Aalipour, P. Feasibility study on promoting the value of large-scale construction projects using the combination of value engineering and the ANFIS method [38.2, 4.1, 2023, Pages 13-22]
Abdeh Keykha, H. Numerical investigation of the anisotropic behavior of the sand in drained condition [38.2, 1.1, 2022, Pages 3-14]
Abdoos, H. Effective width estimation of L-shaped RC shear walls using EPR algorithm [38.2, 4.2, 2023, Pages 63-71]
Abrishami, S. Seismic Control of Benchmark Highway Bridge Using Semi-active Control System and Self-Tuning Fuzzy Controller [38.2, 4.1, 2023, Pages 73-84]
Adabi, M. Investigation of effect of size and content of nano/SiO2 on the strength and durability of RCC in freezing-thawing cycles [38.2, 1.2, 2022, Pages 145-154]
Ahmadi Chenarboni, H. The effect of cement and zeolite on undrained shear strength of the expansive clay [38.2, 3.2, 2022, Pages 11-20]
Akbari, M. Development of the integrated MARS-PSO and ELM-PSO models for estimating the compressive strength of concrete in circular concrete columns confined with FRP polymer fibers [38.2, 2.1, 2022, Pages 117-129]
Akbari, M. Evaluation of Linear Static Approach in Performance-Based Design of Steel Bending Frames [38.2, 3.2, 2022, Pages 67-77]
Akbari Garakani, A. Optimization of critical slip surface in unsaturated slopes subjected to rain infiltration by CBO algorithm [38.2, 2.1, 2022, Pages 51-61]
Akbarzadeh Totonchi, M. R. Seismic Control of Benchmark Highway Bridge Using Semi-active Control System and Self-Tuning Fuzzy Controller [38.2, 4.1, 2023, Pages 73-84]
Amanat, Sh. Investigation of periodic resonators as wave barriers for mitigating surface seismic waves using Bloch-Floquet theory [38.2, 4.1, 2023, Pages 53-60]
Aminraya, M. Evaluation of textile concrete behavior in the accelerated shelter [38.2, 3.1, 2022, Pages 15-25]
Amiri, M.M. Investigation of effect of size and content of nano/SiO2 on the strength and durability of RCC in freezing-thawing cycles [38.2, 1.2, 2022, Pages 145-154]
Amiri hanza, F. Evaluation of textile concrete behavior in the accelerated shelter [38.2, 3.1, 2022, Pages 15-25]
Ansari, M. Extending a model of loss seismic risk resulting from production interrupt at gas refinery units (case study: Parsian Gas Refinery) [38.2, 3.2, 2022, Pages 33-41]
Arabzade, A. Evaluation of behavior of reinforced concrete shear wall with irregular opening due to near-fault earthquake [38.2, 2.2, 2022, Pages 29-41]
Arbabi, H. The Effect of Knowledge Management Infrastructure through Knowledge Management Processes on the Performance of Temporary Teams in the Project [38.2, 4.1, 2023, Pages 85-96]
Ardakani, A.R. Evaluation of interface shear strength properties of geosynthetic with Recycled concrete and Asphalt waste by direct shear test [38.2, 2.1, 2022, Pages 27-47]
Ardakani, A.R. Evaluation of the static and multistage geocell pullout behavior in coarse grained soil [38.2, 2.2, 2022, Pages 121-130]
Ardeshir-Behrestaghi, A. Static analysis of axisymmetric 3-D layered transversely isotropic thick cylindrical shells by displacement potential function [38.2, 3.1, 2022, Pages 3-14]
Armanpour, A.H. Investigation of effect of size and content of nano/SiO2 on the strength and durability of RCC in freezing-thawing cycles [38.2, 1.2, 2022, Pages 145-154]
Asadi, P. Coupled effect of loading rate and notch length on tensile strength of rock [38.2, 2.1, 2022, Pages 87-98]
Azadi, M. Investigation of the effect of descending injection on the formation of calcite crystals in bio-cementation of sandy soils [38.2, 1.1, 2022, Pages 87-98]
