارزیابی رابطهی بین پارامترهای لرزهای حوزه های دور و نزدیک گسل با استفاده از مفهوم همبستگی
133
144
1059
FA
علیرضا
حبیبی
دانشکده مهندسی عمران، دانشگاه کردستان
احسان
جامی
دانشکده مهندسی عمران، دانشگاه کردستان
سجاد
رستمی
دانشکده مهندسی عمران، دانشگاه کردستان
Journal Article
2014
11
19
Ground motions consequent to an earthquake reflect the features of the seismic source, the rupture process, the source-site travel path, and local site conditions. Consequently, the characteristics of ground motion in the vicinity of an active fault can be significantly different from those of the far-field. Recordings from recent earthquakes show that near-field earthquakes have different characteristics than far-field earthquakes. Overall, these characteristics are caused by a directivity effect in near-field earthquakes. This phenomenon causes the fault normal component of the recorded near-fault to have long-period velocity pulses. This paper investigates the relationship between the near-field of seismic parameters, including range, energy and frequency content parameters, and the results are compared with far-field earthquakes. 30 records of far and near-field earthquakes have been used. The data were analyzed by the Pearson correlation coefficient. It is a measure of the linear correlation (dependence) between two variables, X and Y, giving a value between +1 and -1 inclusive, where 1 is total positive correlation, 0 is no correlation, and -1 is total negative correlation. The results show that the correlation between the parameters of the horizontal component of near-field not only has a direct relationship, but that the correlations, on average, are powerful. The results show that maximum velocity of ground motion is better than maximum acceleration in prediction of other seismic parameters in three-components. On the other hand, the relationships between horizontal and vertical components of the parameters of the near-field differ onsiderably. So, in the horizontal component, no inverse relationship is seen between the parameters.
رکوردهای ثبتشده از زمینلرزههای اخیر نشان میدهد که حرکات نزدیک گسل، ویژگیهای متفاوتی نسبت به زلزلههای حوزهی دور دارند. در مجموع بیشتر این ویژگیها، در اثر پدیدهی مهم راستاپذیری پیشرونده در زلزلههای حوزهی نزدیک است. این پدیده باعث میشود مؤلفهی عمود بر گسل نگاشتهای ثبتشده در نزدیک گسل، پالسهایی با دورهی تناوب بلند در نگاشت سرعت دارند.در این نوشتار به بررسی رابطهی بین پارامترهای لرزهیی حوزهی نزدیک از جمله پارامترهای دامنهیی، انرژی، و محتوای بسامدی پرداخته و نتایج با زلزلههای حوزهی دور مقایسه شدهاند. به این منظور از ۳۰ شتابنگاشت واقعی برای حرکات دور و نزدیک گسل استفاده شده است. پس از پردازش دادهها نتایج نشان داده است که همبستگی بین پارامترهای مؤلفهی افقی حرکات نزدیک گسل نه فقط رابطهی مستقیمی دارند، بلکه میزان همبستگیها نیز به طور میانگین قوی هستند. از طرف دیگر، رابطهی بین پارامترهای مؤلفههای افقی و قائم حرکات نزدیک گسل بهصورت قابل توجهی با هم اختلاف دارند، به طوری که در مؤلفهی افقی هیچگونه رابطهی معکوسی بین پارامترها مشاهده نشده است.
https://sjce.journals.sharif.edu/article_1059_5e8ffa1b8a0593bb49a2870ed3a3d49e.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
-
چکیده انگلیسی مقالات پاییز 95، شماره 3/2
148
156
1316
FA
Journal Article
2016
12
20
-
-
https://sjce.journals.sharif.edu/article_1316_02abe2fb5431871a3a35035c4b9b1ecb.pdf
دانشگاه صنعتی شریف
مجله ی مهندسی عمران شریف
2676-4768
32.2
3.2
2016
11
21
-
فهرست انگلیسی مقالات پاییز 95، شماره 3/2
157
158
1317
FA
Journal Article
2016
12
20
-
-
https://sjce.journals.sharif.edu/article_1317_df8648fc735791012a1848042a572a03.pdf