\شماره٪٪۱
Eduardo, C. and Ribeiro, G. ``Influence of compaction pressure and particle
content on thermal and mechanical behavior of artificial marbles with marble
waste and unsaturated polyester'',
{\it Material Research}, {\bf 18}(2), pp. 283-290 (2015).
\شماره٪٪۲
Yousefieh, N., Joshaghani, A. and Hajibandeh, E. ``Influence of fibers on
drying shrinkage in restrained concrete'',
{\it Construction and Building Material},
{\bf 148}, pp. 833-845 (2017).
\شماره٪٪۳
Li, L.G. and Kwan, A.K.H. ``Adding limestone fines as cementitious paste
replacement to improve tensile strength, stiffness and durability of
concrete'', {\it Cement and Concrete Composition}, {\bf 60}, pp. 17-24 (2015).
\شماره٪٪۴
Gao, Y., Romero, P., Zhang, H. and et al. ``Unsaturated
polyester resin concrete: A review'', {\it
Construction and Building Materials}, {\bf 228},
pp. 1-18 (2019).
\شماره٪٪۵
Hashmpour, M. and Heidari, A. ``Investigation of mechanical properties of
self-compacting polymeric concrete with backpropagation network'',
{\it International Journal of Engineering}, {\bf 31}(6), pp. 903-909 (2018).
\شماره٪٪۶
Moradikhou, A.B., Esparham, A. and Jamshidi Avanaki, M. ``Effect of hybrid
fibers on water absorption and mechanical strengths of geopolymer concrete
based on blast furnace slag'', {\it Civil Engineering and Materials
Application}, {\bf 3}(4), pp. 193-201 (2019).
\شماره٪٪۷
Carvalho E.A.S., Vilela, N.D.F., Monteiro, S.N. and et al.
``Novel artificial ornamental stone developed with quarry waste in epoxy
composite'', {\it Materials Research}, {\bf 21}(1), pp. (2018).
\شماره٪٪۸
Sepahvand, Z. and Barani, K. ``Production of artificial stone from dimension
stone waste'', {\it Amirkabir Journal of Civil Engineerig},
{\bf 50}(3), pp. 453
-460 (2018).
\شماره٪٪۹
Stfanidou M., Pachta V. and Papayianni I. ``Design and testing of artificial
stone for the restoration of stone elements in monuments and historic
buildings'', {\it Construction and Building Materials},
{\bf 93}, pp. 957-965 (2015).
\شماره٪٪۱۰
Heidari, A., Hashempour, M. and Tavakoli, D. ``Use of waste materials in
concrete: A review'',
{\it Journal of Science and Technology}, {\bf 26}(2), pp. 499-522
(2018).
\شماره٪٪۱۱
Heidari, A. and Tavakoli, D. ``A study of the mechanical properties of
ground ceramic powder concrete incorporating nano-SiO2 particles'',
{\it Construction and Building Materials}, {\bf 38}, pp. 255-264 (2013).
\شماره٪٪۱۲
Heidari, A., Hashempour, M., Javdanian, H. and et al. ``Investigation
of mechanical properties of mortar with mixed recycled aggregates'', {\it
Asian
Journal of Civil Engineering}, {\bf 19}(5), pp. 583-593 (2018).
\شماره٪٪۱۳
Heidari, A., Hashempour, M. and Tavakoli, D. ``Using of Backpropagation
neural network in estimation of compressive strength of waste concrete'',
{\it Soft
Computing in Civil Engineering}, {\bf 1}(1), pp. 54-64 (2017).
\شماره٪٪۱۴
Lee, M., Ko, Ch., Chang, F. and et al.
``Artificial stone slab production using waste glass, stone fragments and
vacuum vibratory compaction'', {\it
Cement and Concrete Composites}, {\bf 30}(7), pp.
583-587 (2008).
\شماره٪٪۱۵
Peng, L. and Qin, Sh. ``Mechanical behaviour and microstructure of an
artificial stone slab prepared using a SiO2 waste crucible and quartz sand'',
{\it Construction and Building Materials}, {\bf 171}, pp. 273-280 (2018).
\شماره٪٪۱۶
Shishegaran, A., Saeedi, M., Mirvaland, S. and et al. ``The
mechanical strength of the artificial stones, containing the travertine wastes
and sand'', {\it Materials Research and Technology},
{\bf 11}, pp. 1688-1709 (2021).
\شماره٪٪۱۷
Sarami, N. and Mahdavian, L. ``Comparison of artifical stone made frome sludge
stone with tranertine stone waste of stone cutting factory'',
{\it Engineering Research
in Africa}, {\bf 23}, pp. 64-71 (2015).
\شماره٪٪۱۸
Gomes, M., Carvalho, E., Sobrinho, S. and et al.
``Production and characterization of a novel artificial stone using brick
residue and quarry dust in epoxy matrix'',
{\it Material Research and Technology},
{\bf 7}(4), pp. 492-498 (2018).
٪\شماره٪٪۱۹
٪Keinanen, K. and Wigington, G.
٪ ``Unsaturated polyester resins'', United State
٪ Patent, US6268464B1 (2001).
٪\شماره٪٪۲۰
٪Ardhyananta1, H., Puspadewa1, F.D., Wicaksono1, S.T. and et al.
٪ ``Mechanical and
٪thermal properties of unsaturated polyester/vinyl ester blends cured at room
٪temperature'', {\it 4th International Conference Chain-Growth Approach to
٪Unsaturated Polyesters}, American Chemical Society, 133, pp. 10724-10727
٪(2011).
\شماره٪٪۲۱
DiCiccio, A.M. and Coates, G.W. ``Ring-opening copolymerization of maleic
anhydride with epoxides'', Advanced Materials Science and Technology
(2017).
\شماره٪٪۲۲
American Society for Testing and Materials (ASTM), ``Standard test method
for tensile properties of plastics'', ASTM D 638 (2014).
\شماره٪٪۲۳
American Society for Testing and Materials (ASTM), ``Standard test methods
for flexural properties of unreinforced and reinforced plastics and electrical
insulating materials'', ASTM D 790 (2003).
\شماره٪٪۲۴
American Society for Testing and Materials (ASTM), ``Standard test method
for linear shrinkage of cured thermosetting casting resins during cure'', ASTM
D2566 (1993).
\شماره٪٪۲۵
American Society for Testing and Materials (ASTM), ``Standard test method
for indentation hardness of rigid plastics'', ASTM D2583 (1995).
\شماره٪٪۲۶
American Society for Testing and Materials (ASTM),`` Standard test method
for deflection temperature of plastics under flexural load in the edgewise
position'', ASTM D648 (2018).
\شماره٪٪۲۷
American Society for Testing and Materials (ASTM), ``Standard test
)