Babaee, R. Development of the Multiquadric mesh-less method for analyzing the dynamic interaction of dam-reservoir-foundation problems [38.2, 3.1, 2022, Pages 65-76]
Babazadeh, A. An application of stochastic user equilibrium assignment in the origin-destination matrix estimation [38.2, 1.1, 2022, Pages 99-108]
Badamchi, K. Numerical investigation of Buckling behavior of steel pipeline affected by eccentric axial compression subjected to external pressure [38.2, 1.1, 2022, Pages 135-143]
Baghbani, A.H. Optimum light weight concrete mix design against high temperature [38.2, 1.1, 2022, Pages 69-78]
Baizidi, M. Estimation of the peak response of nonlinear systems under the effect of near-field design spectrum using equivalent linearization methods [38.2, 2.2, 2022, Pages 89-98]
Bakhshi, A. Crack detection in masonry structures using computer vision based on deep learning [38.2, 2.1, 2022, Pages 99-108]
Bakhshi, A. Crack detection in concrete members using encoder-decoder models based on deep learning [38.2, 2.2, 2022, Pages 79-88]
Damroodi, M. Experimental investigation of the impact of the spoiler and piggyback line on scour holes of the parallel pipe lines under the erodible bed [38.2, 1.2, 2022, Pages 3-14]
Darrehzereshki, M. Numerical study of a novel bolted moment connection for the beam to column connection using T-shapes and web angle sections [38.2, 2.2, 2022, Pages 99-110]
Darvishan, E. Investigation of effect of size and content of nano/SiO2 on the strength and durability of RCC in freezing-thawing cycles [38.2, 1.2, 2022, Pages 145-154]
Dehghani, S. The Effect of Knowledge Management Infrastructure through Knowledge Management Processes on the Performance of Temporary Teams in the Project [38.2, 4.1, 2023, Pages 85-96]
Dehnad, M.H. Evaluation the effects of the Covid-19 pandemic on choosing active travel modes [38.2, 2.2, 2022, Pages 3-14]
Dezhkam, B. Damage Detection and Identification in a Column under the Effect of Axial Load Using Modal Properties and Mode Shape-based Detection Index [38.2, 4.2, 2023, Pages 53-62]
E
Emami Tabrizi, Mehrdad DEM investigation of the crack effect on the behavior of brittle granular materials subjected to one-dimensional compression [38.2, 1.1, 2022, Pages 109-121]
Enteghami Mayan, S. Experimental Investigation of Oxy-acetylene Welding and Arc Welding with Steel, Brass, and Bronze Electrodes [38.2, 2.2, 2022, Pages 111-119]
Entezami, A.R. Robust-to-noise feature extraction via generalization of correlation relationship in the frequency domain [38.2, 4.2, 2023, Pages 25-36]
Esfahani, M. R. Analysis and strengthening of RC exterior beam-column joints considering column axial force variation [38.2, 4.1, 2023, Pages 37-52]
Esfehani, ُS.A. H. Robust-to-noise feature extraction via generalization of correlation relationship in the frequency domain [38.2, 4.2, 2023, Pages 25-36]
Eshghi Nezami, M.A. The Social Impacts of Infrastructure Failure: Estimation of the Value of a Statistical Life for Community Resilience Analysis in Iran [38.2, 1.2, 2022, Pages 99-108]
Eskandari Ghadi, M. Development of the Multiquadric mesh-less method for analyzing the dynamic interaction of dam-reservoir-foundation problems [38.2, 3.1, 2022, Pages 65-76]
Esmaeilzadeh, S.R. Behavioral modeling of the impact of Internet taxis on the car dependency [38.2, 2.2, 2022, Pages 67-77]
Esmaili, K. Experimental investigation of the impact of the spoiler and piggyback line on scour holes of the parallel pipe lines under the erodible bed [38.2, 1.2, 2022, Pages 3-14]
Esmaili, K. Smart-particle application for describing the probabilistic particle transport dynamics above threshold conditions [38.2, 2.2, 2022, Pages 43-53]
