\شماره٪٪۱
Lotfollahi, M. and Mofid, M. ``Innovative method in seismic
design of slab-on-girder steel bridges'', {\it Constructional Steel
Research}, {\bf 64}(12), pp. 1420-1435 (2008).
\شماره٪٪۲
Hsu, H.L., Juang, J.L. and Chou, C.H. ``Experimental evaluation
on the seismic performance of steel knee braced frame structures
with energy dissipation mechanism'', {\it Steel and Composite Structures},
{\bf 11}(1), pp. 77-91 (1979).
\شماره٪٪۳
Murthy, A.N.C.K. ``Application of visco-hyperelastic devices
in structural response control'', {\it The degree of Master of Science,
Civil Engineering Department, Blacksburg Polytechnic Institute,
Virginia Polytechnic Institute and State University, Blacksburg},
VA, USA (2005).
\شماره٪٪۴
Marshall, J.D. and Charney, F.A. ``A hybrid passive control
device for steel structures, I: Development and analysis'', {\it Constructional
Steel Research}, {\bf 66}(10), pp. 1278-1286 (2010a).
\شماره٪٪۵
Marshall, J.D. and Charney, F.A. ``A hybrid passive control
device for steel structures, II: Physical testing'', {\it Constructional
Steel Reseach}, {\bf 66}(10), pp. 1287-1294 (2010b).
\شماره٪٪۶
Moghaddam, H. and Estekanchi, H. ``On the characteristics
of off-centre bracing system'', {\it Constructional Steel Research},
{\bf 35}(3), pp. 361-376 (1995).
\شماره٪٪۷
Amadio, C., Clemente, I., Macorini, L. and et al.
``Seismic behaviour of hybrid systems made of PR composite frames
coupled with dissipative bracings'', {\it Earthquake Engineering} \&
{\it Structural Dynamics}, {\bf 37}(6), pp. 861-879 (2008).
\شماره٪٪۸
Annan, C.D., Youssef, M.A. and El Naggar, M.H. ``Experimental
evaluation of the seismic performance of modular steel-braced
frames'', {\it Engineering Structures}, {\bf 31}(7), pp. 1435-1446 (2009).
\شماره٪٪۹
Afsar Dizaj, E., Fanaie, N. and Zarifpour, A. ``Probabilistic
seismic demand assessment of steel frames braced with reduced
yielding segment buckling restrained braces'', {\it Advances in Structural
Engineering}, {\bf 21}(7), pp. 1002-1020 (2018).
\شماره٪٪۱۰
Fanaei, N. and Dizaj, E. ``Response modification factor of
the frames braced with reduced yielding segment BRB'', {\it Structural
Engineering and Mechanics}, {\bf 50}(1), pp. 001-017 (2014).
\شماره٪٪۱۱
Kelly, J.M., Slinner, R.I. and Heine, A.J. ``Mechanisms
of energy absorption in special devices for use in earthquake
resistant structures'', {\it Bulletin of New Zealand National Society
for Earthquake Engineering}, {\bf 5}(3), pp. 63-88 (1972).
\شماره٪٪۱۲
Slinner, R.I., Kelly, J.M. and Heine, A.J. ``Hysteresis dampers
for earthquake resistant structures'', {\it Earthquake Engineering
and Structure Dynamic}, {\bf 3}(3), pp. 287-296 (1974).
\شماره٪٪۱۳
Chan, W.K. and Albermani, F. ``Experimental study of steel
slit damper for passive energy dissipation'', {\it Engineering Structures},
{\bf 30}(4), pp. 1058-1066 (2008).
\شماره٪٪۱۴
Kafi, M.A. ``Analytical and experimental study of effect
of steel ring on ductility of concentric braces'', {\it The degree
of Doctorate of Philosophy, Civil Engineering Department, Iran
University of Science and Technology}, Tehran, Iran (2008).
\شماره٪٪۱۵
Rakicevic, Z. and Jurukovshi, D. ``Behavior factor (q-factor)
for non-standard dual steel frame structures'', {\it 11th European
Conference on Earthquake Engineering} (1998).
\شماره٪٪۱۶
Roufegarinejad, A. and Sabouri, S. ``Nonlinear behavior of
yielding damped bracing frames'', {\it 15th ASCE Engineering Mechanics
Conference}, Columbia University, New York (2002).