Esmaili, S. A. The Study Impact of Effective Factors in Sediment Transport in Unsteady Flow [38.2, 1.1, 2022, Pages 145-155]
F
Fakhimi, A. A. Coupled effect of loading rate and notch length on tensile strength of rock [38.2, 2.1, 2022, Pages 87-98]
Farhadi, H Smart-particle application for describing the probabilistic particle transport dynamics above threshold conditions [38.2, 2.2, 2022, Pages 43-53]
Fayyaz, M. Evaluation of textile concrete behavior in the accelerated shelter [38.2, 3.1, 2022, Pages 15-25]
Fazlalipour, N. Experimental and theoretical study of buckling behavior of steel cylindrical shells with variable wall thicknesses under combined loading of axial compression and external pressure [38.2, 1.2, 2022, Pages 169-177]
Ghandehary, M. Evaluation of Linear Static Approach in Performance-Based Design of Steel Bending Frames [38.2, 3.2, 2022, Pages 67-77]
Ghasemi, S. Experimental evaluation of the effect of steel and polypropylene fibers and recycled aggregates on the mechanical properties of concrete [38.2, 3.2, 2022, Pages 21-32]
Ghassemieh, M. Numerical study of a novel bolted moment connection for the beam to column connection using T-shapes and web angle sections [38.2, 2.2, 2022, Pages 99-110]
Ghazavi, M. Numerical investigation of the effect of shaft surface geometry of tapered pile group with circular and square cross-sections on bearing capacity and group efficiency inquiry [38.2, 4.1, 2023, Pages 61-71]
Ghiami Azad, A.R. Numerical study of a novel bolted moment connection for the beam to column connection using T-shapes and web angle sections [38.2, 2.2, 2022, Pages 99-110]
Gholamrezaie, A.P Evaluation of behavior of reinforced concrete shear wall with irregular opening due to near-fault earthquake [38.2, 2.2, 2022, Pages 29-41]
Gholi, H. An application of stochastic user equilibrium assignment in the origin-destination matrix estimation [38.2, 1.1, 2022, Pages 99-108]
Gholipour, K. Investigation of the effect of preload on the mechanical properties of fiber-reinforced geopolymer concrete [38.2, 3.2, 2022, Pages 43-53]
Ghorab, Kh, An integrated framework using Augmented Reality (AR) and Building Information Modeling (BIM) for enhancing the stakeholders' interaction in 4d modeling of linear projects [38.2, 1.1, 2022, Pages 79-85]
Gohari, S. The Study Impact of Effective Factors in Sediment Transport in Unsteady Flow [38.2, 1.1, 2022, Pages 145-155]
Gorbanpoor, V. DEM investigation of the crack effect on the behavior of brittle granular materials subjected to one-dimensional compression [38.2, 1.1, 2022, Pages 109-121]
H
Haddad, A. Evaluation of the vertical bearing capacity and settlement of bucket foundation in saturated sand [38.2, 4.1, 2023, Pages 3-11]
Hanteh, M. Development of the integrated MARS-PSO and ELM-PSO models for estimating the compressive strength of concrete in circular concrete columns confined with FRP polymer fibers [38.2, 2.1, 2022, Pages 117-129]
Hanteh, M. Evaluation of Linear Static Approach in Performance-Based Design of Steel Bending Frames [38.2, 3.2, 2022, Pages 67-77]
Hasani, A.H. Investigation of the behavior of short moment-resisting steel frames with rigid connections during earthquake damage in two cases of post-earthquake fire and post-fire earthquake [38.2, 3.2, 2022, Pages 3-10]
Hassanlourad, M. Evaluation of interface shear strength properties of geosynthetic with Recycled concrete and Asphalt waste by direct shear test [38.2, 2.1, 2022, Pages 27-47]
Hassanlourad, M. Evaluation of the static and multistage geocell pullout behavior in coarse grained soil [38.2, 2.2, 2022, Pages 121-130]
Heidari, A. Laboratory study of the effect of adding glass fibers on reactive powdered concrete [38.2, 4.1, 2023, Pages 25-36]
Heiraty, H. Evaluation of interface shear strength properties of geosynthetic with Recycled concrete and Asphalt waste by direct shear test [38.2, 2.1, 2022, Pages 27-47]
Hemmati, S. Active Length of Natural Gas Pipeline Subjected to Landslide [38.2, 2.1, 2022, Pages 3-15]
Heydari, M. The Study Impact of Effective Factors in Sediment Transport in Unsteady Flow [38.2, 1.1, 2022, Pages 145-155]
I
Izadi Zamanabadi, E. Extending a model of loss seismic risk resulting from production interrupt at gas refinery units (case study: Parsian Gas Refinery) [38.2, 3.2, 2022, Pages 33-41]
J
Jabbari, E. Experimental evaluation of flow turbulence in bottom outlet control gate of dams based on Kolmogorov theory [38.2, 1.1, 2022, Pages 123-134]
Jabbari, E. Development of the Multiquadric mesh-less method for analyzing the dynamic interaction of dam-reservoir-foundation problems [38.2, 3.1, 2022, Pages 65-76]
Jahangiri, R. Investigation of buckling Behavior of functionally graded thin-walled box beams under axial loading [38.2, 4.2, 2023, Pages 37-51]
Jahankhah, H. Increasing the accuracy of two-dimensional image processing techniques to estimate stress-strain curves in triaxial tests [38.2, 3.2, 2022, Pages 55-65]
Jalali, M. Experimental evaluation of the effect of steel and polypropylene fibers and recycled aggregates on the mechanical properties of concrete [38.2, 3.2, 2022, Pages 21-32]
Jalili, J. Increasing the accuracy of two-dimensional image processing techniques to estimate stress-strain curves in triaxial tests [38.2, 3.2, 2022, Pages 55-65]
K
Kashani, H. The Social Impacts of Infrastructure Failure: Estimation of the Value of a Statistical Life for Community Resilience Analysis in Iran [38.2, 1.2, 2022, Pages 99-108]
Kashian, S. Feasibility study on promoting the value of large-scale construction projects using the combination of value engineering and the ANFIS method [38.2, 4.1, 2023, Pages 13-22]
Keshavarz bahaghighat, M. Investigation of the effect of descending injection on the formation of calcite crystals in bio-cementation of sandy soils [38.2, 1.1, 2022, Pages 87-98]
Khaloo, A.R. Effective width estimation of L-shaped RC shear walls using EPR algorithm [38.2, 4.2, 2023, Pages 63-71]
Khanahmadi, M. Debonding Damage Detection and Assessment in a CFST Composite Column Using Modal Dynamic Data [38.2, 3.1, 2022, Pages 53-63]
Khanahmadi, M. Damage Detection and Identification in a Column under the Effect of Axial Load Using Modal Properties and Mode Shape-based Detection Index [38.2, 4.2, 2023, Pages 53-62]
Khayat, N. Experimental investigation of Strength and Microstructural behavior variations of oil contaminated clay (Area: Masjedsoleyman) [38.2, 4.2, 2023, Pages 73-81]
Kheiri, A. Modeling factors affecting utility to use internet taxi under Covid-19 [38.2, 2.2, 2022, Pages 55-65]
Maghrebi, M. Development of a hybrid method of social force modeling and discrete event simulation to optimize productivity of construction [38.2, 4.2, 2023, Pages 3-14]
Mahmudi Moghadam, Amin Turbulence structures and sediment transport of different countermeasure roughness of the squire bridge pier [38.2, 2.1, 2022, Pages 17-26]
Mahpour, A.R. Investigating the role of latent individual components in the acceptance of demand management policies: Case study of Tehran odd-even policy [38.2, 3.1, 2022, Pages 41-52]