\شماره٪٪۱۷
Motamedi, M., Hafezi, M. and Yekrangnia, M. ``Analytical
study of steel ring connections as hysteretic metallic damper'',
15 WCEE (2012).
\شماره٪٪۱۸
Peng, X.T., Lin, C., Cao, Y.M. and et al. ``Seismic behaviors
of the composite central brace with steel ring damper'', {\it 7th International
Conference on Energy and Environmental Protection} (ICEEP 2018),
pp. 1089-1092 (2018).
\شماره٪٪۱۹
Bazzaz, M., Kheyroddin, A., Kafi, M.A. and et al. ``Evaluation
of the seismic performance of off-centre bracing system with
ductile element in steel frames'', {\it Steel and Composite Structures},
{\bf 12}(5), pp. 1-20 (2012).
\شماره٪٪۲۰
Andalib, Z., Kafi, M.A., Kheyroddin, A. and et al. ``Experimental
investigation of the ductility and performance of steel rings
constructed from plates'', {\it Journal of Constructional Steel Research},
{\bf 103}, pp. 77-88 (2014).
\شماره٪٪۲۱
Bazzaz, M., Kheyroddin, A., Kafi, M.A. and et al.
``Evaluating the seismic performance of off-centre bracing
system with circular element in optimum place'', {\it International
Journal of Steel Structures}, {\bf 14}(2), pp.1-12 (2014).
\شماره٪٪۲۲
Bazzaz, M., Andalib, Z., Kafi, M.A. and et al. ``Evaluating
the performance of OBS-C-O in steel frames under monotonic load'',
{\it Earthquakes and Structures}, {\bf 8}(3), pp. 697-710 (2015).
\شماره٪٪۲۳
Bazzaz, M., Andalib, Z., Kheyroddin, A. and et al.``Numerical
comparison of the seismic performance of steel rings in off-centre
bracing system and diagonal bracing system'', {\it Steel and Composite
Structures}, {\bf 19}(4), pp. 917-937 (2015).
\شماره٪٪۲۴
Gao, N., Jeon, J.S., Hodgson, D.E. and et al. ``An
innovative seismic bracing system based on a superelastic shape
memory alloy ring'', {\it Smart Materials and Structures}, {\bf 25}(5), pp.
1-16 (2016).
\شماره٪٪۲۵
Andalib, Z., Kafi, M.A., Bazzaz, M. and et al.
``Numerical evaluation of ductility and energy absorption of
steel rings constructed from plates'', {\it Engineering Structures},
{\bf 169}, pp. 94-106 (2018).
\شماره٪٪۲۶
Peng, X., Lin, C., Cao, Y. and et al.``Nonlinear finite
element simulation on seismic behaviour of steel frame-central
brace with ring damper'', {\it IOP Conf. Series: Materials Science
and Engineering}, {\bf 472}(1), 012031, pp.1-10 (2019).
\شماره٪٪۲۷
Kheyroddin, A., Sepahrad, R., Saljoughian, M. and et al.
``Experimental evaluation of RC frames retrofitted by steel jacket,
X-brace and X-brace having ductile ring as a structural fuse'',
{\it Journal of Building Pathology and Rehabilitation}, {\bf 4}(11) (2019).
\شماره٪٪۲۸
AISC, ``Prequalified connections for special and intermediate
steel moment frames for seismic application'', Chicago, USA (2016).
\شماره٪٪۲۹
Applied Technology Council, ``Guidelines for seismic testing
of components of steel structures'', {\it Report of ATC-24, Redwood
City}, CA, USA (1992).
\شماره٪٪۳۰
Naghavi, M., Rahnavard, R., Thomas, R.J. and et al.
``Numerical evaluation of the hysteretic behavior of concentrically
braced frames and buckling restrained brace frame systems'', {\it Journal
of Building Engineering}, {\bf 22}, pp. 415-428 (2019).
\شماره٪٪۳۱
AISC, ``Seismic provisions for structural steel buildings'',
Chicago, USA (2005).
\شماره٪٪۳۲
Mirtaheri, M., Gheidi, A., Zandi, A.P. and et al.
``Experimental optimization studies on steel
core lengths in buckling restrained braces'', {\it Journal of Constructional
Steel Research}, {\bf 67}(8), pp. 1244-1253 (2011).
\شماره۵٪۳۳
Jia, M., Lu, D., Guo, L. and et al. ``Experimental research
and cyclic behavior of buckling-restrained braced composite frame'',
{\it Journal of Constructional Steel Research}, {\bf 95}, pp. 90-105 (2014).
\شماره٪٪۳۴
Berman, Je.W. and Bruneau, M. ``Experimental and analytical
investigation of tubular links for eccentrically braced frames'',
{\it Eng
)