Makhdoumi Darmian, H. Investigating and copmaring the most effective methods to improve post-fire performance of steel short columns with vertical and horizontal defects [38.2, 3.1, 2022, Pages 77-88]
Malek, H. Development of the integrated MARS-PSO and ELM-PSO models for estimating the compressive strength of concrete in circular concrete columns confined with FRP polymer fibers [38.2, 2.1, 2022, Pages 117-129]
Mamazizi, A. Debonding Damage Detection and Assessment in a CFST Composite Column Using Modal Dynamic Data [38.2, 3.1, 2022, Pages 53-63]
Mamdoohi, A. R. Behavioral modeling of the impact of Internet taxis on the car dependency [38.2, 2.2, 2022, Pages 67-77]
Mamdoohi, A.R. An application of stochastic user equilibrium assignment in the origin-destination matrix estimation [38.2, 1.1, 2022, Pages 99-108]
Mamdoohi, A.R. Modeling factors affecting utility to use internet taxi under Covid-19 [38.2, 2.2, 2022, Pages 55-65]
Marandi, S. M. Evaluation of the performance of a multi-layer Landfill side slope insulation system under external hydrostatic loading [38.2, 3.2, 2022, Pages 79-86]
Massumi, A. Seismic Resilience Analysis of High-Rise Diagrid Structures with Various Skeletal Configurations Based on Robustness Criterion [38.2, 2.2, 2022, Pages 15-28]
Meshkat Dini, A. Seismic Resilience Analysis of High-Rise Diagrid Structures with Various Skeletal Configurations Based on Robustness Criterion [38.2, 2.2, 2022, Pages 15-28]
Mirabi, M. H. Experimental evaluation of flow turbulence in bottom outlet control gate of dams based on Kolmogorov theory [38.2, 1.1, 2022, Pages 123-134]
Mirhaji, V. Investigation of buckling Behavior of functionally graded thin-walled box beams under axial loading [38.2, 4.2, 2023, Pages 37-51]
Mirmoezi, S.M.M. Theoretical model of built, operate and transfer contracts in a complex environment Multi-case study: Iran freeway partnership agreements [38.2, 3.1, 2022, Pages 27-40]
Mirnaseri, M.H. Evaluation the effects of the Covid-19 pandemic on choosing active travel modes [38.2, 2.2, 2022, Pages 3-14]
Mirzaii, A. Optimum light weight concrete mix design against high temperature [38.2, 1.1, 2022, Pages 69-78]
Mirzaii, A. Continuous Measurement of Matrix Suction and Degree of Saturation of Unsaturated Soils with a New Soil-Water Retention Curve Device [38.2, 2.1, 2022, Pages 109-115]
Mohamadi, Z. Static analysis of axisymmetric 3-D layered transversely isotropic thick cylindrical shells by displacement potential function [38.2, 3.1, 2022, Pages 3-14]
Mohamadzadeh Romiani, H. Numerical investigation of the anisotropic behavior of the sand in drained condition [38.2, 1.1, 2022, Pages 3-14]
Mohammadi, Saeideh Effect of silt content on cyclic and post-cyclic behavior of saturated loose sand [38.2, 2.1, 2022, Pages 75-85]
Mohammadizadeh, M. Investigating and copmaring the most effective methods to improve post-fire performance of steel short columns with vertical and horizontal defects [38.2, 3.1, 2022, Pages 77-88]
Mohammady Garfamy, H. Damage Detection and Identification in a Column under the Effect of Axial Load Using Modal Properties and Mode Shape-based Detection Index [38.2, 4.2, 2023, Pages 53-62]
MolaAbasi, H. The effect of cement and zeolite on undrained shear strength of the expansive clay [38.2, 3.2, 2022, Pages 11-20]
Mortezaie, M. Continuous Measurement of Matrix Suction and Degree of Saturation of Unsaturated Soils with a New Soil-Water Retention Curve Device [38.2, 2.1, 2022, Pages 109-115]
Mousavi, M. Crack detection in masonry structures using computer vision based on deep learning [38.2, 2.1, 2022, Pages 99-108]
Mousavi, M. Crack detection in concrete members using encoder-decoder models based on deep learning [38.2, 2.2, 2022, Pages 79-88]
Mousavi, M. Extending a model of loss seismic risk resulting from production interrupt at gas refinery units (case study: Parsian Gas Refinery) [38.2, 3.2, 2022, Pages 33-41]
N
Naderan, A. Evaluation the effects of the Covid-19 pandemic on choosing active travel modes [38.2, 2.2, 2022, Pages 3-14]
Naderi, A. Investigation of buckling Behavior of functionally graded thin-walled box beams under axial loading [38.2, 4.2, 2023, Pages 37-51]
Naderi, M. Investigation of Durability of Self-Compacting Concretes Made of Different Aggregates under the Influence of Sulfate Environment using twist-off test [38.2, 1.1, 2022, Pages 59-67]
Naderishourabi, F. Laboratory study of the effect of adding glass fibers on reactive powdered concrete [38.2, 4.1, 2023, Pages 25-36]
Naeimirad, M,. Development of a hybrid method of social force modeling and discrete event simulation to optimize productivity of construction [38.2, 4.2, 2023, Pages 3-14]
Naeini, A. Effect of silt content on cyclic and post-cyclic behavior of saturated loose sand [38.2, 2.1, 2022, Pages 75-85]
Naeini, S.A. Continuous Measurement of Matrix Suction and Degree of Saturation of Unsaturated Soils with a New Soil-Water Retention Curve Device [38.2, 2.1, 2022, Pages 109-115]
Namaei-kohal, A. Evaluation of the static and multistage geocell pullout behavior in coarse grained soil [38.2, 2.2, 2022, Pages 121-130]
Narmashiri, K. Investigating and copmaring the most effective methods to improve post-fire performance of steel short columns with vertical and horizontal defects [38.2, 3.1, 2022, Pages 77-88]
Nassiraei, H. Behavior of tubular X-joints retrofitted with external ring subjected to compressive loading [38.2, 2.1, 2022, Pages 63-73]
Nateghi Alahi, F. Investigation of the behavior of short moment-resisting steel frames with rigid connections during earthquake damage in two cases of post-earthquake fire and post-fire earthquake [38.2, 3.2, 2022, Pages 3-10]
Navayi Neya, B. Static analysis of axisymmetric 3-D layered transversely isotropic thick cylindrical shells by displacement potential function [38.2, 3.1, 2022, Pages 3-14]
Navayi Neya, B. Potential functions of thermoelastodynamic problems for transversely isotropic functional graded materials [38.2, 4.2, 2023, Pages 15-24]
Nazari, S. Increasing the accuracy of two-dimensional image processing techniques to estimate stress-strain curves in triaxial tests [38.2, 3.2, 2022, Pages 55-65]
Nobakht Vakili, K. Estimation of the peak response of nonlinear systems under the effect of near-field design spectrum using equivalent linearization methods [38.2, 2.2, 2022, Pages 89-98]
Nobakht Vakili, K. Debonding Damage Detection and Assessment in a CFST Composite Column Using Modal Dynamic Data [38.2, 3.1, 2022, Pages 53-63]
Oliaei, M. 3D numerical modeling of geothermal tunnels and receivable energy [38.2, 2.1, 2022, Pages 41-50]
Ostadhossein, H. Optimum light weight concrete mix design against high temperature [38.2, 1.1, 2022, Pages 69-78]
P
Palizi, S. Reliability analysis of FRP-timber system [38.2, 3.1, 2022, Pages 89-100]
Panahi, O. Evaluation of Linear Static Approach in Performance-Based Design of Steel Bending Frames [38.2, 3.2, 2022, Pages 67-77]
Panahi, S. Potential functions of thermoelastodynamic problems for transversely isotropic functional graded materials [38.2, 4.2, 2023, Pages 15-24]
Panahy, M.Q. Optimum light weight concrete mix design against high temperature [38.2, 1.1, 2022, Pages 69-78]
Paydar, A. Feasibility study on promoting the value of large-scale construction projects using the combination of value engineering and the ANFIS method [38.2, 4.1, 2023, Pages 13-22]
Pouraminian, M. Damage Detection and Identification in a Column under the Effect of Axial Load Using Modal Properties and Mode Shape-based Detection Index [38.2, 4.2, 2023, Pages 53-62]
Rafiee Dehkharghani, R. Investigation of periodic resonators as wave barriers for mitigating surface seismic waves using Bloch-Floquet theory [38.2, 4.1, 2023, Pages 53-60]
Rahgozar, R. Investigating and copmaring the most effective methods to improve post-fire performance of steel short columns with vertical and horizontal defects [38.2, 3.1, 2022, Pages 77-88]
Rajaee, T. Experimental evaluation of flow turbulence in bottom outlet control gate of dams based on Kolmogorov theory [38.2, 1.1, 2022, Pages 123-134]
Rajaie, S.H. Experimental investigation of the impact of the spoiler and piggyback line on scour holes of the parallel pipe lines under the erodible bed [38.2, 1.2, 2022, Pages 3-14]
Rashvand Aveh, A. Investigation of Durability of Self-Compacting Concretes Made of Different Aggregates under the Influence of Sulfate Environment using twist-off test [38.2, 1.1, 2022, Pages 59-67]
Roshani, M. Seismic Resilience Analysis of High-Rise Diagrid Structures with Various Skeletal Configurations Based on Robustness Criterion [38.2, 2.2, 2022, Pages 15-28]
Saberi Vaezaneh, A. Investigation of Durability of Self-Compacting Concretes Made of Different Aggregates under the Influence of Sulfate Environment using twist-off test [38.2, 1.1, 2022, Pages 59-67]
Sadat Naseri, Sh. Optimization of critical slip surface in unsaturated slopes subjected to rain infiltration by CBO algorithm [38.2, 2.1, 2022, Pages 51-61]
Sadeghi, A. Experimental Investigation of Oxy-acetylene Welding and Arc Welding with Steel, Brass, and Bronze Electrodes [38.2, 2.2, 2022, Pages 111-119]
Sadeghi, H. Optimization of critical slip surface in unsaturated slopes subjected to rain infiltration by CBO algorithm [38.2, 2.1, 2022, Pages 51-61]
Sadeghigar, T. Turbulence structures and sediment transport of different countermeasure roughness of the squire bridge pier [38.2, 2.1, 2022, Pages 17-26]
Sadr Momtazi, A. Investigation of the effect of preload on the mechanical properties of fiber-reinforced geopolymer concrete [38.2, 3.2, 2022, Pages 43-53]
Saedi Daryan, A. Investigating and copmaring the most effective methods to improve post-fire performance of steel short columns with vertical and horizontal defects [38.2, 3.1, 2022, Pages 77-88]
Saeedi Shahrivar, S. Investigating the role of latent individual components in the acceptance of demand management policies: Case study of Tehran odd-even policy [38.2, 3.1, 2022, Pages 41-52]
Saffarian, M.J. Numerical investigation of the anisotropic behavior of the sand in drained condition [38.2, 1.1, 2022, Pages 3-14]
Salehi, H. Investigating the influence of parent concrete on mechanical properties of recycled concrete [38.2, 1.1, 2022, Pages 47-57]
Salehi, S. Turbulence structures and sediment transport of different countermeasure roughness of the squire bridge pier [38.2, 2.1, 2022, Pages 17-26]
Salimi, M.R. Estimation of the peak response of nonlinear systems under the effect of near-field design spectrum using equivalent linearization methods [38.2, 2.2, 2022, Pages 89-98]
Seyedi Niaki, K. Experimental evaluation of flow turbulence in bottom outlet control gate of dams based on Kolmogorov theory [38.2, 1.1, 2022, Pages 123-134]
Shabanpour, A.R. Numerical investigation of the effect of shaft surface geometry of tapered pile group with circular and square cross-sections on bearing capacity and group efficiency inquiry [38.2, 4.1, 2023, Pages 61-71]
Shafaei, J. Experimental evaluation of the effect of steel and polypropylene fibers and recycled aggregates on the mechanical properties of concrete [38.2, 3.2, 2022, Pages 21-32]
Shahhosseini, V. Evaluation of key performance indicators from the perspective of stakeholders in construction projects [38.2, 4.2, 2023, Pages 83-93]
Shakeri, E. Evaluation of key performance indicators from the perspective of stakeholders in construction projects [38.2, 4.2, 2023, Pages 83-93]
Shariatmadar, H. Robust-to-noise feature extraction via generalization of correlation relationship in the frequency domain [38.2, 4.2, 2023, Pages 25-36]
Sheikhahmadi, S. R. 3D numerical modeling of geothermal tunnels and receivable energy [38.2, 2.1, 2022, Pages 41-50]
Shervani Tabar, B. Experimental Investigation of Oxy-acetylene Welding and Arc Welding with Steel, Brass, and Bronze Electrodes [38.2, 2.2, 2022, Pages 111-119]
Shirkavand, A. The effect of cement and zeolite on undrained shear strength of the expansive clay [38.2, 3.2, 2022, Pages 11-20]
Showkati, H. Numerical investigation of Buckling behavior of steel pipeline affected by eccentric axial compression subjected to external pressure [38.2, 1.1, 2022, Pages 135-143]
Showkati, H. Experimental and theoretical study of buckling behavior of steel cylindrical shells with variable wall thicknesses under combined loading of axial compression and external pressure [38.2, 1.2, 2022, Pages 169-177]
Sobhiyah, M. H. The Effect of Knowledge Management Infrastructure through Knowledge Management Processes on the Performance of Temporary Teams in the Project [38.2, 4.1, 2023, Pages 85-96]
Sobhiyah, M.H. Theoretical model of built, operate and transfer contracts in a complex environment Multi-case study: Iran freeway partnership agreements [38.2, 3.1, 2022, Pages 27-40]
Soltani Afarani, F. Experimental investigation of Strength and Microstructural behavior variations of oil contaminated clay (Area: Masjedsoleyman) [38.2, 4.2, 2023, Pages 73-81]
T
Tabiee, M. Effective width estimation of L-shaped RC shear walls using EPR algorithm [38.2, 4.2, 2023, Pages 63-71]
Taghaddos, H. An integrated framework using Augmented Reality (AR) and Building Information Modeling (BIM) for enhancing the stakeholders' interaction in 4d modeling of linear projects [38.2, 1.1, 2022, Pages 79-85]
Tajaddini, A. Feasibility study on promoting the value of large-scale construction projects using the combination of value engineering and the ANFIS method [38.2, 4.1, 2023, Pages 13-22]
Toufigh, V. Reliability analysis of FRP-timber system [38.2, 3.1, 2022, Pages 89-100]
V
Valyrakis, M. Smart-particle application for describing the probabilistic particle transport dynamics above threshold conditions [38.2, 2.2, 2022, Pages 43-53]
Vasseghi, A. Active Length of Natural Gas Pipeline Subjected to Landslide [38.2, 2.1, 2022, Pages 3-15]
Y
Yazdani, A. Estimation of the peak response of nonlinear systems under the effect of near-field design spectrum using equivalent linearization methods [38.2, 2.2, 2022, Pages 89-98]
Zahiri, A. Smart-particle application for describing the probabilistic particle transport dynamics above threshold conditions [38.2, 2.2, 2022, Pages 43-53]
Zakeri, R. Numerical investigation of the anisotropic behavior of the sand in drained condition [38.2, 1.1, 2022, Pages 3-14]
Ziaalhagh, S.M.S m Analysis and strengthening of RC exterior beam-column joints considering column axial force variation [38.2, 4.1, 2023, Pages 37-52]
